Center Lathe

GEMA LZ 160

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 325 mm turning diameter over support: 150 mm turning length: 1000 mm turning length: plan: 165 / quer: 160 mm center height over bed: 200 mm length of gap: keine Kröpfung mm range of revolution per miute: 48 - 1.500 / 10 step U/min spindle bore of work spindle: 40 mm feeds:: längs: 0,021...2,34 / quer: 0,09...1,6 mm tailstock quill taper MT: 4 tailstock quill adjustment:: 125 mm total power requirement: 2,2 kW weight of the machine ca.: 1,0 t dimension machine xH: 2,1 x 0,7 x 1,2 m Threading possible: Metric, Withwort and modular thread Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws Djdpfx Aeu Ixydsdgsup - Multifix quick-change steel holder - Foot brake - Cooling water pump (exclusive feed) *

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min Dsdpfexp Rzbsx Adgsup feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dusdpfx Adjxpuf Rsgjp Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake Djdoymznhopfx Adgsup >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. Duodpfx Adsycrwfsgjp The machine is low-priced and only suitable for simple tasks.

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 51 mm, turning diameter: 410 mm, turning diameter over top slide: 268 mm, center height: 205 mm, turning length: 1,000 mm, total length: 1,820 mm, total width: 740 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 206 mm, Turning diameter in gap: 580 mm, type of input current: three-phase, overall weight: 880 kg, three-jaw chuck diameter: 200 mm, Centre distance ----- 1000 mm Duedpfxex Rkvkj Adgep Centre height ----- 205 mm Swing diameter ----- 410 mm Main spindle bore ----- 51 mm Bed width ----- 206 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 kW Weight ----- 880 kg INCLUDES * 3-axis digital readout by SINO * Quick-change tool post type Multifix TOOB2 with 4 tool holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Face plate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest * Foot brake (CE) * Electric brake (CE)

Condition: ready for operation (used), Year of construction: 2018, Immediately available from university: As-new L & Z lathe Knuth, Type Basic 180 Super, year 2018. Centre height 180 mm, swing over bed 360 mm, swing over cross slide 220 mm, turning length 1000 mm, spindle bore 38 mm, spindle speeds 45 – 1800 rpm, tailstock MK 4, 2-axis digital readout, chuck, tool holder, steady rest, tailstock, drive 3.5 kW, weight 1 t. Priced at €3,000 plus VAT ex location. Dusdpeyl Uc Nofx Adgop