KMS 2020 GmbH

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,200 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate, lashing eyes Body: Roll-off container with drive-over rear flap, approx. 11 m³, spring-assisted, ARCHIVE IMAGES. Roll-off container according to DIN 30722-1, lubricatable external rollers, 5 mm floor, walls made of 3 mm steel, frame spacing 750 mm, continuous tarpaulin and mesh hooks, C-locking, galvanized climbing irons at the front according to UVV, foldable and spring-assisted swing flap, 8 x 2.5 t lashing eyes, 4 per side recessed into the side wall, 2 lashing eyes on the front wall, finished in RAL 7016 anthracite grey! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Djdpfx Ajyzt E Ajhuocf

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,200 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate, lashing eyes Dsdpfx Aeyzt Evshuscf Body: Roll-off container with drive-over rear flap, approx. 11 m³, spring-assisted, ARCHIVE PHOTOS - Roll-off container according to DIN 30722-1, externally greaseable rollers, 5 mm floor, 3 mm steel walls, frame spacing 750 mm, continuous tarpaulin and net hooks, C-lock, galvanized climbing irons at the front according to UVV regulations, foldable and spring-assisted swinging tailgate, 8 x 2.5 t lashing eyes (4 per side embedded in the side wall), 2 lashing eyes on the front wall, in RAL 7016 anthracite grey! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,200 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel bodywork, tailgate, lashing eyes. Body: roll-off container with drive-over rear flap, approx. 11 m³, spring-assisted, ARCHIVE PHOTOS. Roll-off container according to DIN 30722-1, greaseable external rollers, 5 mm floor, walls made of 3 mm steel, frame spacing 750 mm, continuous tarpaulin and net hooks, C-locking, galvanized front climbing irons according to UVV, swing tailgate that folds down and is spring-assisted, 8 x 2.5 t lashing eyes (4 per side integrated into the side wall), 2x lashing eyes at the front wall, in RAL 7016 anthracite grey! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dodpfxeyzt Epj Ahujcf

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,200 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate, lashing eyes Dsdoyzt Eiepfx Ahuocf Body: Roll-off container with drive-over rear flap, approx. 11m³, spring-assisted, ARCHIVE PICTURES Roll-off container according to DIN 30722-1, greaseable external rollers, floor 5mm, walls made of 3mm steel, frame spacing 750 mm, continuous tarp and net hooks, C-locking mechanism, galvanized climbing irons on the front according to accident prevention regulations, fold-down and spring-assisted swing tailgate, 8 x 2.5 t lashing eyes (4 per side) recessed into the side wall, 2x lashing eyes on the front wall, painted in RAL 7016 anthracite grey! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 27,800 km, power: 130 kW (176.75 HP), first registration: 01/2011, fuel type: diesel, empty load weight: 5,800 kg, maximum load weight: 3,700 kg, overall weight: 9,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, next inspection (TÜV): 07/2026, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,400 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, trailer coupling,

Condition: used, mileage: 170,780 km, power: 110 kW (149.56 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 4,555 kg, maximum load weight: 2,935 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel body, license marked as house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, sun visor, 6-speed switch, ABS (anti-lock braking system), PTO (power take-off), frame cladding, leaf suspension, trailer coupling with air, light, and hydraulic connections, ball-type trailer hitch, underride protection, swinging tailgates, roof hatch, yellow environmental badge. Wheelbase: 3020 mm Structure: Meiller 3-way tipper body, differential lock on rear axle, front axle 3.5t, rear axle H2 6.2/7.2t, crown wheel 325, ABS, disc brakes on front and rear axles, rear axle stabilizer under frame, Meiller 5-piston type 254/1, PTO MB 60-1C MPA. Loading height approx. 1190mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dcjdpoyzt D Sefx Ahuof

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute Dcodpfx Asyzt D Eehusf 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: used, Manufacturer of the office container Grinbold-Jodag Air conditioner manufacturer Frigo Line We offer: Office container including air conditioning Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dcedpfx Aheyzt Dxsuef Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), machine/vehicle number: 3613, Year of construction: 2008, load capacity: 33,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,160 mm, total width: 3,440 mm, operation weight: 40,000 kg, additional equipment features: Front mud guards, Centralized greasing system, Dual tread, Equipment: lighting, Kalmar DCF330-12LB from Uniktruck Dcsdpfsyzt Drox Ahusf

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm Dcjdpfx Aheyzt Dleuof table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 22.465 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), machine/vehicle number: 3612, Year of construction: 2009, load capacity: 16,000 kg, lifting height: 4,060 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,330 mm, total width: 2,600 mm, operation weight: 22,600 kg, additional equipment features: Front mud guards, Rear mud guards, Weight system, Dual tread, Equipment: lighting, SveTruck 16120 from Uniktruck Dcodpfx Aeyzt Dfshuof

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Dodpfx Aeyzt A Ujhujcf Prior sale is reserved.

