Μηχανουργειο Μπατακασ Παν. Σαββασ

Condition: repair required (used), Year of construction: 2018, functionality: limited functionality, machine/vehicle number: L5370, travel distance X-axis: 175 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 135 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 125,000 rpm, spindle speed (min.): 10,500 rpm, total height: 2,160 mm, total width: 1,815 mm, total length: 2,339 mm, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 400 V, input current: 32 A, Equipment: documentation/manual, The ultra-precision milling machine, hereinafter referred to as the machine, is designed and built for the machining of intraocular lenses within the specified physical limits. Nljdpfx Asy Uuxqjkueb Defective door safety switch. Some buttons are missing.

Condition: used, Year of construction: 2011, Vertical milling machine TOS Olomouc Year of manufacture 2011 Lightly used With pneumatic tool changer Nodpfxey Uuxde Akuslb With digital display

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ZMS 100-010, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 135 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 75,000 rpm, total height: 2,040 mm, total width: 770 mm, total length: 1,100 mm, table width: 300 mm, table length: 300 mm, table height: 1,360 mm, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, input current: 16 A, Equipment: documentation/manual, The “micro one” is a professional micro-machining center that can be adapted to a wide range of requirements with exceptional flexibility. It is characterized not only by its extremely compact design and high-quality construction but also by its interchangeable modules. Modularity in the smallest of spaces. A maximum of 0.9 square meters of valuable floor space is all you need to invest in a fully functional 3-axis machining center. Plug & Play not only describes the product technology used but also applies to transport: the micro one easily fits through any standard door. Njdpfx Aksy Urgfoujlb The machine was only used for processing acrylate.

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed length X-axis: 940 mm, feed length Y-axis: 520 mm, feed length Z-axis: 600 mm, rapid traverse X-axis: 25 m/min, CNC Vertical Machining Center AXA VCC You are welcome to inspect the machine in our factory while it is running. If you are interested, we will send you demonstration videos of the machine. Nljdpfx Aoy Ufrhskueb The AXA VCC is a robust CNC vertical machining center from the German manufacturer AXA Entwicklungs- und Maschinenbau GmbH, based in Schöppingen. The machine is ideally suited for the precise and efficient machining of demanding workpieces in mechanical engineering, mold making, and general metalworking. The machine is equipped with a Siemens Sinumerik control system, which provides reliable operation, efficient programming, and high process reliability. Overall, it is a solid and versatile vertical machining center from a renowned German manufacturer that guarantees high precision, performance, and reliability in industrial production. PS CNC Service Germany GmbH & Co. KG Espelkamp You are in the best hands with us – professional, reliable, and with a passion for machines! All information is provided without warranty.

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nsdjy Ty Nrspfx Akuelb Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 Nodpfx Ajy Ty Nfjkuelb In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Nlodpfey Ty I Uox Akuob Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, x-travel 560 mm y-travel 500 mm Nledpfx Akey Ty Iusuob z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Nsdpfx Aoy Ty Inekuslb as prior sale!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Nljdpfxsy S Shwj Akuob Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, Milling machine Type: MEC 300 Year: 2002 Serial number: M0004/02 Control: Selca s3045 Nodpfx Akey Sp Nrsuslb

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Nljdpfx Ajy R U Azjkujb Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: used, Year of construction: 2017, operating hours: 2,115 h, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, rapid traverse X-axis: 8,500 m/min, rapid traverse Y-axis: 8,500 m/min, rapid traverse Z-axis: 7,000 m/min, overall weight: 2,708 kg, We offer this used TOS OLOMOUC FNG-40 CNC A milling machine, manufactured in 2017. Type: FNG-40 CNC A Serial number: 404 100 008 Nledpfxsy Rbb Rj Akujb Year of manufacture: 2017 Weight: 2708 kg If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 500 mm, table length: 700 mm, rotational speed (max.): 9,000 rpm, rotational speed (min.): 20 rpm, table load: 200 kg, overall weight: 3,500 kg, workpiece weight (max.): 6 kg, space requirement width: 2,300 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, For sale: Deckel MAHO DMU 50 T. Year of manufacture: 2001. The machine is equipped with the popular and powerful Heidenhain MillPlus / 3D path control, workshop-serviced and immediately ready for operation. 3-axis base machine with manual swivel rotary table [3+2 axes]. Available from calendar week 21. Can be inspected under power at the location near Salzburg, Austria, immediately. Nodpoy Raf Uofx Akujlb Condition: Very good (low operating hours for its age) Incl. accessories. Machine weight: 3,500 kg

