Mezanin

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS CNC gear and pin hobbing machine – TSM series Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC Guodjzddzrepfx Ahvoc EQUIPMENT Operating manual available Documentation and software available

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Gedpfx Ahozddwmjvouc Reinforced base frame Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: GE-50RAY, shaft length: 1,064 mm, workpiece weight (max.): 20 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 125 kg, warranty duration: 24 months, height adjustment type: electric, laser wavelength: 1,064 nm, Equipment: cabin, Exhibition model at special conditions – Secure yours now! 50-watt fiber laser with 2-year warranty Due to new deliveries, we are selling our demonstration and exhibition machines at attractive special prices. Take advantage of this opportunity and secure a high-quality fiber laser, including a 2-year warranty, German software, and comprehensive service directly from Germany. Your advantages at a glance: ✅ Exhibition model in very good condition ✅ 2-year warranty ✅ German user software and operating manual ✅ Ready for immediate use – no programming knowledge required ✅ Service, support and spare parts directly from Germany ✅ Personal on-site or remote instruction Our services: Personal delivery and installation Setup and training on-site or via remote connection Ongoing technical support Fast service and spare parts supply from Germany Technical data (model-dependent) Laser power: 50 watts Wavelength: 1064 nm Frequency range: 20–100 Hz Marking field: 150 x 150 mm (optional 50, 70 or 110 mm) Repeatability: ± 0.003 mm Engraving speed: up to 7000 mm/s Marking software: EZCAD German / English Pilot laser for preview Laser class 1 Electric lifting column with motor control Max. component height: approx. 300 mm Connection: 230 V Air-cooled system Weight: approx. 170 kg Service life: over 100,000 operating hours Low maintenance and energy-efficient Included: Laser head 150 x 150 mm CE declaration of conformity 2-year warranty German software Training and instruction Invoice with VAT Scope of delivery: USB cable Power cable Stops USB stick with parameters German operating manual Foot pedal Laser safety glasses Application areas: Ideal for: Texts and serial numbers Logos and graphics QR codes and DataMatrix codes Variable data sets Guodpfjzcrbqjx Ahvjc Image engraving Metal engraving and marking Plastics and coated materials Software EZCAD 2.14.0 (German) Supported file formats: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Shipping & Installation If shipped, we set up the machine via remote connection and provide instruction. Alternatively, we offer personal delivery, on-site installation, and training for your employees. Shipping costs are agreed upon individually based on the postal code. Consultation We will gladly prepare an individual offer for you. Contact us today and learn more about the advantages of our fiber lasers. Also available as a 100-watt and 200-watt version! Secure this exhibition model now before the new goods arrive.

Condition: used, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 445 mm, total height: 938 mm, total length: 851 mm, overall weight: 65 kg, warranty duration: 24 months, height adjustment type: electric, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 300 is a compact fiber laser marking system designed to deliver precise engraving on metals, plastics, and industrial materials with exceptional speed and reliability. Based on Trotec's proven galvo technology, this machine combines a 30W fiber laser source with intelligent autofocus and intuitive software integration to streamline your marking process. Whether you are marking stainless steel components, anodized aluminum, or technical plastics, the SpeedMarker 300 produces clean, permanent marks at production-level throughput. Perfect for manufacturers seeking consistent quality and small-to-medium-sized businesses expanding their engraving capabilities, this machine balances performance and affordability without compromising precision. Key features: The 30W fiber laser delivers high-speed marking on ferrous metals, stainless steel, and anodized surfaces in seconds per part, making it ideal for high-volume production environments where throughput directly impacts ROI. Integrated autofocus technology automatically adjusts for material height variations, eliminating manual focus adjustments and ensuring consistent mark depth across batch runs of varying components. The galvo-based optical system provides fast beam deflection and pinpoint accuracy, producing crisp, fine-detail marks with line widths as small as 0.1mm without sacrificing production speed. User-friendly software compatible with industry-standard formats (PDF, DXF, AI) allows operators to set up custom marking jobs in minutes, with real-time preview and mark simulation before production. Gujdpfxjzcc Uzo Ahvjc The compact tabletop design, with optional integration into existing assembly lines or workstations, makes the SpeedMarker 300 an efficient choice for businesses with limited floor space seeking industrial-grade marking capabilities.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 115 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,221 mm, total height: 1,066 mm, total length: 830 mm, warranty duration: 24 months, height adjustment type: electric, scan area length: 813 mm, scan area width: 508 mm, travel distance X-axis: 813 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 210 mm, input current: 8 A, laser wavelength: 10,600 nm, working height: 210 mm, opening width: 890 mm, space requirement length: 830 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 25 °C, working width: 813 mm, Equipment: cabin, The Trotec Speedy 360 is a high-performance CO₂ laser engraving and cutting system designed for professional production environments. With a working area of 813 × 508 mm and laser power options up to 120 W, it enables precise processing of a wide range of materials including wood, acrylic, plastics, textiles, and more. The system features high-speed engraving up to 3.55 m/s, a programmable Z-axis for flexible working heights up to 210 mm, and advanced technologies such as OptiMotion™, Sonar Technology™ autofocus, and Ruby® laser software. Its robust design, air-cooled laser source, and intelligent workflow integration ensure consistent quality, high productivity, and reliable operation in industrial, educational, and commercial applications. Godpezcbycsfx Ahvouc

