Danfoss Trata

Condition: good (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm Bljdsza Ax Iopfx Af Reh - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Max. machining diameter: 2,800 mm Machining height: 1,000 mm Tool holder: CAPTO 6 Including chip conveyor and 2 supports Bledpfx Aszacfnsf Reh

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Machining diameter: 4,000 mm Machining height: 1,400 mm Cross slide travel: 850 mm Bsdpfx Aszacfbef Relh Including chip conveyor and 2 supports

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after Blodpfx Afoy Uxdke Rjh commissioning. Very full documentation is available upon request Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Price, ex works UK Midlands £330,000 VTT-WB can quote transport installation and commissioning

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal Bjdpfxoy Uw Sge Af Rslh When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Only the best machine tools are designed and built with this quality and strength

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system Blsdpsy Uw Emjfx Af Reh New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy Bodpoy Uwxtofx Af Rjlh – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between Bledpsy Uwg Rsfx Af Rsh If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Loading Time: 2–4 s Bledoy Uvp Rjpfx Af Reh • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 40 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes Blsdpfxey Uvf Es Af Reh • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Maximum X Travel: 850 mm • Z Travel: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details. • Operation Type: OP 20 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: No • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V Blodpfx Afsy Uuybo Reh • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details. • Operation Type: OP 10 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power 40% Duty Cycle: 39 kW • Spindle Power 100% Duty Cycle: 28 kW • Torque 40% Duty Cycle: 460 Nm • Torque 100% Duty Cycle: 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Approximate Machine Weight: 12,000 kg • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes The technical specifications may vary slightly, as these are custom-made machines! Blodpfx Afjy Uuxks Reh Technical Specification Driven Tools No

Condition: like new (used), Year of construction: 2017, operating hours: 5,100 h, functionality: fully functional, machine/vehicle number: 110366, Number of axes: 5 + V Maximum turning diameter: Ø160 mm Maximum turning height: 150 mm Maximum diameter of workpiece: Ø100 mm Maximum height of workpiece: 150 mm Bjdjy Ukgkopfx Af Rjlh Maximum spindle speed: 6000 rpm Travel – x 700 mm Weight: 6000 kg.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Bsdpfxjy T Iupo Af Rjlh Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Operating hours: 5,426 h

Condition: ready for operation (used), Year of construction: 2006, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040033, rotational speed (max.): 5,000 rpm, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Work area X-axis: 360 mm Work area Y-axis: 120 mm Work area Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle ED main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h Bodpfjy T Itrox Af Rjlh EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040018, rotational speed (max.): 5,000 rpm, controller model: SIEMENS Sinumerik, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Working area, X-axis: 360 mm Working area, Y-axis: 120 mm Working area, Z-axis: 260 mm Handling area, X/Z: 490/260 mm Bodpfxoy T Im Es Af Rslh Maximum spindle speed: 5,000 rpm Spindle through-hole diameter: 65 mm Spindle diameter at the front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force, X/Y: approx. 8,000/10,000 N Feed force, Z: 10,000 N Rapid traverse rate, X/Z/Y: approx. 80/40/7.5 m/min Acceleration, X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Bodoy T Ikkspfx Af Rslh Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Blodpfxjy T Id Dj Af Reh Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Blodpfsy T Iddjx Af Rjh Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 925 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 3, This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details. • Spindle operating hours: 38,984 h Blodpoy T Iarsfx Af Roh • Axis travels (approx.): X 925–1100 mm; Z 300–350 mm; Y (optional) ±90 mm • Chuck diameter: 250 mm • Turret: 12 positions • Workpiece capacity (model typical): Max diameter approx. 350 mm; max length approx. 200 mm; max weight typically 100–300 kg (depending on setup) • Current configured workpiece diameter (turning): Ø 320 mm Additional equipment • Chip conveyor • High-pressure coolant system with paper filter • Automatic workpiece loading from tray Technical Specification Driven Tools No

Condition: good (used), Year of construction: 2022, machine/vehicle number: 25666, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm Bsdpfx Afey Tybze Rolh -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Bjdsy Tybnepfx Af Relh Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Bedpey S Ty Uefx Af Relh Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining • Complete robot automation including infeed and outfeed conveyors

Condition: good (used), Year of construction: 2006, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining • Complete robot automation including infeed and outfeed conveyors Bsdpoy S Tx Djfx Af Rjlh

Condition: used, Year of construction: 2009, swing diameter 1400 mm faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm table load 6 t total power requirement 80 kW Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN Blsdpfx Afsy S D Tfj Roh The machine enables additional drilling and milling via an integrated milling unit in the tool change system.