Condition: excellent (used), functionality: fully functional, Milling machine Saimp model FU-P2. Machine complete with axis display and dividing head. Used. Nljdsy N T Umjpfx Akueb

Condition: good (used), Year of construction: 2003, CNC milling machine RECKERMANN 1300 Kombi, No. 8112, year of manufacture 2003, spindle speed 32 - 1,400 rpm, 20-position tool changer (SK40), HEIDENHAIN control Nledpsy N Tp Rsfx Akuob

Condition: used, Year of construction: 1985, functionality: limited functionality, machine/vehicle number: WW 12 24 2292, travel distance X-axis: 160 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 20,000 rpm, rotational speed (max.): 20,000 rpm, For sale is a classic precision milling machine from Kern Microtechnik, specialized in micro-machining and fine mechanics. This machine stands out for its compact design and the exceptionally high inherent accuracy characteristic of Kern machines. Technical Data & Features Model: Kern 10/16 (Type WW 12) Control: Heidenhain TNC 135 Travel Paths: X-axis: 160 mm Y-axis: 100 mm Nlodpfjy Nbcrjx Akusb Z-axis: 200 mm 4th / 5th axis included Spindle: High-frequency spindle (HF) for speeds up to approx. 30,000 – 40,000 rpm Year of manufacture: approx. 1984–1986 (serial number 229) Condition & Particularities Visual condition: The machine is in a well-maintained state considering its age, with normal signs of wear to the paintwork. Important note: The automatic tool changer is currently defective. However, the machine can still be loaded manually or repaired by skilled technicians or hobbyists. Fields of application: Perfectly suited for the watchmaking industry, jewelry manufacturing, electronics, or demanding model making.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102194, milling spindle speed (min.): 50 rpm, milling spindle speed (max.): 3,500 rpm, Equipment: lighting, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Nodpfx Aoy H Ix Uokujlb Spindle guard Coolant system

Condition: good (used), Vertical Drilling and Milling Machine Stock number: 3083 Manufacturer: Sempuco Greiz Year of manufacture: 1956 Type / Model: Midrimat 3 Machine number: 3545 Nledpfjy Hflrjx Akueb Travel (x-y-z): 320 - 150 - 350 mm Spindle taper: MT3 Spindle feed: 0.042 mm/rev Quill stroke: 60 mm Table size: 660 x 310 mm Clamping surface of the table: 450 x 200 mm Head travel: 150 mm Speed range: 190 to 2,100 rpm Feed rate: 11.2 to 125 mm/min Spindle taper: MT3 Connection: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.65 t Footprint: 800 x 600 mm Dimensions: 900 x 1,100 x 1,700 mm

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec Nledpey E Tv Aefx Akueb rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, Njdpfxoy A H Tpo Akuslb extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: good (used), x-travel 380 mm z-travel 140 mm Nsdpfx Akeyz Dg Deuslb dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Nljdpoyzxz Nsfx Akuob Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: SI 9141, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 31 rpm, quill travel distance: 120 mm, total height: 2,000 mm, total width: 1,800 mm, total length: 1,750 mm, table width: 300 mm, table length: 1,100 mm, The milling machine is fully functional. Accessories are included in the price. No warranty is provided for the machine. Nlsdeyzpy Aepfx Akujb

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7HAA047, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, spindle speed (min.): 140 rpm, quill diameter: 65 mm, rapid traverse X-axis: 4,200 m/min, rapid traverse Y-axis: 4,200 m/min, rapid traverse Z-axis: 4,200 m/min, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, overall weight: 6,500 kg, workpiece weight (max.): 550 kg, MITSUBIISHI M-V4050 Vertical Machining Centre, new 2005, ex aerospace enviroment. Fanuc 16iMB control, with hand controller, 30 position auto tool changer, BT 40 spindle, 14,000 rpm, renishaw probe, thru spindle high pressure coolant, chip conveyor. XYZ axis travels 800 x 510 x 460 mm, table size 1000 x 550 mm. Machine is in excellent condition. Vice and tooling not available. Nlodpfxjyr Nh Hs Akueb