Rotary Cutter

Gaemmerler RS 140

Condition: used, Machine type: Rotary Trimming Line Rotary Trimming Line Gammerler RS 114/530 consisting of 2 rotary trimmers RS 114/530 and 1 bump-turn Gammerler EM 120 with infeed jogger segmented knives Technical Data: Width untrimmed: min. 120 x 120 mm - max. 530 x 530 mm Width trimmed: 2-pages min. 117 x 117 mm max. 527 x 527 mm 1-page min. 110 mm Section width: min 0,5 mm – max 45 mm Cut Depth: 8 mm Max. flow rate: 80 m/min. Bcrjx0gm7f Cutting system: stream or single cut Product: sheet fed and offset printing Weight: approx. 670 kg /each Further Gammerler components on request. Ielhccqjui U Ixsmoat

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Iajlhcol Dn N Sscqmot Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Equipment: • infeed unit with degree bumbers • cutting unit Ijlhcced R Tgzoqmoat • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate Iajlhccsv N Ubceqmet -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Condition: as good as new (ex-display), Functionality: fully functional, rotational speed (max.): 180 rpm, filling weight (max.): 75,000 g, grinding spindle motor power: 4,000 W, TECHNICAL DETAILS Motor power: 4 kW Machine capacity: 120 l Load: max. 75 kg per load Speed range: 50 to 180 rpm Recommended setting: 115 to 135 rpm Container details Working bowl diameter: 640 mm Working bowl lining: PU, 26 mm, yellow Workpiece capacity per load: 55 l Iolhccswa Ul Ueqmjat MACHINE DETAILS Dimensions (L × W × H): 1,700 × 1,300 × 2,200 mm Weight: 700 kg Electrical and water connections Power connection: 3 × 400 V Fuse protection: 16 A CEE Water connection: G ¾ ISO 228-1 EQUIPMENT - Touchscreen with manual operation - Continuous speed adjustment via frequency converter - Stainless steel discharge box - Manually adjustable ball valve for compound addition - Color finish in RAL 7015/7035

Condition: new, sheet thickness steel (max.): 4 mm, roller diameter: 140 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor - Emergency stop - Documentation Ijlhccjpwgcujqmeat - 400V

Condition: excellent (used), Year of construction: 2015, mahr marsurf GD140 roughness tester computer controlled stroke 140 mm height maximum 400 mm clamping table 400 x 400 mm last calibration 2024 incl. computer with marwin software calibration block machine is connected for inspection Iaelhccsv Nqazsqmst

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. Islhccoupzmusqmoat The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: like new (used), Functionality: fully functional, UNUSED POWERKING HYDRAULIC ROCK SPLITTER MODEL : HRS140 Iaeljv Ux R Eohccqmot

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 200 kg Main Drive Number of axis 3 Workpiece Workpiece weight 90 kg This 3-axis MAHR MarSurf CD 140 CMM machine was manufactured in 2022. It features a contour probe system with a resolution of up to 6 nm and a traversing length from 0.1 mm to 140 mm. The machine supports a workpiece weight of up to 90 kg and offers adjustable measuring forces from 4 mN to 30 mN. If you are looking to get high-quality contour measuring capabilities, consider the MAHR MarSurf CD 140 machine we have for sale. Contact us for more information. Ijlhevfh Uzoccqmjat Application Types Measuring

Condition: new, Fastech 3-roll round bending machine FRS 2050 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1530 kg dimension L-W-H 3240 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement Ijlhohzq D Hsccqmjat self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, roller diameter: 140 mm, – Capacity 1270 x 4.5 m – Electrically adjustable rear roller – Digital display for rear roller movement Iaelhccqowbug Usmjt – Hardened rollers – Conical rollers – Pivoting top roller – Brake motor – Emergency stop – Documentation – 400 V

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Ielhccsrxb R Njqmjat Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, pivot bearings -Inside diameter: 140 mm -Outer diameter: 230 mm -Brite outer ring: 80 mm Iaolhcsb A H N Tscqmst -Width innering: 130 mm -Lubricating groove -Weight: 18 kg -Number: several available

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending Iasljh Timpohccqmet roll length 1250 mm roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: new, roller diameter: 140 mm, - Capacity 1050 x 6 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor Ijlhspwgdyeccqmsat - Emergency stop - Documentation - 400V

Condition: new, Fastech 3-roll round bending machine FRS 1550 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment Iajljhzq D Ashccqmet 2 x digital display sheet width 1550 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1420 kg dimension L-W-H 2320 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Cesurbend 3-roll round bending machine MRS 1550 x 140 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized rear roller adjustment digital display sheet width 1550 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 140 mm weight 1360 kg dimension L-W-H 2320 x 850 x 1200 mm Ijlhccehrdmmsqmsat motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized rear roller adjustment digital display sheet width 1250 mm Iaslhccqjhrdlhsmst sheet thickness5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm weight 1365 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: new, Fastech 3-roll round bending machine FRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 1250 mm sheet thickness 5,5 mm max. Iaslhccqehzq Dxjmst sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm smallest bending diameter 210mm weight 1365 kg dimension L-W-H 2020 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Year of construction: 1998, Condition: good (used), GAMMERLER-Compensating-Stacker, completely rebuilt, very good condition from 4 to 96 (128) pages Size: 500 mm x 330 mm Max. mechanical Speed: 80.000 sig./h Max. pile-height 300 mm respectively 400 mm Iajlhceb Hxpgocqmet

Condition: used, Year of construction: 2018, Used dust extractor Year of construction 2018 H 3 certified Cleaning with vibration with automatic start (potential-free contact) Suction nozzle diameter 140 mm (160 mm when removing the nozzle) Motor power 2.2 kW Filter area approx. 7 m² Nominal volume flow approx. 1100 m³/h at 140 mm Nominal volume flow approx. 1900 m³/h at 160 mm Max. volume flow 1900 m³/h Negative pressure approx. 2800 pa Collecting volume approx. 175 l max. Ioljwka U Ashccqmoat Sound pressure level 73 dB(A) Dimensions: LxWxH 1418 x 1012 x 1990 mm Weight approx. 350 kg PLC control with automatic start and text display LxWxH 1258 x 1012 x 1990 mm Availability: by arrangement Storage location: Baden-Württemberg

Condition: used, Year of construction: 2003, Technical details: internal diameter: * mm grinding depth: * mm centre height: 175 mm grinding length: 120 mm longitudinal and cross slide: 300 grinding wheel diameter: 10 mm grinding wheel speeds: 90.000 U/min Z-axis: 300 mm Incl. automatic feeding B-Axis * Ijlhccqoqh Rpysmjat

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. Islhov Sk Tmjccqmjat TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Year of construction: 2017, Condition: excellent (used), Functionality: fully functional, Vacuum lifting system 6.0 x 30.0 meters - including 3 vacuum units, 2 of which have a 90 degree tilt. Consisting of: 2 pcs. Vaculex vacuum lifter VL 140/20 WLL, each 40 kg lifting capacity. 1 pc. Alvac lifter with 40 kg. lifting capacity. All 3 pumps have wireless start/stop on handle. 140 mm lifting hose with red protective bag. Vacuum pumps in noise enclosure wall mounted. Equipment: 1 VL handle standard + 1 VL handle extended 500 mm. Suction boom with 2 suction cups on adjustable boom including foil knives. 90 degree pneumatic tilting system. 1 pc. tilts forward + 1 pc. tilts to the side. Feed hose 38 mm. Iaslhccqov S Driemet