BORAMTEC Bohr & Rammtechnik Berlin GmbH

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. Ijdpfx Adoxw Rpuj Doii 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 217,482 km, axle configuration: 4x4, Year of construction: 2006, Equipment: all wheel drive, Empty weight: 16.000 kg Isdpfx Asxvrfbsd Deii Carrying capacity: 7.800 kg GVW: 23.800 kg Auction item. The truck with drilling equipment is in working condition. Truck MAN 17.222. The maximum drilling diameter is 315 mm. Separate engine for drilling equipment. New suspension, tires. All books and specifications are available.

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Iisdpfx Aexu A N Usd Dji Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Ijdpfx Adexr Tx Us Dsii Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Iijdpfsxr Txzjx Ad Dsi Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Ijdpjxr Txnjfx Ad Deii Own weight: 16600 Engine hours: 13265 Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: excellent (used), functionality: fully functional, mileage: 100 km, Year of construction: 2021, Flushing/mixing unit sporadically used. Compatible with Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a fluid management and drilling fluid mixing system, used for pipe ramming and horizontal directional drilling (HDD) applications. Year of manufacture: 2021. Mud tank/drilling fluid tank capacity: 200 gallons (approx. 757 L) Maximum fluid flow to drilling unit: 18 gpm (approx. 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Standard dimensions: - Length: 1.85 m / with hose and valve: 2.13 m - Width: 0.813 m - Height: 1.36 m Iodjxrppcjpfx Ad Dsii Dry weight: approx. 182 kg Weight with filled tank (full with water): approx. 939 kg The unit features a narrow tank, allowing it to be positioned alongside a drill rig on a trailer – facilitating easy transport to the jobsite. It is equipped with a venturi wet hopper for effective mixing of additives with the fluid, expediting mixing cycles. The design is relatively straightforward, with several configuration options to adapt the equipment to various field setups. The FT5 series is part of the Ditch Witch fluid management systems line. The listed price is net and applies to export and companies. Significant discount possible for private customers. We invite you to contact us directly by phone to get your best price!

Condition: used, functionality: fully functional, power: 257.42 kW (349.99 HP), overall weight: 22,500 kg, Year of construction: 2009, machine/vehicle number: 08-12-987, Conrad Boxer 300 Combi – Flushing and Suction Drilling Rig Specifications Brand/Type: Conrad Boxer 300 Combi (Combi 300HD) Serial No.: 08-12-987 Year: 2009 Weight: 22,500 kg Power: 280 kW Engine: Volvo, installed in 2024 TYPE TD 121 G - 350 PK Iiedpfjxrd Rhex Ad Dei Drill pipes: approx. 42 pcs, length 5 m, Ø 90/80 mm Flushing and suction drilling system

Condition: like new (used), power: 242 kW (329.03 HP), fuel type: diesel, overall weight: 24,300 kg, Equipment: Rearview camera / GPS compass Total drilling depth: 252,155 m Borehole navigation system: HNS without base station Hydraulic drifter COP 3060 CR / COPROD 76 (90-105 mm): Impact power: 30 kW / Impact frequency: 50 Hz / Torque: max. 2,450 Nm. Atlas Copco compressor C146-07: Delivery rate: 233 l/s (13.4 m³/min) Pressure: 12.0 bar Iodpfexqpv Hox Ad Doii Water mist system: with 400 L tank Stabilization: Rear hydraulic cylinders Hammer hours: 2,641 h Dust extraction unit DCT: Hydraulically driven Drill feed: Aluminum with chain feed and double hose reel Progressive RCS drilling system including collaring automation: Anti-jamming automation, automatic flushing air monitoring Engine CAT C9.3 Tier 4 final: 242 kW Feed: Automatic positioning / Automatic addition and retrieval of drill rods Rod changer magazine RHS: Automatic, 8 rods, each 4.5 m

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21280 Specifications: 2005 model 16,457 engine hours 9,610 drilling hours Weight: 8,500 kg KW: 88 Steel tracks Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS Iiedpfxoxbbcgj Ad Dei

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Iijdpfx Adow Ucm Ue Dei Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Iedpfx Ajw Rag Ded Doii Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: Iisdpfx Ajwvzrmjd Dsi 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 8,000 kg, Year of construction: 2022, operating hours: 2,800 h, Hello, I have a Beretta GT52 vertical drilling rig for sale, year of manufacture 2022, operating hours 2500. The rig is equipped with: - CAT engine with a power of 136 HP with the latest Stage V emission standards - Bellin 1200L screw mud pump (capacity 500 l / min and 12 bar discharge pressure) - Hydraulically lifted rod magazine - Winch with a pulling force of 2000 kg - Floating head with vibration damper, used with a DTH hammer (possibility of drilling with both a hammer and a rotary mud) - Hammer lubricator + air line - Magnetic system for feeding the rod / pipe set. - Triple jaws (can be used to drill with casing pipes) Dimensions (folded): width 190cm, height 249cm, length 580cm. Iiedpfx Aowkbh Red Dji Mast height 690cm Maximum drilling depth 200m The drill is fully functional and ready to work. We are selling it because we have purchased a larger, two-headed device. For more information, please contact us by phone.

Condition: used, Year of construction: 2014, Machinetype: Rotary blasthole Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Iodpfev T Rikjx Ad Djii Drill bits 5X For Atlas copco F9 Used Price Euro. 950.-

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA Iijdev Nhyfspfx Ad Doi - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: used, Year of construction: 2012, operating hours: 6,006 h, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved! Iiedorrbm Rspfx Ad Dsi

Year of construction: 2017, operating hours: 10,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information -Rotary BAT 410 -Engine 390 kW Main winch 30 to -central lubrication -air compressor Machine is in very good working condition! Iiedpfx Ajh Ty Aned Dji

Year of construction: 2014, operating hours: 7,950 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine LIEBHERR 505 kW Rotary Head BAT 510 Prepared for oscillator Good working condition Isdpfsh Ty Agsx Ad Deii immediately available

Year of construction: 2010, operating hours: 7,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base machine CAT 312 Engine 67 kW Rotary head BT 60 / 60 kNm Kelly K 298 4/15m Pull power cord winch 100 kN pull power main winch 100 kN Iijdpfxjh Ty Ace Ad Dji Overall weight 26200 kg LOW HEAD room machine!

Year of construction: 2009, operating hours: 19,800 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Isdpoh Tyz Rofx Ad Djii Engine CAT C9 / 261 kW Base Carrier Sennebogen SR 48 BT Crowd winch pull 420 kN Main winch 250 kN Aux winch 75 kN Operating weight 90 t Transport weight 76,5 t Rotary Head BT 320 (320 kNm) Kelly 419 / 3 / 32 m

Year of construction: 2019, operating hours: 100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Iijdpfx Ajh Tyz Hjd Dei Rotary head Comacchio max.190 kNm Engine Cummins 201 kW More details on require

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S -Upper carriage : Sennebogen BS 80 R -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Iodpfeh Tyz Aex Ad Doii -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2021, operating hours: 50 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Iisdsh Tyzuepfx Ad Doi Main winch 120 kN Aux winch 60 kN Rotary torque 120 kNm Engine Cummins Tier 5! Kelly 343 / 3 / 18 m Washing kit Air compressor Transport weight 30 to with rotary and Kelly !!! More details on require

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Under carriage : Bauer UW 130 Iedeh Tyzbopfx Ad Deii Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Kelly: BK 40 / 470 Main winch : 30 to Ballast 6+6,5+11,5 to