Astone

Condition: used, functionality: fully functional, mileage: 23,651 km, number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: mechanical, color: white, first registration: 01/2022, chassis manufacturer: Ford, chassis model: Panamá 2.0, total length: 4,970 mm, total width: 1,980 mm, total height: 2,080 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 70 l, overall weight: 2,440 kg, operation weight: 3,100 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2022, machine/vehicle number: WF0YXXTTGYME51307, Equipment: ABS, additional headlights, air conditioning, airbag, all wheel drive, all-season tires, bunk beds, car registration, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, full service history, immobilizer system, middle seating arrangement, non-smoking vehicle, power assisted steering, second-hand vehicle warranty, single beds, traction control, truck registration, twin bed,

Condition: used, New: No Dimensions (L x W x H): 201 x 67 x 62 cm Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Iodpjyarr Rjfx Ahujht

Condition: used, functionality: fully functional, mileage: 151,032 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Ihodpfx Ahsyarr Dsujt Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: good (used), machine/vehicle number: VFKTX34CW12FX0620, axle configuration: 3 axles, first registration: 03/2001, suspension: air, tire condition: 50 %, color: other, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = Ihedpfx Ahsyarrwouot - air suspension - Disc brakes = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Axle 1: Double wheels Axle 2: Double wheels Axle 3: Double wheels Technical condition: good Visual appearance: good

Condition: used, mileage: 590,000 km, first registration: 10/2009, DESCRIPTION ON REQUEST Iodpfjyarrqjx Ahusht

Year of construction: 1976, condition: ready for operation (used), Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible. Ihjdpjyarrkofx Ahujt

Condition: ready for operation (used), A total of sixteen (16) stainless steel tanks Rieger, of which 4x with agitators, are available. 1) 5x stainless steel tanks, volume: 96000l, 2x of which with agitators. 2) 7x stainless steel vessels, volume: 49500l. 3) 4x stainless steel vessels, volume: 43300l. Individual sale possible, however a package sale is preferred, as some modifications to the building structure must be carried out during removal. An on site inspection is possible. Ijdpfx Aoyarrdehusht

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Ihedpfoyarq Tox Ahust

Year of construction: 2007, condition: ready for operation (used), A CNC large-format vertical turning lathe You Ji is available. Turning diameter: 1000mm, turning height: 600mm, table diameter: 630mm, max. workpiece weight: 1800kg, chuck diameter: 24inch, travel X/Z: 800mm/650mm, speed: 2400rpm, power: 25kW, tool positions: 6. Machine dimensions X/Y/Z: approx. 4000mm/2100mm/3350mm, weight: approx. 14000kg. The machine must be partially dismantled during disassembly, as it would otherwise not fit through the gate. Documentation vorhanden. An on-site inspection is possible. Ihedpsyarq Hefx Ahuot

Year of construction: 2008, condition: ready for operation (used), Swing diameter: 750mm, turning diameter: 550mm, max. turning height: 500mm, max. workpiece weight: 1200kg, speed: 2000rpm, spindle power: 16.4kW, chuck diameter: 533mm, tool stations: 10, weight: approx. 10600kg. Documentation available. An on-site inspection is possible. Ihsdpfxsyarqys Ahuet

Condition: ready for operation (used), Year of construction: 2002, A rotary table skin packaging machine Zappe is available. Packaging format X/Y: 400mm/500mm. An on-site inspection is possible. Ihsdpfx Ahsyarqtoust

Year of construction: 1999, condition: ready for operation (used), A Multivac thermoforming machine is available. Film width: 562mm, max. forming depth: 200mm, overall system dimensions X/Y/Z: approx. 14000mm/1400mm/2000mm, weight: approx. 4500kg. An on-site inspection is possible. Ihedpfx Aheyarqmeuot

Condition: ready for operation (used), A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible. Ihsdsyarqgjpfx Ahuet

Condition: ready for operation (used), Year of construction: 2021, An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible. Ihodpjyarqaefx Ahujt

