Cifra

Condition: used, Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 • Rated temperature: 750 °C Hfodez Azauepfx Ac Asl • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth)

Condition: excellent (used), Year of construction: 1999, For sale: a high-temperature Nabertherm HT-16/17 laboratory furnace, designed for operation at temperatures up to 1750°C. The furnace was used very little and infrequently, so despite its age, it is in very good technical and visual condition. The furnace chamber is clean and well-maintained, and the heating elements and insulation are in very good condition. The unit is fully functional and heats up correctly. This is a robust, professional high-temperature furnace from the renowned German manufacturer, Nabertherm. Technical data: • Manufacturer: Nabertherm Hfedpfx Aozzd Tbjc Asl • Model: HT-16/17 • Controller: C42 • Maximum temperature: 1750°C • Chamber dimensions: approx. 200 × 300 × 260 mm (W × D × H) • Power: approx. 12 kW • Weight: approx. 270 kg • Condition: used, very good

Condition: like new (used), Year of construction: 2014, TWO-ZONE CONVEYOR FURNACE Hfjdpfszzdzrsx Ac Asl - BRAND: IKEO (Italy), year 2014 o “Mouth” dimensions: 80*35 o Belt speed: 0.1 to 3 m/min o Heating chamber dimensions: 80*35*1140 o Cooling chamber dimensions: 80*35*1525 o 1100°C with atmosphere control o Conveyor belt: thin stainless steel o Atmosphere: Nitrogen + H2 or Argon o Power: 25 Kw More photos and documents available upon request. This furnace will be available this summer. It can be inspected in Switzerland. PRICE: 40,000 Swiss Francs, loaded onto a truck. I remain at your disposal.

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Hfsdpfjzx S Emsx Ac Ajl Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 194354, Offer 26187 Technical data: - Nominal temperature / Continuous temperature, stepless, up to 900 °C - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door, and floor - Motorized lift-up door - T. max. approx. 120 min - Drive: 400 V / 59 kW - Internal dimensions approx.: W 1000 x H 550 x D 1900 mm - Usable volume approx.: 950 L - Space required approx.: W 2100 x H 2800 x D 2800 mm - Weight approx.: 2900 kg Hsdozw D H Hspfx Ac Aofl

Condition: good (used), Chamber volume: approx. 72 liters (usable volume) Heating capacity: 18 kW Hsdpfezwfwasx Ac Ajfl Internal dimensions (W x D x H): approx. 400 x 600 x 300 mm Temperature: 1,200 °C Controller: G 400

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Hfsdpfx Acozu Ngaj Ajl

Condition: ready for operation (used), Heraeus MR 260 Annealing Furnace Internal dimensions: 260mm x 500mm x 160mm (W x D x H) Space required: 1100mm x 700mm x 1560mm (L x W x H) Weight: 150 kg Rated temperature: 1000°C You are welcome to visit us for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Hodpfx Acszu Nato Ajfl Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2009, Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Documentation available: No - CE certificate present: No Hfedpfezry Ipex Ac Asl - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Nabertherm N60 / 45HA Muffle Furnace Max. temperature: 450°C Usable volume: 60 liters Internal dimensions: 350mm x 500mm x 350mm (W x D x H) Description taken from original listing. You are welcome to come and inspect the furnace. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Hjdozqz Nfspfx Ac Aofl For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2008, functionality: unexamined, power: 25 kW (33.99 HP), type of input current: three-phase, temperature: 200 °C, total length: 1,630 mm, total width: 1,700 mm, total height: 2,950 mm, overall weight: 1,650 kg, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We offer a used Nabertherm N 150/03 CDB, manufactured in 2008. This is a furnace for the catalytic removal of adhesive residue from parts coated using the metal or ceramic powder injection method. The binder contained in the load undergoes chemical decomposition using nitric acid and is removed in the form of a gas. Model: N 150/03 CDB Serial number: 199905 Year of manufacture: 2008 Maximum temperature: 200 °C Rated voltage: 400 V 3/N/PE ~ Frequency: 50/60 Hz Current: 50/23/26 A Power: 22.4 kW TECHNICAL DATA: ✅ Capacity: 150 l ✅ Maximum temperature: 200°C ✅ Chamber dimensions: 450x450x750 mm ✅ Overall dimensions: 1625x1930x2850 mm ✅ Total power: 25 kW ✅ Catalyst, programmable, historical curve tracking, nitric acid pump EQUIPMENT: ✅ Monitoring of nitric acid flow via a probe ✅ API control Hfjdpfxjzp Hfpj Ac Aol ✅ Siemens S7-300 If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, functionality: limited functionality, Technical specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical data according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Hsdpfsznv Eiex Ac Asfl Research and development Unfortunately, 2 rotary knobs are broken, but the potentiometers still work. However, it is unclear what setting they correspond to. This is more suitable for hobbyists.

