Mecaniza2

Condition: good (used), Year of construction: 2021, The machine is in good technical condition, testing is possible by prior arrangement. Dsdpfxsxlu Dlj Acwjcn

Condition: good (used), Year of construction: 2012, The machine is in good technical condition, after prior agreement it is possible to test it. Multifunctional machine, which has a 5-axis table and a 3-axis table available. Documentation to support. Max. travel in the X axis - 1,520 mm • Max. travel in the Y axis - 520 mm • Max. travel in the Z axis - 420 mm • Max. table width - 920x540mm • Max. diameter of the 2nd table - 650 mm • Max. workpiece weight - 800 kg • 5-axis Dcedpfx Acjxluy Tswon

Condition: used, Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: Heidenhain iTCN 530, workpiece weight (max.): 1,000 kg, table width: 620 mm, table length: 1,350 mm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, tool length: 220 mm, tool diameter: 150 mm, tool weight: 7 g, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Dcedsxlrnbjpfx Acwon Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: like new (used), Year of construction: 2022, operating hours: 3,814 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: Haas, controller model: NGC, table width: 457 mm, table length: 1,321 mm, table load: 1,588 kg, distance table center to spindle nose: 742 mm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Haas VF-4 with a 10k spindle, used in a production palletized setup of smaller parts in light materials, primarily aluminum, brass and plastics. Low hours, accident free. BT 40 Taper Tool changer type: Carousel Air required: 113 L/min at 6,9 bar Machine weight: 5316,0 kg Through-spindle coolant ready Programmable coolant spindle Dcsdpexlky Nefx Acwon Chip auger

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 13378, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, spindle speed (max.): 7,500 rpm, Working machine. Being Used every Day Dcsdpfx Aexlikaecwsn

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle coolant: 30 bar - Extraction unit - Renishaw tool measurement prepared - Magazine with 50 slots Original purchase price in 2004: EUR 230,000.00 Defects: - Motor spindle electrical fault (probably winding burnt out) - Control supply unit UV 101B (repair cost approx. EUR 600.00) Dsdpfjxlg Ucjx Acwecn Net price without dismantling and unloaded, ex location Luckenwalde (Germany), without transport

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 8,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, table width: 610 mm, table length: 1,850 mm, table load: 1,000 kg, 3-axis CNC machine (VMC) STYLE - BT 1500 MACH-ID 9263 Make: STYLE Type: BT 1500 Year: 2005 Closed housing Chip conveyor Under power X - Travel: 1500mm Dedpfx Ajxlgqkocwjcn Y - Travel: 650mm Z - Travel: 650mm Table Length: 1850mm Table Width: 610mm Table load: 1000 Feed rate X-Axis: 8000mm/min. Feed rate Y-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 14kW Speeds / ranges: 6000Rpm ATC / revolver: 24 Number of controlled axis:3 Coolantsystem: Yes Length: 3100mm Width: 2300mm Height: 2500mm Weight: 5300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load: 2 t Travel X/Y/Z: 1530 / 660 / 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Internal coolant supply (IKZ) Feed rates: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1260 mm/min Total power: 52.5 kVA Chip conveyor Weight: 16 t Dodpfexlfa Dox Acwocn Price: EUR 7,000.00 plus VAT, ex location.

Condition: used, Year of construction: 1999, x-travel 1600 mm y-travel 400 mm z-travel 350 mm Dsdpjxlacasfx Acwscn Control Siemens 840D