Condition: ready for operation (used), A total of six steel rotor tanks are available as collection tanks for the separation process of juice and berries. An on-site inspection is possible. Ihodpeyarp Nefx Ahuet

Year of construction: 1960, condition: ready for operation (used), Throughput capacity: 9000l/h, heat recovery: 80%, operating temperature range: 5°C-71°C, max. operating pressure: 5bar, volume: 1/2: 97l/96l. On-site inspection is possible. Iedpfx Ahsyarp Aeueht

Condition: used, mileage: 530,000 km, first registration: 02/2011, DESCRIPTION ON REQUEST Ihjdpfx Ahoyarppjust

Condition: used, mileage: 458,000 km, first registration: 01/2008, DESCRIPTION ON REQUEST Iodpfxeyarn Se Ahuoht

Condition: used, Year of construction: 2010, Hydraulic injection moulding machine Kraus Maffei KM 350-3000CX in good condition. Ijdpjyarn Ejfx Ahujht Ca 79000 working hours. Availability: 04/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 350T Screw diameter: 70 mm Tie bar spacing (H): 710 mm Tie bar spacing (V): 710 mm Pressure on material: 1855 bar Shot weight: 1464 g Platen length: 1060 mm Platen width: 1095 mm Opening of the press: 920 mm Machine weight: 15500 kg Machine dimensions (LxWxH): 6790 x 2000 x 2250 mm

Condition: new, Used screw compressor. Everything in working condition. Condition: New Ihodpfxjyarnxe Ahust

Condition: excellent (used), mileage: 728,275 km, power: 309 kW (420.12 HP), first registration: 07/2017, fuel type: diesel, tire size: 315/70-R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, soot filter, = Additional options and accessories = - Aluminum fuel tank - Front work lights - Heated mirrors - Leaf suspension - Power brake booster - High beam headlights - Low-noise operation - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Particulate filter - Radio/CD player - Sleeper cab - Stability control - Auxiliary heater - Automatic pre-heating system - Toolbox - Power take-off (PTO) = Remarks = Ihedpfx Aheyarnroust Well-maintained MAN TGX 18.420 4x2, year of manufacture 2017, with 754,083 km, automatic transmission, Euro 6 standard, auxiliary drive, air conditioning, refrigerator, 1 bed, ADR (FL, AT) valid until 20.01.2016, tires 315/70-R22.5 (L: 10, 12/10mm; R: 10, 10/9mm), chassis number: WMA06XZZ7JP096908, MAN BrakeMatic = Additional information = General information Usable materials: Chemicals Technical details Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Tire size: 315/70-R22.5 Brakes: Disc brakes Front axle: Alloy wheels; Max. axle load: 7,500 kg; Steering; Left tire tread: 60%; Right tire tread: 60%; Suspension: Leaf spring Rear axle: Twin tires; Alloy wheels; Max. axle load: 11,500 kg; Left inner tire tread: 60%; Left outer tire tread: 75%; Right inner tire tread: 55%; Right outer tire tread: 60%; Suspension: Air suspension Weights Curb weight: 7,327 kg Payload: 10,673 kg Gross vehicle weight: 18,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more details.

Condition: excellent (used), machine/vehicle number: WDB62100615220844, mileage: 751,866 km, power: 162 kW (220.26 HP), first registration: 02/1986, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 2,900 mm, Year of construction: 1986, Equipment: ABS, differential lock, = Additional options and accessories = Isdjyarnljpfx Ahujht - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: used, mileage: 613,000 km, first registration: 11/2011, DESCRIPTION ON REQUEST Iedpfxjyarnfo Ahueht

Condition: used, Two roller tracks from Paul suitable for underbench cabinet saw AO or similar machines. Roll width: 56 cm Ihsdpfjyarm Uex Ahuot Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm

Condition: like new (used), functionality: fully functional, Very nice Polar Jogger type RAB2 for sale. Size 720 x 870 mm. With air removal rollers and safety bars – this machine is in working condition. You are of course welcome to test the machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands). Regards, Henk Hoos. Ijdpfjyarm Ijx Ahuoht