Material movable vise

FRITZ WERNER

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Tedpfx Afexl Elyowsb

Condition: used, table diameter 630 mm Tsdsymf U Ejpfx Afweb weight of the machine ca. ca, 0,35 t table height 220 mm

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg Tedpfxsymga No Afwsb

Condition: used, / weight 295 kg Center height: approx. 180mm Tedpsykvbdofx Afwjb dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg

Condition: used, Year of construction: 1986, Machine: TC800 Tedpfx Afex Eyvpewjb Serial number: 25133 Year of manufacture: 1986 Control: Sinumerik System 8 Tool holder: SK50 Travel ranges: X: 1600 / Y: 1000 / Z: 1100 mm Optical measuring system on X, Y, Z axes 2 pallet tables, table area: 800x800 mm Pallet changer system Tool magazine: 60 tools Power supply: 380V, 50Hz, 55kW.

Condition: used, Year of construction: 1986, Machine: TC800 Serial number: 25132 Year of manufacture: 1986 Control: Sinumerik System 8 Tool holder: SK50 Travel: X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallet table surface: 800x800 Pallet exchange system Tool magazine: 60 tools Power supply: 380V 50Hz 55kW. Tedpfxjx Eyt Uj Afwob

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Tsdpszqfxdsfx Afwsb

Condition: used, Year of construction: 1981, functionality: not functional, machine/vehicle number: 24003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Control system modernization, 2007 Control: SINUMERIK 802D sl X/Y/Z axis travel: 1600mm/1200mm/1400mm Tool holder: ISO50 Tool holder diameter: 110 mm Pallet fixture: 800x800 Tedpfezqbbzex Afwsb Table dimensions: 1200x1200 Setting accuracy: 10s

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm Tsdpfx Afov Sm Nqewsb min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: used, Fritz-Werner Model TC 800: Working areas: X-axis: 1,600 mm, Y-axis: 1,000 mm, Z-axis: 1,100 mm Tjdjxura Nspfx Afwob Workpiece carrier (pallets): Clamping surface: 800x800, 800x1,000 mm, changeover time: 38 sec Rotary table division: 360x1 degree, NC table (B-axis): 1/1000 degree, max. load capacity: 2,000 kg Travel paths: Y-axis (min-max): 150-1,150 mm table top/spindle center; Z-axis: 200-1,300 mm table center/front edge spindle Feed rates: Linear 10,000 mm/min; Circular 7,000 mm/min; Rapid traverse 15,000 mm/min Main spindle: Drive power 32 kW, front bearing diameter 100 mm. Steep taper ISO 50, speed range 20-4,500 rpm Weight approx. 25,000 kg Space requirement incl. pallet changer: approx. 5.8 x 5.2 m Tool magazine: Number of stations: 50; chip-to-chip time 12.5 sec; tool change time 4 sec.