Folding machine

G. F. LOTTER -

Condition: used, 125kV incl. switch cabinet for small wind turbine Cj8Zjpak Pos 1 Switchboard switchgear F&G GA 2K 1TS YEAR 12/1997 Distribution board uesa 1250 NSL-2K/W-5 year 1998 Pos 2 Switchboard switchgear F&G GA 2K 1TS YEAR 12/1997 Distributor uesa 1250 NSL-2K/W-5 year 1998 Pos 3 Switchboard switchgear F&G GA 1TS 1A2 YEAR 12/1997 Distributor uesa 1250 NSL-2K/W-5 year 1998

Condition: used, G. Bee GmbH Turn actuator with limit switch box and 3-way ball valve, GTE 098 090 06 V17 F + MW14 40 02 + IP2M01 G 2D M12 B01 Model: GTE09809006V17F + MW144002 + IP2M01G2DM12B01 Turn actuator GTE-098/090-06-V17-F Technical data: Control pressure: max.10bar Temperature range: -50°C...+70°C Dnjxpx ||2 GD T5 T 100°C SIL2 6 springs Limit switch box IP2M01-G-2D-M12-B01 with Cherry-Mikroschalter Material: PA/PC/A2/TPE/IP67 2xmechanical SPDT, gold contact Voltage range: 250V AC/24V DC, 0.1A Temperature range: -25°C

Condition: used, Adapter, TIG hose package -Manufacturer: Fronius -Type: TT/MW (G/F) -WIG (W/Z) -gas-cooled 847WSG0060 -Dimensions: 320/125/H75 mm -Weight: 0.7 kg 8W3Htwdyg

Condition: used, feed pressure 4 bar volt 400 V Btqosftb ampere 0,6 A

Condition: ready for operation (used), Siemens F-DS1e-x 3RK1301-0AB13-0AA2 direct starter SN: G/116476 with 3RV1321-1DH10 contactor, used, good condition, 100% functional, scope of delivery as per photos Dppgiz

Overall weight: 14,000 kg, Empty load weight: 3,100 kg, Maximum load weight: 10,900 kg, Axe configuration: 2 axles, Loading space length: 3,400 mm, Loading space width: 1,630 mm, Loading space height: 813 mm, Suspension: air, Tire size: 285/70R19.5, Color: silver, Year of construction: 2021, Condition: new, Gearing type: other, Driver cabin: other, Equipment: Abs, Vehicle location: in feed / in transit, 2-axle, BPW axles, tandem, air suspension, lifting+lowering, ABS (anti-lock braking system), lashing eyes, front support, rear support, height-adjustable drawbar Body: for skip container Drum brakes, hot-dip galvanized, load securing, BPW axles type KMBMH 7008! 10.9 t payload, pre-fitting for attachable ramps for construction machinery transport. The loading area of our forward-running trailers can be extended on request and at extra cost! German production! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ebjjsfr

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: KEB, spur gear motor type G2.2A DK 80 G 4 F -Speed: 84 rpm -Power: 0.75 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 -Dimensions: 480/180/H175mm -Weight: 21.8 kg B2Whaafqo0

Condition: new, The following item is for sale: - Our offer number: 36/128 - Volute casing pump in close-coupled design - Manufacturer: KSB - Type: Sewabloc F 050-251 G H - Serial number: 9972527928 - Power : 400/690V 50 Hz 5,5 KW 10,5/6,1 A 2949 1/min Bg3Eze8Q2Gr - Dimensions: BXTXH 340x850x480 mm - Weight : 200 KG - with operating instructions - optical condition according to photos - New / as good as new - functional - The pump was in a warehouse as a reserve - The device comes from a factory closure for the production of cosmetics / household / medical products Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. Jwt9nu If an item is opened or repaired/rebuilt by the buyer, any warranty claim expires. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: new, Year of construction: 2024, Spindle speed (min.): 36,000 rpm, Spindle speed (max.): 12,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making but also for milling other materials - universal powerhouse with a rapid traverse speed of 80 m/min Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation Bnnc3Y70Doe Reference number: 1195 Availability from: July 2024 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: Simens Sinumerik 840 D SL with HT 2 manual terminal Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: pneumatic sliding door Year of construction: 2024 Condition: new

Overall weight: 35,000 kg, Empty load weight: 6,900 kg, Maximum load weight: 28,100 kg, Axe configuration: 3 axles, Loading space length: 11,000 mm, Loading space width: 2,420 mm, Loading space height: 2,000 mm, Loading space volume: 53 m³, Suspension: air, Color: silver, Tire size: 385 / 65 R 22,5, Year of construction: 2009, Condition: new, Gearing type: other, Total length: 2,550 mm, Total width: 3,900 mm, Driver cabin: other, Vehicle location: in feed / in transit, aluminum body, 3-axle, SAF axles, grain outlet, portal doors Body: Body approx. 53.2m³, ARCHIVE PHOTO! Drum brakes, The vehicle is still under construction and will be completed! Location: Hoym ( FAG ) ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Clhipocwkd

Condition: new, Year of construction: 2024, Spindle speed (min.): 12,000 rpm, Spindle speed (max.): 36,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/B Perfect for: Entry-level model for maximum milling precision - high feed rates and excellent milling results Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation Availability from: May 2024 CNC machine type: 5-axis CNC milling machine G-S-F/B (25-10) Spindle data: 8 kW / 6.4 Nm; 12000-36000 1/min; HSK E 40 (S1) Rapid traverse X/Y/Z: 80/80/30 Component dimensions X/Y/Z: 2500 x 1000 x 600 Control: Siemens Sinumerik ONE with HT 10 manual terminal Tool changer: 13 tools Tables: 2 tables, removable partition wall for single-table operation Vacuum system: 2x (per table) Coqz9Nel Tool breakage and length control: Renishaw-TS 27 R Other: Z-axis with KGT, pneumatic sliding door Year of construction: 2024 Condition: new

Overall weight: 35,000 kg, Empty load weight: 6,400 kg, Maximum load weight: 28,600 kg, Axe configuration: 3 axles, Loading space length: 10,500 mm, Loading space width: 2,440 mm, Loading space height: 2,000 mm, Loading space volume: 51 m³, Next inspection (TÜV): 06/2023, Suspension: air-lift, Color: grey, Tire size: 385/65R22,5, Condition: new, Gearing type: other, Total length: 2,500 mm, Total width: 3,650 mm, Driver cabin: other, Equipment: Abs, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Istr0Jm Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .

Condition: new, Year of construction: 2024, Spindle speed (min.): 36,000 rpm, Spindle speed (max.): 12,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/B Perfect for: Entry-level model for maximum milling precision - high feed rates and excellent milling results Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation Availability: March 2024 Model: 5-axis CNC milling machine G-S-F/B Bjwzckzp7Ee Spindle data: 8 kW / 6.4 Nm; 12000-36000 1/min; HSK E 40 Component dimensions: 2500 x 1600 x 600 Control: SIEMENS - Sinumerik 840 D SL; swivel control panel Tool changer: 13 tools Tool breakage and length control: Renishaw-TS 27 R Other: Removable partition wall, 2x 3-fold distributor strip

Condition: good (used), all stainless steel knife head: 6 Dptmbn knife speeds 40 – 5000 U/min reverse mixing gear 40 – 500 U/min separate bowl speeds 5 – 18 U/min emptier total power: 41,4 kW dimensions (w x d x h) : ± 2.400 x 1.365 x 1.780 mm yoc 2012

Condition: used, Stainless steel hoppers (original Arburg) for Arburg machines in various sizes with clamping piece and bar (not available for all) lightly used hoppers (almost as new) available in these sizes: Dpr9X7 hoppers capacity 50 liters (corresponds to Arburg part number: 103307) - 15 pieces hoppers capacity 100 Liter - 1 piece

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, Fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Vss3Qy Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), Year of construction: 2023, S&F Screening Machine | Oscillating Screen Type ASM-100 reconditioned (as good as new) Make: S&F GmbH Type: ASM-100 Year of manufacture: 2023 Condition: very good (like new) Screening capacity: approx. 5 - 10 m³/h (for cross-cut wood, wood chips and sawdust) Fractions: 3 Screen area: 1.0 m² per screen mesh size Screen decks: 2 pieces Mesh size of the screening: - 1st screen deck: punched perforated plate screen, D = 50 mm or as agreed. - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed. Drive power: 1.1 kW L x W x H: 2,300 x 1,250 x 1,050 mm Design: ECO Line Machine weight: approx. 600 kg Machine colour: RAL 6001 emerald green Screen inserts freely selectable Design of the material outlet according to customer requirements The screening machine has been inspected, painted and is in very good (as new) condition (see pictures). The oscillating screen has new bearings (flange bearing). Dpsnbr Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: good (used), grinding diameter max. 300 - 350 mm regulating wheel width 20 - 110 mm Cspah889Qe max. width of grinding wheel 110 mm turning speeds 1400 U/min total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,6 x 1,2 x 1,8 m

Year of construction: 1980, Condition: used, Volume: 25250 Liter Operating pressure: 3 bar Systemic volume: 25250 Liter Ckjzhuupnd Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012.

Condition: excellent (used), Catalog number 7426 TECHNICAL DATA Dpmcrr - max diameter of processed log 320mm - min length of processed log 2000mm - number of spindles 2pcs - circular saw blade diameter 500mm - smooth regulation of the feed speed on the inverter - power of the drive engine of the lower spindle 75kW - power of the drive engine of upper spindle 75kW - power of feed motor 2×2,2kW - power of motor of upper, input, pressing shafts 1.1kW - motor power of side shafts, bringing out, pulling 2×2.2kW top: - 2 pulling, gear shafts - saw shaft - from the side 2 output shafts, pulling, toothed - 2 outfeed shafts, sliding, smooth from below: - track - shaft with saws - caterpillar - total dimensions L/W/H 5900x2500x1900mm + control 1050x1300x2000mm - weight 3800kg Net price: 159900 PLN Net price: 36340 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations) Possibility to buy a feeder, which is listed on our other auction.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Dpc0Zf Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Year of construction: 2024, Condition: new, Functionality: fully functional, New 300 Ton/Hr Wheeled Eco Pug Mill Mixer. Complete with Twin Shaft 55KW Electric drive Pug Mill, 2 Powder Silos with fully intergraded measuring system for accurate and auditable dosing, 2 bin hopper 70/30 split with Live Head screen to reject over size, On board 200KVA Gen Set, On Board Compressor, Fifth Wheel coupler, Brakes, Lights (UK spec) Cmr9J3Hcso

Condition: refurbished (used), K+G Weather MWW130 The machine is in overhaul. The machine is completely overhauled. The machine has no feeding. Rated power:19 kW Total rated current:40 A Fuse protection (recommended) 3 x 50 A gL. Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm 8G9Apv7Xqd Speed mixing shaft:9.5/19 rpm Errors excepted and subject to prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: good (used), K+G Wetter 90L with ejector. Machine immediately available. The machine has been refurbished. For further questions we are at your disposal at any time. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. Bsswv7Ch A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.

Condition: refurbished (used), K+G Weather WW130 Bf2O7Bwsuaq The machine has been completely overhauled by us. The machine is on site. Errors and prior sale reserved. All information is non-binding. The accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.