Universal testing machine concrete sample press adhesive tensile tester

FORM & TEST UPB 86 / 200

Condition: excellent (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Weight: 1100 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Dpnwvl (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used S3Al0Qox Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer a temperature shock test chamber. with 100 liters of usable space for larger test specimens up to 30 kg. Compliant with all current international standards. Water cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Bdqohbqou9K Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version 2 test material baskets made of stainless steel Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Type: TSD-100 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Condition Used This listing is for a Pall Palltronic Compact 200 Filter Integrity Test Unit. C93Evcy The unit is in full working condition and is ready for immidate realese.

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, Travel distance X-axis: 350 mm, Travel distance Y-axis: 250 mm, Travel distance Z-axis: 300 mm, Workpiece weight (max.): 500 kg, Total height: 23,980 mm, Total width: 16,900 mm, Total length: 19,000 mm, Quill stroke: 300 mm, Workpiece length (max.): 790 mm, Workpiece width (max.): 530 mm, Workpiece height (max.): 275 mm, Overall weight: 2,800 kg, Tank capacity: 410 l, GF Machining Solutions FORM 200 Year of manufacture 2016 Die-sinking EDM machine in C-design Fixed table with lowerable container Travels (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (optional) Max. Electrode weight: 50 kg Max. Inertia: 2000 kgcm² Without electrode changer Incl. option connection to automation AC FORM HMI user interface Operation via 15" LCD color display with touchscreen Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg The machine is cleaned and serviced by us after receipt of the order. This is followed by an erosion test. We will be happy to commission the machine on your premises and provide operating instructions. Fzilj8K Optional: - Transportation - Cooling unit - Dielectric - Clamping device

Condition: used, Year of construction: 2012, Functionality: fully functional, The used Agie Charmilles Form 200 mS I Die Sinking EDM machine from 2012, located in Belgium. It features a spacious 500 x 400 mm working area and a robust 500 kg workpiece weight capacity. Equipped with laser measurement and Renishaw, this machine offers precise and efficient die sinking capabilities. Agie Charmilles, a part of GF Machining Solutions, is renowned for its expertise in electrical discharge machining (EDM) and high-precision manufacturing. Their innovative product line caters to industries that require intricate and high-precision components, including aerospace, automotive, and mold and die manufacturing. Technical specifications: X-Axis travel: 350 mm Y-Axis travel: 250 mm Z-Axis travel: 300 mm Working Area: 500 x 400 mm Workpiece Weight Capacity: 500 kg Work Tank Size: 790 x 530 x 350 mm Dimensions: Length: 1900 mm Width: 1690 mm Height: 2398 mm Weight: 2800 Kg Includes the following: -Laser measurement. -Renishaw. -Many tools included. Ocru0Sxwel ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: excellent (used), CTS Temperature Test Chamber CTS T-40/200 EX/I CTS Temperature test chamber CTS T-40/200 EX/I 200L 142137 Cj2Ffn3Rwi -40 to + 180°C heating 4 K/min cooling 4 K/min Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Feutron Type: 3423/16 Air-cooled climatic test chamber Nominal test chamber volume: 280 liters Dimensions Test chamber exterior: 1500 x 2040 x 1075 mm Dkvy2Rp9P Fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: -40 to +100 C Heating: 3.0 K /min on average Cooling air conditioning mode: 0.6 K /min Temperature mode: 3.0 K /min on average Climate range +10 to +95 C Humidity range: 10 to 95 % r.h. Humidity difference, temporal: ≤ ± 3.0 Entry port 1 piece, side panel left 75 mm ∅ Feed-through opening 1 piece, side wall right 75 mm ∅ Water connection humidifier: city water or distilled water 20 l storage tank Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 550 kg Refrigerant: R134 a / R507 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, almost unused ULMA FM 200 C flow wrapping machine DESCRIPTION Oysdl2Rc Ideal machine for a wide range of applications in the fresh produce industry Easily accessible roll holder that simplifies the loading of heavy rolls Touchscreen control panel allows easy and very intuitive access to machine parameters Motorized height adjustment of the longitudinal sealing system for quick and easy adjustments Box-shaped transverse sealing station is equipped with an overpressure system to ensure high quality hermetic sealing TECHNICAL DETAILS Product length: min. 100 mm product width: 10 - 300 mm Product height: 10 - 120 mm Output: 55 products/min or 20 m/min Infeed conveyor: 2 m Film width: 700 mm Film type: Composite films with barrier PA/PE or similar / shrink film BDF MACHINE DETAILS Dimensions: 5215 x 1665 x 1750 mm Machine weight: 1200 kg Electrical connection: 230 / 400 V; 50/60 Hz Power consumption: 6 kVA Air consumption: 350 l/min; 6 bar

