Intensa Technische Dienstleistungen GmbH

Condition: used, Year of construction: 1994, material width 800 mm coil weight 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1400 mm power requirement 2,2 kW Weight 1,9 t Dimensions (WxDxH) 1,6 x 2,2 x 2,6 m with hydraulic auxiliary drive, pneumatic lag brake, hydraulic centralized expansion, hydraulic snubber roll Hedpfx Aeyx Ikzsfpok

Condition: used, For sale: GSW decoiler and GSW straightening machine. Both units are in good used condition (on the decoiler, the motor brake is defective). Decoiler: GSW Serial No.: AHM 1000 433 Load capacity: 1,000 kg Max. coil diameter: 720 mm With arm extension: 1,120 mm Defect: motor brake (out of tolerance) Price: €3,500 negotiable GSW straightening machine: Serial No.: RMA 32 / 114 Max. sheet width: 290 mm Price: €3,500 negotiable Hodpfxoyxbmpj Afpsk Further information and technical details on the equipment are available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 06 61 230, Order No.: Lg 34022 Single-Sided Decoiler BBT ABH 1000/300 New Machine Year of manufacture: 2026 Machine No.: 06 61 230 Hjdpfxoyur Tde Afpek Technical Data Load capacity: max. 1,000 kg Strip width: max. 300 mm Inner coil diameter: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,400 mm Uncoiling speed: approx. 2 to 15 rpm With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gearbox motor. Expansion of the support segments is manual via hand crank and joints. Number of support segments: 3 Coil side guidance via robust adjustable arms, lockable. The decoiler stand is built in a heavy-duty box-section design as a welded construction. Optional equipment: Shutdown 'Loop too small' via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guide on the base housing of the loop control, adjustable in passage width by means of lateral guide rods. Currently in pre-sale. Delivery time approx. 3 months. Image shows reference machine.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Hodpfx Asyt Eldsfpek Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Hodpfxsytqxpe Afpjk

Condition: used, Year of construction: 2008, sheet width - max. 5-150 mm coil weight 2,0 t Belt thickness 0,2-1,5 mm band speed 0-20 m/min driving torque 290 Nm table-size 1500 mm Control Siemens-Leicht range L-W-H 2.000 x 1.500 x 1.900 mm total power requirement 0,75 kW weight of the machine ca. 0,6 t Hedjyr Slhjpfx Afpsk

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Coil diameter: 900 mm Maximum strip width: 220 mm Hodpfxeyr Rdco Afpsk Expanding range: approx. 240 - 550 mm

Condition: new, functionality: fully functional, Year of construction: 2023, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, coil inner diameter: 450 mm, coil outer diameter: 1,200 mm, coil weight: 500 kg, coil width: 300 mm, sheet thickness (max.): 3 mm, overall weight: 190 kg, power: 0.55 kW (0.75 HP), input voltage: 240 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Motorized Coil Sheet Decoiler Model: VILTECH/DOREMA DCT 500/4 CE Strip width: 10 – 300 mm Strip thickness: 0.3 – 2.5 mm (capable up to 3 mm) Coil inner diameter: 450 – 500 mm Coil outer diameter: max. 1200 mm Load capacity: 500 kg Motor: SIEMENS single-phase 0.55 kW Hedjyqxx Ejpfx Afpok Coil centering: manual Drive: geared motor transmission Operation: automatic with direction reversal Delivery from stock Also available: motorized, non-motorized, and hydraulic decoilers with load capacities from 200 kg up to 20,000 kg.

Condition: used, Year of construction: 1973, material width 650 mm coil weight 2,0 t coil internal dia. 380 - 520 mm coil outside dia. 1500 mm speed 20 m/min Power capacity 2,0 kW Weight 1,4 t Hsdpfeymp Szex Afpjk Dimensions (WxDxH) 1,6 x 1,6 x 1,6 m decoiler H 2 with motor, hydraulic expansion, hydraulic snubber roll, coil loop control

Condition: used, Uncoiler S256 3Tn, made by KENT Coil weight : 3 Tn Hjdpfx Ajyma A Defpok Coil width : 250 mm Thickness : 0.8 - 3.2 mm SCOPE OF SUPPLY - 3Tn Single expandable uncoiler - Strip retainer - Control panel Coil weight: 3 Tn Coil width: 250 mm Thickness: 0.8 - 3.2 mm

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Scope of supply includes: - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Hedpfxjymadzo Afpsk Uncoiler rotation/lock: Hydraulic Uncoiler traverse for alignment: Hydraulic Brake pneumatically-operated disc: OTO Mills

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) Hodpfxsylil Es Afpjk -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: used, Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Type: LHM 150/800 Hjdpfx Aeyc Spbofpek Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive Hjdpfsycnf Sox Afpek :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Hodoyci Smjpfx Afpjk

Condition: used, Decoiler and straightener, sheet uncoiler, sheet straightener, coil unwinder, feeder, used machine Overall dimensions: Hedpjybazpofx Afpek Width: 2000 mm Depth: 900 mm Height: 1500 mm Weight: 636 kg Decoiler coil diameter range (min–max): 360–520 mm Electrical data: 400V Straightening width: 205 mm Roller diameter: approx. 35 mm Lower roller set: 4 pcs Upper roller set: 3 pcs

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Hodpfoyangksx Afpek Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Hedpfx Afox Sw U Nopok

Condition: used, JOINT Decoiler – Used – CE Hedpfxjx N S H Io Afpok Model: JDM 8.0 S Capacity: 8,000 kg Weight: 3,700 kg Year of manufacture: 2003 Available quantity: 2 units

Condition: new, Year of construction: 2026, Our modular Forstner decoiling system with decoiler towers and clamping rack offers a space-saving solution for various coil sheet unwinding requirements. The system can be individually equipped with up to eight 2,000 kg decoilers. Additionally, there is the option to integrate a separate pay-off unit for smaller coils up to 1,000 kg, enabling quick and flexible color changes. The clamping rack is a very cost-effective solution for fast and simple manual sheet changes. Up to eight coils can be securely clamped within the rack. The desired sheet is manually fed into the downstream machine using a handwheel. Hjdpfxjx Ngyvo Afpok D2 – Decoiler Unit – space-saving as tower version Decoiler unit for 2,000 kg, braked, single-sided mounting, manual clamping, mounted at top or bottom. The coil is loaded directly onto the cantilevered mandrel using a crane, forklift, or pallet truck. The expansion mandrel is operated manually. Floor pay-off unit for 1,000 kg, braked, double-sided support, oscillating, bottom-mounted. Version: stationary, bottom-mounted Advantage: easy loading Application: frequent coil changes

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; -Barely used (did not fit our use case); Hedpfx Afsx Nf R Hopjk -We can arrange transportation to any European Union country at buyers costs;

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm Hjdsx Ifc Tepfx Afpsk -Weight: 35 kg

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Hjdpfx Afsx Emdgopsk Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, For sale is our GSW feed unit / roller feeder from our mechanical department in Hungary (Szügy). Type: WV 65 / 80 Year: 2004 (very good condition). The feed unit / roller feeder is still installed in the line and can be inspected and demonstrated on site in Szügy, Hungary at any time. We are happy to answer your questions regarding our equipment. Technical data available as a PDF below. Hsdexy E Uwopfx Afpsk

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Hjdoxx R Utepfx Afpjk