New England LLP

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Bwjdpjyq Dqgsfx Ah Iei Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 Bwjdpfx Aheyn Ntze Iei • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, BATTENFELD injection molding machine, model BK-T 1300/630, year 1996. Bsdoyn I T Hopfx Ah Iewi Clamping force approx.: 130 tons (≈1275 kN). The machine has a motor fault and is currently not operational. For sale for repair, refurbishment, or spare parts. Available for inspection at the facility in Albacete (Spain). Net price EXW Albacete. Negotiable.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,470 kN, Krauss Maffei KM 150-1000 C1 injection moulding machine from 2003, equipped with a WITTMANN W620 Cartesian robot for automatic part removal. Clamping force: 150 tons (≈1470 kN). Bsdjyn Im Hjpfx Ah Iowi This machine is suitable for producing medium-sized technical parts using standard thermoplastic materials such as PP, PE, or ABS. Fully industrial setup with automated system via WITTMANN robot. Available for inspection in Albacete (Spain). Additional technical information and operating video can be provided upon request.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Main specifications: Bodpfx Aeyn Ilvoh Ijwi Clamping force: 150 tons (≈1470 kN) Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 Bwedpsyn Acpsfx Ah Iei This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned, including the conveyor technology and a hot stamping unit, during our industrial auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Viewing by appointment is possible on Monday, 09.03.2026 from 10:00 to 11:00. Further details about the machine: Sumitomo including handling and conveyor belt - Year of manufacture: 2014

Condition: used, Year of construction: 2002, clamping force: 1,500 kN, This Demag Ergotech injection moulding machine 1500-440 from 2002, equipped with a Krauss Maffei robot and a CO2 marking laser, is being auctioned in our industrial auction "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Further machine details: Demag Ergotech system - Year of manufacture: 2002 - Weight: 7.5 t Bodjynz R Eopfx Ah Iewi

Condition: used, Year of construction: 2005, Demag System 200/500 This DEMAG injection moulding machine System 200/500-440 from 2005 will be auctioned in our industrial auction "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction takes place on our RESTLOS online platform. Further machine details: - Year of manufacture: 2005 - Weight: 7.7 t - Clamping force: 2000 - Tie bar distance: 500 - Injection unit: 440 - Control: C-Dias Bwedpfoynzx Nsx Ah Iei

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Bwodoynzukspfx Ah Iei Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130 t Bjdpfx Ahoynzrps Iewi Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen

Condition: good (used), Year of construction: 2004, clamping force: 1,250 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, Krauss Maffei 125-520 C2 General Information Model: 125-520 C2 Year of manufacture: 2004 Control system: MC4 Machine weight: 6,000 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping Unit Clamping force: 125 t Clamping system: 125 / … Platen size: 745 × 770 mm Tie bar spacing: 470 × 470 mm Opening stroke: 600 mm Max. platen distance: 900 mm Mold height: 300 mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit Injection unit: … / 520 Bwsdpfx Aeynhv Ijh Iji Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 275 ccm Shot weight: 250 g Specific injection pressure: 1,878 bar

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, clearance between the columns: 470 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 475 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Bjdpfx Aheynhuke Iowi Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2014, Engel - Injection moulding machine for silicone Insert 500V/100 Shuttle Year of manufacture: 2014 Bedpfxsynb Epe Ah Ijwi Clamping force: 100 tons

Condition: excellent (used), Year of construction: 2010, operating hours: 43,775 h, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 1,300 bar, injection weight: 231 g, mold height (min.): 300 mm, Engel Victory 500/120 TECH injection molding machine (253) Equipped with an inverter – the drive motor is electronically controlled. Thanks to the inverter: -The speed of the injection molding machine screw can be smoothly adjusted. -The machine uses less energy because the engine does not always run at full power. -Mechanical wear and noise are reduced. -Injection precision is improved, especially for complex details. Availability: in stock Year of production: 2010 Producer: Engel Screw diameter [mm]: 40 Injection weight [g]: 231 Injection pressure [bar]: 1300(2020) Closing force [kN]: 1200 Column spacing [mm]: without columns Plate size [mm]: 740×680 Min. mold height [mm]: 300 Control type: CC200 Tongue: English, German, Swedish Working hours [h]: 43775 Weight [kg]: 6800 Dimensions [mm]: 5000 x 1700 Robot socket: euro 67 Bodeym Unuepfx Ah Ijwi Core string: 1x Control of heating for molds: 8x Air valve: 1x Feed hopper: NO

Condition: excellent (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Bjdpfsym Az Njx Ah Ijwi Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Weight 12,000kg. PLEASE NOTE: Machine Must Be Off Site No Later Than 27th March 2026. Seller Can Assist With Decommissioning If Required.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 80,649 h, clamping force: 2,500 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details. • Injection volume: 441 cm³ • Specific injection pressure: 2268 bar • Tie bar spacing: 630 × 630 mm • Platen size (W × H): 970 × 1035 mm • Pressure cylinder length: 320 mm • Minimum installation height: 345 mm • Maximum installation height: 1195 mm • Maximum ejector stroke: 200 mm • Centering ring: 160 mm • Core pulls: 2 • Hydraulic/Pneumatic interface: H8 Bjdpfeymzawjx Ah Ijwi

Condition: excellent (used), Year of construction: 2008, Engel Victory 2050/300 Tech Bwsdpfx Aoymr Rgoh Iji Year of manufacture: 2008 Clamping force: 300 tons Controller: CC200 Screw diameter: 70 mm Operating hours: 65,300 h

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Bodeymqz Repfx Ah Ijwi terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Bjdpfx Asymqz Dsh Ijwi delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Bjdpsymqzqefx Ah Ijwi terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Bodpjymqzkjfx Ah Ijwi delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel Bjdpjymn Inofx Ah Iewi

Condition: used, Year of construction: 2016, operating hours: 29,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 530 mm, displacement volume: 412 cm³, injection pressure: 1,820 bar, injection weight: 375 g, mold height (min.): 200 mm, ejector force: 62,000 N, ejector stroke: 140 mm, opening stroke: 490 mm, installation height: 550 mm, total length: 6,000 mm, total width: 1,530 mm, overall weight: 7,100 kg, heating capacity: 18 kW (24.47 HP), pump power: 18,500 W, We are offering this used Haitian MARS II 2000-750eco injection moulding machine, year of manufacture 2016. Operating hours: 29,600 Equipment: Energy-saving servo-hydraulics 2 x hydraulic core pull 2 x air valve Euromap 67 interface for robots Newly installed, hardened screw and barrel unit with 50mm screw Controller: KEBA 1075 keypad control Bsdpeymcglsfx Ah Iowi If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), We are offering the following NETSTAL MPS injection moulding machines for sale: NETSTAL N115/60 MPS Year of manufacture 1987 Operating hours 149,000 h Bedpeyl Umbofx Ah Iowi NETSTAL N115/60 MPS Year of manufacture 1987 Operating hours 147,000 h NETSTAL N115/60 MPS Year of manufacture 1987 Operating hours 148,000 h NETSTAL N350/150 MPS Year of manufacture 1987 Operating hours 131,000 h Further information is available upon request.

Condition: ready for operation (used), We are selling the following NETSTAL Synergy injection moulding machines: Synergy 600-230 Year of manufacture 2016 9N.98107 Operating hours 60,240 h Synergy 800-230 Year of manufacture 2000 9N.01091 Operating hours 96,233 h Synergy 1500-460 Year of manufacture 2000 9N.01092 Operating hours 82,489 h Bodpsyl Twljfx Ah Iswi Further information, photos, and videos are available upon request.