Condition: good (used), machine/vehicle number: 3611, Year of construction: 2016, load capacity: 22,000 kg, lifting height: 4,500 mm, mast type: duplex, total length: 6,090 mm, total width: 3,050 mm, operation weight: 36,800 kg, additional equipment features: Dual tread, Centralized greasing system, Equipment: lighting, Kalmar DCG220-12 from Uniktruck Dcjdpfeyzt A Iox Ahujf

Condition: good (used), mileage: 861,485 km, power: 330 kW (448.67 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - EPS (Electronic Power Steering) - Low noise - Intarder - Tipping hydraulics - Air horn - Particulate filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater = Further Information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,864 kg Payload: 10,136 kg Gross vehicle weight (GVW): 18,000 kg Technical condition: Good Visual condition: Good Reference number: 70 Vehicle number: 70 Mercedes Benz Actros 1845 StreamSpace / Tipping hydraulics / Retarder / Stationary air conditioning / Euro 6 / Model year 2016 Chassis number: WDB9634031L979009 Model year: 2016 Suspension: Leaf/Air Transmission: Automatic Air conditioning Stationary air conditioning Retarder Engine brake Dedpjyzt Azsfx Ahuscf Cruise control Auxiliary heater Proximity control assist Lane keeping assist Emission standard: EURO 6 Tipping hydraulics No liability for printing or typographical errors. Subject to changes, prior sale, and errors! = Company Information = No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: used, Year of construction: 2002, travel -x axis 880 mm travel -y axis 630 mm travel -z axis 630 mm control HEIDENHAIN - TNC 426M number of spindle speeds 12.000 U/min numbers of positions in the tool changer (2 x 16) 32 Tool bore SK 40 surface area 1.250 x 700 mm table load 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. Dodpfxeyzt Aus Ahuocf - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm Dcjdpfx Aheyzt Anjujf z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2012, turning diameter 320 mm turning length 330 mm Dodjyzt Ahjpfx Ahuecf control Fanuc oi-TD weight of the machine ca. 2600 kg

Condition: used, number of aggregates 6 St. Dcsdpfx Aoyztz Rohujf cutting width ~ 5.000 mm Cutting height ~ 100 mm Daveba multiple cross-cut saw for simultaneously cutting long boards to several shorter ones (with variable length) without mechanization. The system is dismantled and ready for loading.

Condition: used, Year of construction: 2019, used, top condition, low hours Brand: Bernado Model: DC-500-E Year of manufacture: 2019 Machine no.: 19PW01011091 Motor: 2.2 kW Connection diameter: 3x100/160 mm Collection bags: 2 pcs / size 500 mm 2 filter bags Space requirement approx. 1600 x 600 x 2200 mm Storage location: 97447 Gerolzhofen, loaded free on truck, unpackaged Transfer in as-is condition as inspected, without warranty or guarantee Dodpjyztz Dsfx Ahuscf

Condition: used, Year of construction: 2002, used, excellent condition, lightly used, school machine Manufacturer: Weeke Model: BHC 250 Dedpfx Asyztzwehuscf Travel range x-axis: 2310 / 2100 mm Travel range y-axis: 1010 / 800 mm Travel range z-axis: 135 mm Tool changer: 5-fold Extraction connection: 160 mm Space requirement approx. 4100 x 3100 x 2000 mm Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without guarantee or warranty

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Dcsdoyztzqspfx Ahujf Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: used, used, in good condition with new feed rollers Dcodpfsyztzkox Ahusf Brand: Holzher Type: ET2 Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: ready for operation (used), Strip width: 300 mm Strip thickness: 0.4 - 2.5 mm at maximum strip width Number of straightening rollers: 11 pcs Number of feeder rollers: 2 pcs Number of exit rollers: 2 pcs Roller diameter: 60 mm All upper rollers manually adjustable All lower rollers interconnected by gears Variable speed, manually adjustable via handwheel Dcodpfx Asyztzdehuef Loop control via touch arm Strip guide at inlet Roller basket at outlet

Condition: used, bore capacity in steel (diameter) 40 mm threading bis M 30 throat 330 mm bore stroke 180 mm 4 Dcodsyzty Tepfx Ahujf speeds 60 - 765 U/min table-size 720 x 360 mm total power requirement 2,6 / 3,2 kW weight 350 kg dimensions 720 x 1100 x 2050 mm Equipment: - automatic feed - infinitely variable speed - thread cutting device - adjustable drilling depth stop - coolant device - spindle protection - drill chuck

Condition: new, table length 1000 mm table width 1000 mm table height 100 mm bore 16 mm Dcjdpsyzty Hofx Ahujf weight 200 kg Special offer: Exhibition use – slight scratches on the surface Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups