Itrema

Year of construction: 2001, operating hours: 5,466 h, condition: ready for operation (used), Additional Equipment 7 Collets: First three are two-fingered, all others are single-fingered Dkodpfx Agexfwwhjhju 2 Additional Two-Fingered Collets Possible 1 Additional Single-Fingered Collet Possible This HOLZMA HPP 82/43 panel saw was manufactured in 2001. It features a main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW, ensuring robust performance. The machine boasts a cutting length of 4300 mm and a cutting width of 4250 mm, with a saw blade diameter of 380 mm. It has been operational for only 5,466 hours. Consider the opportunity to buy this HOLZMA HPP 82/43 panel saw. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Djdpfoxfcufsx Aghsku Scoring Device Postforming Scoring Device Grooving Device Manual Labeling Angle Cutting Device Automatic Panel Storage This PANHANS Euro 5.1 + MLB 100 panel saw was manufactured in 2006. It features a cutting length of 4200 mm, travel distance stops of 4200 mm, and a main motor power of 11 kW. Equipped with 8 collets, stepless feed up to 80 m/min, and various devices for scoring, grooving, and angle cutting. Ideal for high precision cutting tasks. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 2002, condition: ready for operation (used), This STRIEBIG CONTROL 6224 panel saw was manufactured in 2001. It features a longitudinal cut of 5300 mm, vertical cut of 2240 mm, and a cutting depth of approximately 80 mm. The saw motor power is 5.5 kW with a saw blade diameter of 300 mm. Consider the opportunity to buy this STRIEBIG CONTROL 6224 panel saw. Contact us for more information. Application Types Sawing (Wood) Dkjdpexfctzjfx Aghju

Year of construction: 2011, condition: ready for operation (used), This HOLZMA HPP 250/38/38 panel saw was manufactured in 2011. It features a main saw motor of 9.2 kW and a scoring saw motor of 1.1 kW. It can handle a maximum panel width and length of 3800 mm. Equipped with 8 clamps and 3 air cushion tables, it runs on Windows XP with CADMATIC 4 software. Contact us for more information about this machine. Dkedpfjxcb R Tsx Aghju Application Types Sawing (Wood)

Year of construction: 2015, condition: ready for operation (used), Additional Equipment Highly efficient air cushion work surface Automatic double motorised side stop Djdexadn Aepfx Aghsku Optimised knife/pressure device with self-learning function Main saw motor 15 HP at 50 Hz Av.0YD Office labelling device Manual or automatic panel feed with roller conveyor Wincut Utility Cutty Office This SCM Gabbiani Galaxy T3 110A panel saw was manufactured in 2015. It features a main saw blade with a maximum projection of 115 mm and speeds ranging from 1164 to 3492 rpm. The machine includes a highly efficient air cushion work surface and an automatic double motorized side stop. Consider the opportunity to buy this SCM Gabbiani Galaxy T3 110A panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Optionally available with a new Felder RL 200 extraction system from 2024. Dkodpfxexadn Nj Aghsu This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 2019, condition: ready for operation (used), Main Drive Spindle speed range 3500 Table Table load 6500 kg Additional Equipment Shredder for waste Tiltable side pressure rollers in the cross-cutting area Vibration conveyor for waste after longitudinal cutting Tiltable grippers in the longitudinal cutting area FLEXCUT 02 with 2 movable sets and 3 double grippers in each set Label editor with barcode printer capability Online diagnosis Dksdpfew Ul Etex Aghju This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 5200 mm Measurements depth 6000 mm Machine weight 4567 kg Dedpfx Agewz Srnohjku Main Drive Spindle motor power 7.5 – 11 kW This Biesse Selco WN2 was manufactured in 2021. It features a main saw motor power of 7.5-11 kW and can handle cutting lengths up to 4300 mm and thicknesses up to 60 mm. The saw carriage speed is adjustable up to 100 m/min. It includes a PC-based control with a touch screen interface and cutting pattern optimization software. If you are looking to get high-quality sawing capabilities, consider the Biesse Selco WN2 machine we have for sale. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2007, condition: ready for operation (used), This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine. Application Types Sawing (Wood) Dedowtiyaopfx Aghjku

Year of construction: 1995, condition: ready for operation (used), This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information. Djdjwkkwnjpfx Aghjku Application Types Sawing (Wood)

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 2 Additional Equipment SYSTRAPLAN area storage This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information. Dksdsv Nb Enjpfx Aghsu Application Types Sawing (Wood)