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, Travel distance X-axis: 350 mm, Travel distance Y-axis: 250 mm, Travel distance Z-axis: 300 mm, Workpiece weight (max.): 500 kg, Total height: 23,980 mm, Total width: 16,900 mm, Total length: 19,000 mm, Quill stroke: 300 mm, Workpiece length (max.): 790 mm, Workpiece width (max.): 530 mm, Workpiece height (max.): 275 mm, Overall weight: 2,800 kg, Tank capacity: 410 l, GF Machining Solutions FORM 200 Sp Year of manufacture 2013 Die-sinking EDM machine in C-design Fixed table with lowerable container Travels (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (optional) Max. Electrode weight: 50 kg Max. Inertia: 2000 kgcm² Including 16x electrode changer (Rotary tool changer RTC) AC FORM HMI user interface Operation via 15" LCD color monitor with touchscreen Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm (plus RTC) Total weight: 2800 kg The machine is cleaned and serviced by us after receipt of the order. This is followed by an erosion test. We will be happy to commission the machine on your premises and provide operating instructions. Optional: - Transportation - Cooling unit - Dielectric Hu2Uhvw - Clamping device

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Ddm37Mo2K Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Cv9Ihxihwa Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 75 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Cjjscgznvc Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2020, Operating hours: 477 h, Condition: used, Drive type: Diesel, Load capacity: 200 kg, Arm reach: 4,800 mm, Net weight: 3,000 kg, Working height: 8,400 mm, Special working platform Technical condition: good Description: Standard track width: 1435mm, hydrostatic track drive and braking system, upper carriage rotation for easier single-railing, automatic leveling to compensate for overhang Standard equipment: Tool box, first aid box, fire extinguisher + holder, extra light in the workman basket, entry height limiter (OLE key switch), incl. 1 x brake shoe type 500864 Libo2 (100211), display 4.3 in the workman basket Standard track width: 1435mm, hydrostatic drive and braking system. R8Ob2Yxel2

Year of construction: 2021, Condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Ohg3Rys8M Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21.5 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 Lxoor -Number: 2x motors available -Price: per piece -Dimensions: 450/250/H220 mm -Weight: 25.4 kg

Condition: used, Year of construction: 1997, Used Case Erector Ape 1997 Case Erector with hot glue closure under part model form 2000 hm sx manufacturer APE Nordson glue heater Possibility of forming and closing various carton formats Painted iron frame with stainless steel panels Accident prevention protections Production about 2 000 cartons per hour The machine is in accordance with CE year 1997 with manuals Used until December 2021 see video Fn9Sqyp

Condition: not inspected (used), Year of construction: 1996, roundness measuring device : bearing ? roundness meas. dev: support surface dia. ? roundness measuring device : loading ? N accessories: OHNE Zubehör / OHNE PC table diameter 150 mm Gpda2C chucking diameter 100 mm weight of the machine ca. ? t dimensions of the machine ca. - m From vocational school - used for training purposes only