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm Dcjdpfx Acjxk U R Nowjn z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: ready for operation (used), Year of construction: 1997, Make: MAZAK Type of machine: VTC-20C Year of manufacture: 1997 Control system: Mazatrol M-Plus Machine's weight: 7.320 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 7.000 U/min Dcsdpfx Aoxk Uxtscwen max. Table load: ca. 1.000 kg Overall dimensions: 4.900 × 3.000 × 2.700 mm Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: ready for operation (used), OKUMA MB-46 VA – Vertical Machining Center For sale is a vertical machining center from the manufacturer OKUMA, model MB-46 VA, year of manufacture 2001. The machine is in excellent condition, immediately available, and ready for operation. — Technical Data • Table size: 1,530 × 660 mm • Travel range X/Y/Z: 1,500 × 660 × 660 mm • Main spindle speed: 8,000–25,000 rpm • Number of tools: 20–96 • Motor power: 11–30 kW — Equipment • Extensive accessories and tooling included — The machine is immediately ready for use. • Inspection possible at any time • Europe-wide shipping available — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors. Dsdpfx Aoxk T Aqscwscn

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 24, WORK AREA: Longitudinal X: 1.270 mm Transverse Y: 508 mm Vertical Z: 635 mm Distance between spindle nose and table: 102-737 mm TABLE: Dimensions: 1.321 x 457 mm Maximum weight on table: 1.588 kg T-slot width: 16 mm T-slot center distance: 80 mm SPINDLE: Spindle connection taper: BT 40 Rotation speed: 12.000 rpm Dcodpfx Acjxiv T Aswjn TOOL CHANGE: Magazine capacity: 24 Tool taper: BT 40 Machine complete with: • High pressure through the spindle • Remote electronic handwheel

Condition: ready for operation (used), Year of construction: 2007, Haas VF-4SS HE Milling Machine with HRT310 Year of manufacture: 2007 X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1,321 x 457 mm Maximum table load: 794 kg Spindle taper: ISO SK 40 Spindle: 12,000 rpm with 22.4 kW Through-spindle coolant (IKZ): 21 bar Programmable coolant nozzle Additional filter Chip conveyor spiral 24+1 tool changer High-speed machining Portable control panel VQC-V programming support G/M codes RS-232 and USB interfaces Coordinate system / scaling User-defined macros 4th axis preparation HRT 310 CNCB HTS9 manual tailstock Machine weight approx. 6.3 t Dcodpfx Aoxit Nujcwen The machine can be inspected under power by arrangement near Bielefeld. Loading can be provided. Buyer is responsible for transport. Technical data, accessories, and machine descriptions are non-binding.

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Machine weight 13500 kg Dcedpfx Acexirgxowen Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1987, General Data Machine weight 9000 kg Main Drive Djdpfsxirgljx Acwocn Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 560 mm Z-Axis Movement 630 mm Table Table load 2500 kg This 4-axis HELLER PFU2 was manufactured in 1987. A vertical machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking to enhance their machining operations with a reliable, used machine. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 9000kg Control Unit Brand SELCA Model S4045PD Main Drive Spindle speed range 20000 RPM Dcsdpexirfhofx Acwjn Movement X-Axis Movement 1450 Y-Axis Movement 520 Z-Axis Movement 520 This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 4,270 h, functionality: fully functional, For sale is a CNC machining center, model HAAS VF-8/50, equipped with a 4th axis: rotary table (as new), type HAAS SHRT 310B. Lightly used – only 2,452 spindle hours! High torque thanks to a 2-speed gearbox and SK 50 spindle. ——— ✅ Technical specifications: • Model: Haas VF-8/50 • Travel (X / Y / Z): 1,626 mm / 1,016 mm / 762 mm • Clamping table: 1,676 mm × 953 mm • Table load capacity: max. 1,814 kg • Spindle taper: SK 50 • Spindle speed: up to 7,500 rpm Dedpoxhflrofx Acwjcn • Spindle drive: 30 HP (22.4 kW) • Tool changer: 30 stations • Rapid traverse: 12.7 m/min • Machine weight: approx. 9,500 kg • Installation dimensions: approx. 3,800 × 3,000 mm (L × W) ——— ⚙️ Equipment: • Through-spindle coolant (TSC) • Fine filter • Chip conveyor • Programmable coolant nozzles • With 4th axis: rotary table (as new), type HAAS SHRT 310B ——— General information: • Year of manufacture: 2007 • Operating hours: 2,452 • Condition: in good working order / ready for immediate use • Location: 25715 Eddelak, Germany • Availability: immediately ——— Free loading onto truck provided. Can be demonstrated and tested under power.