Condition: ready for operation (used), Technical characteristics Djdpfjt U Ufbox Aghsku COMPOSITION: - WEINMANN WMS120 multi-function machining and nailing bridge - 3 x Preparation and assembly tables - Intermediate transfer table Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Line composed of 6 elements: Moulder SAC SUERI (n°1 on the plan): 4 shafts (lower planer, right router, left router, upper planer) 5m-25m/min SAC SUERI top / bottom sander (No. 2 on the plan) : Two groups sanding roller / face Width 300mm Top / bottom conveyor 2 Transfer conveyor with stand by loading table (n°3 and n°5 on the plan) 2 Machining centers for windows SAC HUERI HEXAGON (n°4 and n°6 on the plan) 3 axis machining centers Machine dimensions : 7450 x 3445 x 2530 Useful dimensions: Length 2600mm, Height 120mm, Width h 210mm Manual loading bench 6 parts taking clamps Automatic system of parting exchange between the clamps Wood chips evacuation conveyor Part unloading Integral safety cabin Beckhoff control panel with industrial PC (15" color screen) Composition: 3 machining units : Unit no. 1 (mobile left) Linear tool magazine with 9 positions (HSK 63 F attach system) Main electrospindle 11kW with tool exchange Ø best profiling tool 200mm Crosscut saw 3,1kW (max blade diameter 450mm) 2 spindle unit horizontal axis X 1,5kW Tool holder ER25 Vertical unit 1,5kW Attach system ER25 Unit n°2 (fixed central) 12-position rotary tool magazine (HSK 63 F attach system) 2 Electrospindles for tenoning 11kW with tool exchange Max tenoning tool Ø 300mm Max doveling size 115mm Unit no. 3 (straight mobile) Linear tool magazine with 9 positions (HSK 63 F attach system) Main spindle 11kW with tool exchange Max edging tool Ø 200mm Glazing bead recovery unit 1,8kW (max blade Ø 200mm) 1 head spindle horizontal axis Y 1kW Tool attach system ER25 1st and 2nd vertical spindle 1,5kW Tool attach system ER25 Dedpfet Izimox Aghjku Machining video link : ?v=f2Xh-H_J4M4 Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics transport chain for loading timber - lifting table - 2 automatic roller tables Dedpfx Agetvczmohsku - Dimter 5296 butting unit - gluing unit + glue tank (empty) brand Sperry Vickers - press and exit table (approx. 35 m) - workpiece width 230 mm Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Feeding belt 600 x 1500 1 finger jointing unit with rotating table on mobile carriage with reference Milling and double gluing roller Package 600 mm Max height 180 mm Lengths of wood 200 to 1000 mm Automatic transfer and overturning of finger-jointed pieces Pre-forking station Hydraulic roller press Cutting Max length of wood 4500 mm Right side discharge on table Dkjdpfxottdnae Aghsu Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Djdpsttdndofx Agheku

Condition: ready for operation (used), Technical characteristics Djdpfxjttdnls Agheku 1 automatic feeder 4m 1 brush FRIZ BUE 396 1 OSAMA SV4/350-1800 7335 gluing machine 1 motorized preparation table 1 WEMHONER VSF 3600mm/1800mm hot water plating press 5971071 1 automatic stacker with pneumatic gripping Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics conveyor belt, MAAS transfer range, used DUBUS parade drill Dksdpfx Agottdnwshou gear notching line and drilling: conveyor belt, belt transfer (90 °), return conveyor belt, machining Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 4-sided moulder 6 tool holders 2 finishing planers (top and bottom) Digital positioning Automatic transfer in double tenoner Double fast opening tenoner 620mm high scanned shafts Djdpfxottdnze Agheku Automatic splinters Automatic transfer to roll forming machine Right and left digital roll forming machine Nice compact installation Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Dkjdpfsk Rtxrsx Aghju Enclosed machine Passage height: 150 mm Width of passage: 250 mm to 3200 mm ⌀ shafts: 35 mm Frequency converter 100Hz Feed speed 3-15 m/min COMPOSITION: 1) Double entry tenoner: Left group: 5 shapers 7,5kW 2 speeds: 3000 rpm and 6000 rpm Right group: 3 shapers 7,5kW 2 speeds : 3000 rpm and 6000 rpm 3rd automatic spindle moulder 2) Double output tenoning machine: Left unit: 5 spindle moulders 7,5kW 2 speeds: 3000 rpm and 6000 rpm 2nd, 4th and 5th automatic spindle moulder Right group: 5 spindles 7,5kW 2 speeds: 3000 rpm and 6000 rpm Search by typeDouble Power and Motors Pluging: Three-phased Overall dimensions

Year of construction: 2000, condition: used, Kolbenpumpe mit Oberbehälter und Airmix-Pistole Dkjdpfxsivbdye Agheu