Nucleum Development Srl

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Enclosed cab Air conditioning Rear view camera 6 drill rods (complete set) Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m. Dodpfxoxhchwe Aghoku

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Dkjdpexb Hgdsfx Agheu Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21280 Specifications: 2005 model 16,457 engine hours 9,610 drilling hours Djdpfxexbbcgj Aghsku Weight: 8,500 kg KW: 88 Steel tracks Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS

Condition: used, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21270 Specifications: Model year: 2016 Drilling hours: approx. 1400 Weight: 10,000 kg Dkodpfxsxatqmj Aghsu Undercarriage (see pictures) Winch Ready for delivery Description:2016 Sandvik Dino DC400Ri drilling rig with an almost new undercarriage.The undercarriage was replaced after the last job.The rig is ready for delivery. Own weight: 10000 Model: DC400RI

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Djdpfx Asw Ucm Ueghoku Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Dkjdpfew Rag Dex Aghju Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: good (used), Year of construction: 2010, operating hours: 13,808 h, Equipment: air conditioning, Drivetrain Drive: Track Make of engine: C18 Weights Empty weight: 77.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: F056742 Other information EPA Marked: yes Delivery terms: EXW Transport dimensions (LxWxH): 20,8x3x3,6 Production country: DE Dksdpow H Icyofx Aghsu Additional information Please contact Matthias Eyckmans, Jeroen Heindryckx or Bart Apers for more information

Condition: good (used), Year of construction: 2013, operating hours: 7,638 h, Equipment: air conditioning, Drivetrain Drive: Track Make of engine: C15 Weights Empty weight: 62.000 kg Functional CE mark: yes Condition Technical condition: good Dkedpfxew H Icto Aghju Visual appearance: good Identification Serial number: F095088 Other information EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 18,105x3,4x3,5 Production country: DE Additional information Please contact Matthias Eyckmans, Jeroen Heindryckx or Bart Apers for more information

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Dsdpfx Agowvzrmohjku Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: good (used), functionality: fully functional, Year of construction: 2008, * Engine hours 10,644 Dodpfjwl Dupsx Aghsku * Drilling hours 4,039 * Engine power 224 kW * Operating weight 21,600 kg

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 8,000 kg, Year of construction: 2022, operating hours: 2,800 h, Hello, I have a Beretta GT52 vertical drilling rig for sale, year of manufacture 2022, operating hours 2500. The rig is equipped with: - CAT engine with a power of 136 HP with the latest Stage V emission standards - Bellin 1200L screw mud pump (capacity 500 l / min and 12 bar discharge pressure) - Hydraulically lifted rod magazine - Winch with a pulling force of 2000 kg Dsdpfx Aowkbh Rjghsku - Floating head with vibration damper, used with a DTH hammer (possibility of drilling with both a hammer and a rotary mud) - Hammer lubricator + air line - Magnetic system for feeding the rod / pipe set. - Triple jaws (can be used to drill with casing pipes) Dimensions (folded): width 190cm, height 249cm, length 580cm. Mast height 690cm Maximum drilling depth 200m The drill is fully functional and ready to work. We are selling it because we have purchased a larger, two-headed device. For more information, please contact us by phone.

Condition: used, Year of construction: 2014, Machinetype: Rotary blasthole Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Djdpjv T Rikofx Agheku Drill bits 5X For Atlas copco F9 Used Price Euro. 950.-

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons Dkedpfxev Nhyfs Aghju - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Dodpfxsvgy E Us Agheku Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Condition: used, Year of construction: 2012, operating hours: 6,006 h, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, Dsdpfx Agsrrbm Roheku On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Year of construction: 2017, operating hours: 10,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information -Rotary BAT 410 -Engine 390 kW Main winch 30 to -central lubrication -air compressor Djdpfx Ajh Ty Aneghoku Machine is in very good working condition!

Year of construction: 2014, operating hours: 7,950 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine LIEBHERR 505 kW Dkedpfsh Ty Agjx Agheu Rotary Head BAT 510 Prepared for oscillator Good working condition immediately available

Year of construction: 2010, operating hours: 7,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base machine CAT 312 Engine 67 kW Rotary head BT 60 / 60 kNm Djdjh Ty Acepfx Aghoku Kelly K 298 4/15m Pull power cord winch 100 kN pull power main winch 100 kN Overall weight 26200 kg LOW HEAD room machine!

Year of construction: 2009, operating hours: 19,800 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine CAT C9 / 261 kW Base Carrier Sennebogen SR 48 BT Crowd winch pull 420 kN Main winch 250 kN Aux winch 75 kN Dksdpfoh Tyz Rsx Agheu Operating weight 90 t Transport weight 76,5 t Rotary Head BT 320 (320 kNm) Kelly 419 / 3 / 32 m

Year of construction: 2019, operating hours: 100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Djdpfeh Tyz Hsx Aghjku Rotary head Comacchio max.190 kNm Engine Cummins 201 kW More details on require

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S -Upper carriage : Sennebogen BS 80 R Dkedpfx Agjh Tyz Aohsu -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2021, operating hours: 50 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Dodpfoh Tyzuex Aghjku Main winch 120 kN Aux winch 60 kN Rotary torque 120 kNm Engine Cummins Tier 5! Kelly 343 / 3 / 18 m Washing kit Air compressor Transport weight 30 to with rotary and Kelly !!! More details on require

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Under carriage : Bauer UW 130 Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Dsdpfoh Tyzbox Aghjku Kelly: BK 40 / 470 Main winch : 30 to Ballast 6+6,5+11,5 to

Year of construction: 2013, operating hours: 7,550 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base Carrier Sennebogen BS 95 Under Carriage Bauer UW 130 Engine CAT C15 with 433 kW Rotary KDK 390 S Working Hours 7.550Hrs Kelly Bar available in different lengths Big Single layer winch 3m mast extension Prepared for oscillator and BTM drilling Good working condition! Dksdjh Tyy Tspfx Aghsu

Year of construction: 2015, operating hours: 7,500 h, condition: used, Field of application: Construction Dedpfx Agoh Tyy Nsheku Please contact Mohamad Fattah Ahmad for more information Rotary Head KDK 300S Base carrier Sennebogen BS 95 Under carriage BAUER UW 110 (Vorbereitet für BV) Engine CAT C15 / 433 kW Kelly 419/3/30 m B- Tronic for Kelly, SOB, VDW und FDP