Flexographic printing machine

Gallus EM 410

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Hedpfxoylypus Amgen Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Condition: good (used), Year of construction: 2005, UV Flexographic Printing Press Year of Manufacture: 2005 Servo-driven UV flexographic printing press Working Width: 330 mm / 13" Configuration and Equipment → Unwind → Web guiding system → Splice table → Corona treater → Web cleaner → Delamination / relamination unit with web turn bars → 6 flexographic printing units → 6 GEW UV dryers → Automatic register control → Chill rollers Hedpfx Ameyf Iausgjn → Rotary die-cutting station → Waste matrix rewind → BST web inspection camera → Product rewind

Condition: excellent (used), Year of construction: 2005, Gallus EM410-21S 10 colors Hedpfx Amoxw Uz Iogjn Year of manufacture: 2005 Complete rail system Unwinder for 1-meter roll diameter Splice detector Web break detectors Teknek cleaning system Corona treatment Antistatic system 6 printheads with IST UV curing units: 10 units in total Ink pumps: 3 Sensotec register control system Rotary die-cutting unit (K1B Gap Master) AVT inspection system Rewinder: compatible with both presses, selection required Cold foil unit (unwinder + rewinder): compatible with both presses Cold foil pressure cylinder: 3 Cold foil small cylinder: 3 Screen printhead Gen I: 2 available for both presses, selection required Screen printhead Gen II: 2 available for both presses, selection required Screen printhead Gen III: 2 available for both presses, selection required Mounting device: 2 available for both presses, selection required Additional ink chamber: 2 available for both presses, selection required Mounting device Additional ink chamber Tool list available on request

Condition: good (used), Year of construction: 2006, GALLUS EM 410 Year: 2006 10-color Hjdpfx Ajxzr Awjmgsn Cold foil etc.

Condition: good (used), Year of construction: 2004, functionality: fully functional, product width (max.): 500 mm, We are offering an EDALE flexographic printing machine with a total of 8 printing units and two die-cutting stations. Hodpfxoxhd A Ae Amgon

Condition: good (used), Year of construction: 2007, Web width: 410 mm Hodpfjxzrz Tjx Amgen 9-color Corona Die Cutting Coldfoil Unit etc. In Production

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Hjdpfxeyn Sb Us Amgjn Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: excellent (used), Year of construction: 2017, Gallus EM 430 S (6 colors) 1 rotary die-cutting unit - Automatic web tension control 0 – 400N (±5N) - Corona web treatment Hsdjww U R Sjpfx Amgen - Contact web cleaning - Longitudinal register control (all) - 1 mobile laminating station, unwind up to 800 mm diameter (10°–90° angle) - 1 variable position matrix removal up to 800 mm diameter - 2 winding and unwinding towers, variably usable up to 800 mm diameter - 2 web tension stations The machine - is supplied without accessories - is offered without camera optics

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: Hedpfxeylyhde Amgon 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: good (used), Year of construction: 2000, Laminator / Mounting machine Xerox Colorfix Seal Image 6000. A second roller is included. Hsdpfx Amjyzakfsgjn