Balkan Parket Ltd.

Condition: reconditioned (used), functionality: fully functional, Refurbished, automatic wide belt sander suitable for calibrating and sanding solid wood. The CB 1030 belongs to the higher range of automatic wide belt sanders, which stands out in particular for its very robust and rigid machine frame and perfect sanding quality. 2 units: roller + roller and foot with a shared 11 kW motor: 1st unit: calibration roller: hard rubber Fjdpfsxgq Najx Afpjgh 2nd unit: sanding foot: mechanically adjustable Sanding width: 1030 mm 2 feed belt speeds Motorized thickness adjustment + fine manual adjustment LCD display of working thickness Ammeter for checking motor load Automatic measurement of workpiece thickness Work table with lift on four screws Electronically controlled pneumatic oscillation 6 bar Extension of tables at the inlet and outlet Required extraction approx. 3500 m3 / hour Machine is fully reconditioned, adjusted, and tested.

Condition: excellent (used), functionality: fully functional, working width 1100 mm 2 rubber sanding rollers belt oscillation with photocells pneumatic belt tensioning electric table adjustment two carpet feed speeds Fgsdpfxsw Dq U Ho Afpeh star/delta start-up belt dimensions 2150x1130 mm installed power 12.5 kW

Condition: excellent (used), functionality: fully functional, working width: 1,100 mm, LEVIGALTECNICA wide belt sander: 1 unit rubber shaft Pressure skids Brush at the output Total power 16 kW Pneumatic oscillation Pneumatic belt tensioning Pneumatic clamp lock Maximum material height 180 mm Fgsdpfx Ajw Dq Ugefpsh Manual shaft height adjustment Two feed speeds Material thickness sensor Paper dimensions 1900x1130 mm Weight 1800 kg

Condition: ready for operation (used), functionality: fully functional, Wide Belt Sander SICAR 1000 R+R Specification: • Condition – used, after inspection and calibration • Manufacturer – SICAR • Model – 1000 R+R • Working width – 1000 mm • Max working height – 180 mm Fedpfjwzv Uysx Afpogh • 2 sanding units: - First calibrating roller, hard rubber – diameter 140 mm - Second finishing roller, soft rubber – diameter 200 mm • Main motor: 11 kW • 2 conveyor feed speeds • Electronic thickness gauge for workpiece • Oscillation with photocell sensors • Conveyor in very good condition • Extendable support rollers • Electric up/down adjustment • Original paint • Belt size – 2100x1000 mm • Weight – approx. 1,200 kg • Overall dimensions – 175 x 160 x 205 cm (L x W x H) Additional information: • Very good, original technical and visual condition • Photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: used, 1-roller calibrator with 1000 mm conveyor Fgodpfewx Ra Sox Afpoh

Condition: good (used), max. width of the processed element 1100mm max. height of the processed element 180mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration Fjdpfowm S S Ejx Afpsgh pneumatic belt oscillation electric lifting of the table top 2 types of feed speed main engine 15kW working pressure 6-8bar paper blowing

Condition: ready for operation (used), For sale is a powerful Danckaert wide belt sander. The machine is fully functional and ideal for professional use in woodworking. Table width (feed): 110 cm Condition: Used, with normal signs of wear Included: New sanding belts Fgodpjwftr Rsfx Afpjh Function: Technically in good condition Viewing is available by appointment. Please contact us with any questions!

Condition: excellent (used), CATALOG NUMBER 7612 Technical data: - max. width of the processed element 1030mm - max. height of the processed element 150mm - from above: - metal, pressure roller - metal, pressure roller, divided - aggregate (rubber roller, grooved for calibration + shoe + metal roller) - rubber, smooth, sliding roller - from below: - input roller - pulling tape - output, sliding roller - pneumatic belt oscillation on photocells - electric table lifting - 2 types of feed speeds - main engine 11kW - brake - knob for precise adjustment of the grinding height - feed motor 0.33kW Fgjdpfsv Ubmiox Afpsh - table top lifting motor 0.12kW - working pressure 8bar - diameter of the exhaust port 150mm - dimensions length/width/height 1500x1750x2000mm - weight 965kg ADVANTAGES - German production - unpainted - used grinder, very good condition Net price: PLN 28,900 Net price: EUR 6,800 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933 Fedorbyrpepfx Afpjgh

Condition: repair required (used), CGA PRESTIGE A 1100/22 wide belt sander Working width 1100mm Working height3-160mm Feed speed 4.5-9m/min Number of grinding units 2 1 metal grinding unit 2 rubber grinding units Oscillation of grinding aggregates Electrical adjustment of the grinding height CE certificate The machine is sold without technical preparation. The possibility of carrying out an inspection and service by prior arrangement of costs Fodpoqzxxzjfx Afpsgh

Year of construction: 1977, condition: ready for operation (used), Wide belt sander Bütfering see pictures Fedpfxendccts Afpogh Machine is immediately available Machine ran until a few days ago without problems in production but was very rarely used

Year of construction: 1993, condition: excellent (used), Working width 1100 mm Working height 4-160mm Belt dimensions 2620x1130 mm Fedoi A Afvjpfx Afpogh Feed speed 3.4-21.4 m/min The engine of the first aggregate 11 kW Second generator motor 15 kW 400V three-phase power supply Weight approx. 3100 kg

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height Fedpfsitvkuox Afpsgh SPECIAL PRICE! IMMEDIATELY AVAILABLE

Year of construction: 1988, condition: excellent (used), Working width 1080mm Electric lifting Digital reading of the working height Fedoih H Nhspfx Afpjgh 1 aggregate Combi generator Adjustable feed speed 11kw motor power Sanding belt dimensions 2100x1150mm Weight 1400 kg

Condition: used, Technical data: Working width: 1030 mm 1 Calibration aggregate Shaft diameter: 140 mm 2 Combination unit with pneumatic shoe Shaft diameter: 100 mm Height of the processed material: 160 mm Sanding belt dimensions: 2 feed belt speeds Fedpfxohqxwbs Afpjgh Extraction port diameter: 2x160 mm Electric lifting Digital display Safety switch Main engine power: 12 kW Voltage: 380V Producer: C.B. Overall dimensions: Length: 1450 mm Width: 1700 mm Height: 1850 mm