Year of construction: 2008, Operating hours: 41,370 h, Condition: ready for operation (used), Additional Equipment WORKING HEAD WITH ECO C-AXIS QUILL EQUIPMENT EROWA OPERATOR CONSOLE ON ADJUSTABLE FOOT ELECTRODE CHANGER 40 POS Electrical elements automation for cabinet connection box EROWA turntable and gripper Double gripper This erosion machine was manufactured in 2008. It features a working head with an eco C-axis, quill equipment EROWA, and an operator console on an adjustable foot. It includes an electrode changer with 40 positions, EROWA turntable and gripper, and double gripper. A great addition for precision tasks, the Other AC Form 2000 machine we have for sale is well-equipped. Contact us for further details regarding this erosion machine. Application Types Csqpx3Lpqc EDM

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 2000 Year of construction 2008 Travel: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. Workpiece dimensions (L x W x H): 650 x 580 x 250 mm Max. Workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of your choice EROWA ITS 50 40-fold electrode changer CAPPA Pallet changer for EROWA UPC Work bowl can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-100 rpm); AGIE ISPG high-performance generator with 60 A Best achievable surface Ra 0.1 µm AGIEVISION 5 user interface 15" LCD color screen, mouse or touch screen, lifting keyboard Handbox with LCD display and electronic handwheel Machine weight (net): 3830 kg Machine dimensions (L x W x H): 2630 x 2460 x 2660 mm Dpetil Incl. 6-month warranty on parts and service; Incl. commissioning and instruction on site; The machine is cleaned, overhauled and tested by us after receipt of order. We are also happy to commission the machine on your premises. We also offer the following as an option: - transportation - cooler - Dielectric - Clamping device

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Travel distance X-axis: 400 mm, Travel distance Y-axis: 300 mm, Travel distance Z-axis: 350 mm, Workpiece weight (max.): 800 kg, Workpiece length (max.): 820 mm, Workpiece width (max.): 580 mm, Tank capacity: 500 l, Machine available soon in our Semsales - Switzerland facility. Machine equipped with 3R Workpartner electrodes + parts pallets. System cleaned, overhauled and tested. Bmx3W0Uao3 Further details on request.

Condition: good (used), Year of construction: 1985, For sale is a die-sinking EDM machine of the company Charmille and the type Roboform 200 The machine comes from a company that attaches great importance to maintenance and servicing Technical data: Dimensions: 1675 x 1610 x 2460 mm Weight: approx. 2050 kg Time for temperature stabilization: < 3 h Usable surface: 970 x 570 mm max load: 500 kg T-slots: 3 travel x/Y/Z/C: 320 mm/220 mm/320mm/360° positioning accuracy: 2 µ Maximum speed: x, y, z 15 mm/s c 20 rpm Reservoir Dimension L x W x H: 1610 x 500 x 870 mm capacity: 300 l Weight full/empty: 400 / 120 kg Filter system: 4 cartridges 200 h On request, loading and shipping can be organized Europe-wide. All prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! D7Pcir8 Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti Its model number is Form 1200 HM and it was made in 1994 Currently it is in storage The machine has safety features and comes with manuals C0Sg8La3

Condition: good (used), Functionality: fully functional, The following item is for sale: - Our offer number: 10/130 - Shaker Shaker Vortexer Test tube shaker - Manufacturer:Heidolph - Type:Reax 2000 - Serial number:0987 - 1/min from 200-2400 - Power :220V 50 Hz 42 W - Dimensions: WxDxH 120x140x120 mm - weight : 3,20 kg - optical condition according to photos - used Blluwlbjch0 - functional Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Travel distance X-axis: 350 mm, Travel distance Y-axis: 250 mm, Travel distance Z-axis: 350 mm, TECHNICAL DETAILS X-travel:350 mm Y-travel:250 mm Z-travel: 350 mm EQUIPMENT ISPG generator Agievision software Erowa chuck + UPC pallet holder Bkzicray0Xs Supplied with robot Erowa ERS