Robacta robot welding set

FRONIUS TPS4000CMT

Condition: refurbished (used), Fronius TPS 4000 CMT welding machines All units have been tested. They can be used without any issues as manual welding machines. We have various interfaces available. Simply inquire. Immediately available from stock. Viewing by appointment only. We sell certified welding machines from renowned manufacturers for industrial use. All devices have been function-tested and cleaned. The machines can also be tested on-site. Shipping by freight forwarder is also possible. You will receive an invoice from us including VAT. Nsdpfx Ajt Evqgeb Iecl Take a look at our other listings as well. If you don't find what you're looking for, feel free to send us a message or call. We always have up to 40 units in stock that have not yet been tested or listed.

Condition: new, empty load weight: 190 kg, maximum load weight: 560 kg, overall weight: 750 kg, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, 2-axle car trailer Garden Trailer 264/2 with accessories We offer you the largest lightweight car trailer with a transport area of 264 x 125 cm, with which you can transport loads with a very large volume. The Garden Trailer 264 model is a trailer that will make all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances, electronics or furniture? Nothing could be easier! You can transport everything you need yourself, and loading and unloading is made easier by an inclined drawbar. Car trailer Unitrailer Garden Trailer 264/2 KIPP - Advantages and technical data Ncedpfst Iblbsx Ab Isl A very wide transport area that facilitates the transportation of bulky goods Complete zinc protection against corrosion Above-average durability thanks to additional support beams under the floor and frame reinforcements Active marker lights make it easier to read the trailer position when reversing Highly durable, corrosion-resistant plastic mudguards Rear lighting protected from damage the option of placing the trailer on its back, which means it takes up very little space during storage Wheels attached to the sides of the transport area ensure a lower center of gravity, better handling and no bouncing of the trailer even when driving unloaded

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm Ncjdpfx Abju Nwhio Iol RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. *

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder Njdpfxehzhyno Ab Iocl .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, empty load weight: 365 kg, maximum load weight: 1,635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, Year of construction: 2024, Braked two-axle low loader with aluminum drop sides and steel railing on the side drop sides and on the front drop side, rear drop side can be folded down, lashing bracket on the side with 400 daN, 13-pole electrical system, plastic mudguards, support wheel plus vehicle registration document and freight to Gera € 100 net Nodjrk Iprepfx Ab Iscl Optional accessories at extra cost: equipment for 100 km/h approval, H-frame leaf grid, tarpaulin and bows, flat tarpaulin and much more. Exemplary pictures

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m Njdpfjwbixrex Ab Ijcl ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), FRONIUS VR 1550 CMT WIRE FEED Njdswblfzspfx Ab Iscl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. unused still in original packaging. Ncodpfjtkuvxsx Ab Isl

Condition: new, Fronius RCU 5000i compatible with Fronius TPS 2700 / 3200 / 4000 / 5000 / CMT Remote Control Unit (RCU) for Fronius welding machines: - Adjust welding parameters such as current, voltage, and wire feed speed conveniently from the work area without having to go directly to the welding machine - Intuitive display, easy to use Nodpfxowbiaco Ab Iscl - Upload characteristic curves AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE Viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping is no problem! ✔

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm Ncjdpfx Aofc R Dwob Isl -Weight: 17.5 kg