Condition: used, Manufacturer: David + Baader, Kandel Type: 10880.3 Machine type: Industrial furnace / Chamber furnace / Heat treatment furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories, and workshops and is ideal for heat treatment, drying, or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Design: Electric chamber furnace Condition: Used Hodpfx Ajznv Dfoc Ajfl Further technical data available upon request or as per the nameplate Features and advantages Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible applications Heat treatment of metal parts Annealing and tempering processes Drying processes Laboratory and testing applications Research and development Workshop and production operations

Condition: used, Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine type: Electric chamber furnace / laboratory furnace / heat treatment furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideally suited for heat treatment processes, annealing, material testing, laboratory applications, as well as research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratories, workshops, industry, and research Solid German quality manufacturing Maximum temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Application areas: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Hodpeznvzdjfx Ac Aofl Research and development Chamber dimensions (internal): Width: 260 Height: 180 Depth: 500

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Hfjdpfszduplox Ac Ajl 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model Hfjdszc Ihaepfx Ac Ael N81 Serial Number 72019 Year of Manufacture 1988 Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: good (used), Year of construction: 2014, For sale: a professional Nabertherm L40/12 muffle furnace with a working temperature of up to 1200°C. Hfodpfxszb Iv Uj Ac Aol Ideal for ceramics, laboratories, heat treatment of metals, sintering, sample roasting, and many other applications. Model: L 40/12 / B180 Power: 6 kW Power supply: 400 V Max. temperature: 1200 °C Chamber volume: 40 liters Year of manufacture: 2014 Condition: Functional, heats up properly Weight: approx. 70 kg

Condition: excellent (used), Year of construction: 2018, - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Hedszbnnwspfx Ac Aefl Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Hsdjy Ud H Repfx Ac Aefl Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on both sided (tunnel) Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Hsdpjy Sxtgjfx Ac Aofl Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties.

Condition: new, functionality: fully functional, power: 120 kW (163.15 HP), input voltage: 380 V, inner dimension length: 7,200 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 8,233 mm, total width: 1,800 mm, total height: 2,553 mm, overall weight: 3,000 kg, control type: NC control, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial unit ✅ Proton Maschinenbau GmbH is the exclusive authorised European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-151872 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and cure time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at end of cure cycle ✅ Insulated door with special locking system ✅ Robust sandwich panel construction with high-performance insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shutdown at end of process ✅ Compatible with mobile part carriage ✅ Optional insert shelving system for small batch production ♨️ Also available (optional) as a high-temperature version up to 500°C. ⚡ Depending on model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-151872 ✔️ Internal / external dimensions: see technical drawing in photo gallery ✔️ Electric heating power: 120 kW ✔️ Blower capacity: 2 x 4,500 m³/h = 9,000 m³/h ✔️ Recirculation fan: 2 x 3.00 kW ✔️ Exhaust fan: 0.75 kW ✔️ Total power consumption: approx. 128 kW ±10% ✔️ Digital heat control ✔️ Continuously adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanised steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm glass fibre Hfodpfx Acey Ny Tpj Asl ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 pc More MATOVENB powder ovens in various sizes available. Dimensions and technical data of other models can be found in the attached catalogue. ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature profiles ✅ Process parameter memory ✅ Weekly & monthly reporting at the touch of a button ➖➖➖➖➖ 🛡️ Safety and Process Control Safety sensors to prevent overheating Automatic shutdown in case of malfunction Acoustic warning signals in case of faults Smoke extraction via automatic venting ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Precisely control temperature profiles and holding times: • Reach target temperature in a defined time • Maintain the desired setpoint time • Controlled cooldown to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire-purchase or instalment payment options. ➖➖➖➖➖ Special sizes or customised designs available on request. We are happy to plan a suitable solution for your workshop. Get in touch now – prepare your business for professional powder coating!

Condition: good (used), Internal item no.: 25121 Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Hjdeyxpdcjpfx Ac Asfl Weight: approx. 200 kg

Year of construction: 1998, condition: ready for operation (used), functionality: unexamined, input frequency: 50 Hz, usable tank capacity: 2,100 l, temperature: 100 °C, No minimum price – guaranteed sale to the highest bidder! Hfjdpfx Acoyxdafs Ael TECHNICAL DETAILS Oven Data Usable volume: 2.1 m³ Drying temperature: 100 °C MACHINE DETAILS Dimensions (LxWxH): 200cm x 150cm x 150cm Electrical data Voltage: 400 / 230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 604348, functionality: unexamined, operating temperature: 100 °C, heating capacity: 9 kW (12.24 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 100 °C MACHINE DETAILS Dimensions LxWxH: 143 x 70 x 35 cm Hfsdpjyxc Tqsfx Ac Ajl Type of heating: electric Electrical data Rated voltage: 400 V/230V 50 Hz Connected load: 11 kVA Heating capacity: 9 kW Rated current/Fuse protection: 16.5 A / 20 A Protection class: IP 43

Year of construction: 1996, condition: ready for operation (used), functionality: unexamined, operating temperature: 250 °C, heating capacity: 36 kW (48.95 HP), usable tank capacity: 4,500 l, machine/vehicle number: 603928, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 250 °C Usable volume: 4.5 m³ MACHINE DETAILS Hfjdpfxjyxc I Io Ac Ajl Type of heating: electric Dimensions (LxWxH): 200 x 150 x 150 cm Electrical Data Rated voltage: 400/230 V 50 Hz Connected load: 40 kVA Heating capacity: 36 kW Rated current/fuse: 58 A/63 A Protection class: IP 43 Exhaust air flow at 20°C with dampers open: 376 m³/h Exhaust air flow at 20°C with dampers closed: 133 m³/h