Fire truck

Ford Transit 2.2 TDCI 4x2, Krankentransporter

Condition: used, mileage: 206,500 km, power: 114 kW (155.00 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,869 kg, maximum load weight: 631 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, traction control, Vehicle location: Bovenden, E-window left, E-window right, switch 6, ABS (anti-lock braking system), traction control system (ASR), rotating beacon, leaf suspension, doors, side door right, environmental badge green Body: Patient transport vehicle with fold-out wheelchair ramp Engine and gearbox overhauled in 08.22, total costs approx. 10,000€. Sale to tradesmen or export plus 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nljdpfxevhixtj Agreg - .

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation. Nedpfx Ajb Uyizjgrolg

Condition: good (used), Year of construction: 2006, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: Bramidan, cabinet baler, vertical baler -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure pressure: 50 t Nljdpfx Agjxnb Nyerjg -Bale size: 1360 780 x H1200 mm -Bald weight of cardboard: 400 - 500 kg -Bald weight plastic: 450 - 600 kg -Filling opening: WxH 1350 x 760 mm -Bale ejection device: Bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Nsdpoh H Ngtsfx Agrjlg Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargo trailers, roll trailers, cargo trailers -Heavy-duty transport wagon: industrial trailer Nsdjl Ab D Hspfx Agrelg -Platform: 17470/2545/H850 mm -Load capacity: approx. 85 t -Tires: Solid rubber -Quantity: 1 piece available -Empty weight: 8000 kg

Condition: new, functionality: fully functional, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 03/2026, fuel type: diesel, empty load weight: 2,400 kg, maximum load weight: 1,100 kg, overall weight: 3,500 kg, tire size: 225/65 R16 C, tire condition: 100 %, wheelbase: 4,215 mm, next inspection (TÜV): 03/2028, fuel: diesel, fuel tank capacity: 80 l, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 18 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, operation weight: 2,400 kg, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, immobilizer system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, second-hand vehicle warranty, soot filter, spoiler, start-stop system, summer tires, tire pressure monitoring, traction control, truck registration, EU – Vehicle with warranty. Box truck Load compartment length – 4200 mm Load compartment width – 2200 mm Load compartment height – 2300 mm Sliding tarpaulin – left side Number of Euro pallet spaces – 8 Payload approx. 1100 kg Cruise control Parking assistance system – front, side, and rear Air conditioning On-board computer 80-liter tank Wooden floor Electric windows Central locking with remote control Turn signals in exterior mirrors Extended exterior mirrors Reinforced suspension Spare wheel Nlsdoibu U Depfx Agreg Available in approximately 3-4 weeks. Also available in white. Photos are examples of a vehicle to be ordered. Delivery, leasing, or financing options available. Contact: Auto-Wardenga Irenäus Wardenga, also available via WhatsApp.

Condition: new, Year of construction: 2026, Yanigav Pile Driver HP790 / HPG790 • Weight: 750kg / 900kg • Dimensions (LxWxH): 1.40x2.55x2.55m • Blows per minute: 560–1600 • Impact energy: 170 Joules • Bell inner diameter: 80-120-140mm • 180° rotatable • Drive: tractor hydraulic pump / own hydraulic pump Nedpfx Ager Eziporslg Price: €21,000 / €23,500

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Nljdpfx Ager Eqbyorsg Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2025, Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version; chamber size: L350xW(100-400)mm, multi-tray processing possible within the range (at a surcharge); max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protective gas generation and sealing); gas flushing mixture: N2 or N2+CO2; output of pump for gas flushing: 63m³/h; current: 3PH, 380/200V; machine dimensions: L2950xW940xH1700mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpfxov Nmb Io Agrjlg

Condition: used, mileage: 166,794 km, power: 74 kW (100.61 HP), first registration: 07/2012, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Engine warning light, possibly related to the particulate filter * Trailer coupling, special equipment: Rear wing doors with glazing, load compartment partition, high, behind driver and passenger, with window (deformable for driver's seat back) Additional equipment: Nsdpfozdwtmex Agrslg Airbag, driver's side, turn signal integrated into exterior mirror, city lights, double locking system, tachometer, electronic differential lock (EDS), driving assistance system: hill start assist, rear wing doors (opening angle 180 degrees), heater with recirculation, body variant: medium-height roof, headlight range adjustment, engine 2.2 L - 74 kW TDCi CAT, production facility: Otosan, wheelbase 3300 mm, wheel covers, low emissions according to emission standard Stage 5 / Euro 5, sliding door, cargo/passenger compartment, right-hand side, mud flaps, front and rear, seat package 22: driver's seat (3-way adjustable) - passenger double seat, tinted glazing, lining in the cargo/passenger compartment: hard fiber.