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Vertical Machining Center AWEA BM-1600 Year of manufacture: 2008 Control: FANUC Series 18i-MB Travel: X: 1600 mm Y: 800 mm Z: 700 mm Table dimensions: 1700 x 800 mm Max. load capacity: 1600 kg Tool holder: SK 40 Tool changer: 32-station Max. spindle speed: 12,000 rpm Internal cooling: Yes Electric handwheel: Yes Chip conveyor: Yes L/W/H: 4600 x 3300 x 3500 mm Weight: 16,000 kg Dsdpfx Acexhcy Hewocn On-time hours: 29,541 h Spindle hours: 8,299 h

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Vertical Machining Center AWEA BM-1400 Year of manufacture: 2008 Control: FANUC Series 18i-MB Travel: X: 1400 mm Y: 800 mm Z: 700 mm Table dimensions: 1500 x 800 mm Max. load capacity: 1400 kg Tool holder: SK 40 Tool changer: 32-station Max. spindle speed: 12,000 rpm Internal cooling: Yes Electric handwheel: Yes Chip conveyor: Yes Dcjdpfsxhcx Nex Acwsn L/W/H: 4000 x 3000 x 2900 mm Weight: 12,000 kg On-time hours: 39,954 h Spindle hours: 14,409 h

Condition: ready for operation (used), Year of construction: 2016, Movement X-Axis Movement 1270 Y-Axis Movement 660 Z-Axis Movement 610 Dcsdpfx Asxgv Uzscwsn This 3-axis Hurco VMX50i was manufactured in 2016. It features a robust table size of 59 × 26 inches and can handle a maximum weight of 4,410 lbs. Equipped with a high-speed spindle capable of 12,000 rpm and a 40-tool changer, this machine is ideal for complex milling tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VMX50i machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: new, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, overall weight: 7,300 kg, Feeler VMX-1300 Vertical Machining Center CNC Fanuc 0i-MF Plus - Travels: X 1,300 mm | Y 610 mm | Z 600 mm - Table: 1,420 × 600 mm | Max load 1,500 kg - Spindle: BTT 40, 12,000 rpm, power 15 – 18.5 kW - Feed rates: 1–15 m/min | Rapid traverse: 36/36/24 m/min Dcodpfx Ajxgpt Rjcwjn - ATC: 30 tools, swing arm - Weight: 7,300 kg | Dimensions: 3,550 × 3,325 × 3,150 mm - CNC Control Fanuc 0i-MF Plus with Manual Guide I ✅ Ideal for machining medium/large workpieces, moulds, dies, and components for automotive, aerospace, and heavy machinery. ✅ Includes 30 bar internal cooling system, chip conveyor, automatic lubrication, and full CE protection.

Condition: used, Year of construction: 2016, 5-Axis Working Area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed / Rapid Traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis Acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² Dcjdpoxgn Slefx Acwjn -> Jerk 150 m/s³ Table Load Capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool Magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s Machine/Asset does not include any product-related tool, fixture or gripper (robot).

Condition: used, Year of construction: 2014, Equipment: chip conveyor, Vertical Machining Center FEELER VB1400 A. Year of manufacture: 2014. X: 1400 mm Dsdexgd Suopfx Acwecn Y: 800 mm Z: 145-845 mm Spindle SK 40 Control Fanuc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 610 mm Travel Z-axis: 660 mm Dedpoxf Hmlefx Acwocn Rapid traverse Y-axis: 610 m/min Rapid traverse Z-axis: 660 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control: Ultimax 4 Weight: 9,500 kg EQUIPMENT Chip conveyor