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, laser power: 60 W, type of cooling: air, total width: 1,520 mm, total height: 1,115 mm, total length: 1,205 mm, overall weight: 275 kg, warranty duration: 24 months, travel distance X-axis: 875 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 225 mm, Reliable cutting and engraving quality is ensured by proven core technologies and a robust design, which minimize downtime and keep your production running smoothly. A simple, efficient workflow with Ruby® Essential combines design, job preparation, and machine control into one connected platform for faster, clearer, and more intuitive operation. OptiMotion™ automation enables clean, fast cuts by dynamically adjusting speed and acceleration, saving setup time while consistently achieving high-quality results. Gujdpfx Aozcazlshvsc Centralized system control and smart electronics provide real-time monitoring of the laser, exhaust system, filters, and temperature, increasing uptime and making operation easier, even for beginners. Flexible support options allow you to start with an attractive entry-level system and add premium Trotec training, service, and spare parts support whenever you need it.

Condition: ready for operation (used), A Deckel engraving and copy milling machine is available. Table dimensions X/Y: 350mm/200mm, travel X/Y: 300mm/150mm, machine dimensions X/Y/Z: approx. 1100mm/1300mm/1500mm, weight: approx. 500kg. An on-site inspection is possible. Gedpfszbuu Dsx Ahvsuc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The used HBS GQ 20A1 laser marking machine with rotary axis is a fully enclosed, all-in-one unit equipped with a 20W fiber laser, a rotary axis for engraving cylindrical parts, and an integrated PC system. Gujdpfx Ahozburvovjc With a standard marking area of 110 x 110 mm, a motorized Z-axis, and a compact, wheeled structure, it is very practical. Manufactured in 2018, CE compliant, complete with manuals, and in excellent condition, as shown in the photos.

Condition: ready for operation (used), Year of construction: 2008, laser power: 50 W, This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details. - Maximum Workpiece Dimensions (W x H x D): 680 mm x 500 mm x 700 mm- Maximum Workpiece Weight: 50 kg (without X/Y axis), 25 kg (with X/Y axis)- Traverse Path Z-Axis: 500 mm- Traverse Path X-Axis: 300 mm- Traverse Path Y-Axis: 300 mm- Traverse Speed Z-Axis: 1.5 m/min- Traverse Speed X-Axis: 6 m/min- Traverse Speed Y-Axis: 6 m/min- Electrical Connection (Voltage): 115 V / 230 V- Electrical Connection (Frequency): 50 Hz / 60 Hz- Maximum Power Consumption: < 2.55 kW- Workstation Dimensions (W x H x D): 860 mm x 2000 mm x 1310 mm- Workstation Weight (without laser): 410 kg- Laser Class: Class 1- Laser Compatibility: Combined with VMc 1-6 and TruMark 7020 marking lasers Godjza Albopfx Ahvjuc

Condition: not inspected (used), Industrial Engraving and Identification System, Dot Peen Marking Machine, MARKATOR MV5 Automatic Industrial Dot Peen Marking Station with Rotary Axis / Safety Enclosure, Markator MV5 SE-MK, Used Machine Manufacturer: MARKATOR Manfred Borries GmbH (Germany) Type: MV5 SE-MK Control unit type: MV5 SE-MK power unit with integrated display and industrial keyboard control panel Overall dimensions: Width: 1220 mm Depth: 1930 mm Height: 2100 mm Clamping range: 19–23 inch Gujdpfx Aezauf Hohvjc Premium-class German-made MARKATOR professional industrial marking station (dot peen marking station). This complete machine system represents the highest level of durable and precision factory marking technology for metal and plastic components. A special feature of the equipment is the integrated rotary unit (chuck / rotary table) and the enclosed safety cabin. Thanks to this design, the machine is suitable not only for marking flat surfaces, but also for automatic circumferential and peripheral marking and serial numbering of cylindrical parts, shafts, discs, pipe fittings, and gears. The dot peen (micro-percussion) marking technology provides extremely durable marking without weakening the material structure.

Condition: ready for operation (used), Year of construction: 2016, laser power: 200 W, Laser engraving machine manufactured in 2016. This Trotec SP500 C200 features a powerful 200W CO2 laser source and a generous working area of 1240 × 710 mm. With only 1,550 working hours, it remains in excellent condition and has been used solely for paper and cardboard cutting. If you are looking to get high-quality laser cutting and engraving capabilities, consider the Trotec SP500 C200 machine we have for sale. Contact us for further details. • Laser source: 200 W CO2 • Working area: 1240 × 710 mm • Working hours: 1,550 h • Condition: Excellent/mint • Ownership/usage: Single owner; used only for paper and cardboard • Integrated equipment/options: • JobControl Vision camera system • Autofocus system (high-precision electro-optical) • Laser pointer • Electronically controlled Z-axis • Air-assist with integrated compressor • Dust Protection Pack Technology • JobControl Expert software • Pass-through system • Tables: Honeycomb table; Slat cutting table; White acrylic + aluminum table • Optics: 2.0" precision lens + additional optics package (2.0", 2.5", 5.0") • Gas kit • Commercial info: • Machine under power; available for inspection and cutting tests • Location: Modena, Italy • Note: 24 months warranty originally included Additional equipment Gujdozarzrepfx Ahvec • Industrial water chiller • Professional mobile fume extraction system • H13 washable filter cartridges • Additional spare filter cartridge • Pneumatic pulse-cleaning system • 1.5 HP extraction fan motor • Double activated carbon filtration cell • Full package sale includes: Laser machine + chiller + professional fume extractor

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Gujdpfxszaq Ike Ahvjc Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Gsdpfx Ahozaqk Sevsuc TECHNICAL DETAILS Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: S4-1913, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 952 mm, total height: 1,073 mm, total length: 1,428 mm, working range: 1,016 mm, overall weight: 295 kg, table length: 1,016 mm, table width: 610 mm, input frequency: 50 Hz, We are selling our Trotec Speedy 400 CO2 laser machine from 2018 due to a reduction in our operational capacity. The machine features the following equipment: • 120-watt CO2 laser (air-cooled) • Autofocus and auxiliary air blower • Vision camera for precise positioning • Integrated compressor • Cutting table included • Connection cable • Ruby software can be downloaded free of charge from the manufacturer's website Gusdpfx Ahsy Tqanevec The unit was completely inspected and its proper functioning confirmed by Trotec's technical service manager in December 2025. In addition, the laser source was renewed in 2025. If you have any questions or require further information, please do not hesitate to send us a message or call us. This is a commercial sale. All prices quoted are final prices (including statutory VAT). The VAT will be shown separately on the invoice.

Condition: ready for operation (used), Year of construction: 2018, laser power: 10 W, Laser engraving machine manufactured in 2018. This VIDEOJET VJ 7230 features a laser wavelength of 1064 nm and operates on a voltage range of 100 – 240 V. It includes an external touchscreen interface housed in stainless steel and comes with a Bofa Ad Oracle extraction system. If you are looking to get high-quality engraving capabilities, consider the VIDEOJET VJ 7230 machine we have for sale. Contact us for further details. Guedpoy Snqnofx Ahvsc - Units Available: 2- Laser Type: Laser Engraving System- Wavelength (WL): 1064 nm- Voltage: 100 – 240 V ~- Amperage: 0.9 – 1.7 A- Frequency: 50/60 Hz- Phase: 1 PH- Laser Class: Class 4 (Complies with 21 CFR 1040.10 and 1040.11)- Standards: CE, EAC, TÜV SÜD NRTL C/US- Included Accessories: Bofa Ad Oracle extraction system (Videojet branded)- Controller: External touchscreen interface in stainless steel housing

Condition: ready for operation (used), Year of construction: 2021, laser power: 10 W, Laser engraving machine manufactured in 2021. This VIDEOJET 7230 features a wavelength of 1064 nm and operates on a voltage range of 100 - 240 V. It includes essential components such as a laser head, laser source, and a touchscreen control panel. If you are looking to get high-quality laser engraving capabilities, consider the VIDEOJET 7230 machine we have for sale. Contact us for further details. Guedpfx Aey Snn Tehvjc - Identity: Laser Engraving System- Wavelength (WL): 1064 nm- Voltage: 100 - 240 V ~- Amperage: 0.9 - 1.7 A- Frequency: 50/60 Hz- Phase: 1 PH - Laser Class: Class 4- Compliance: 21 CFR 1040.10, 1040.11, IEC/EN 60825-1:2014- Included Components: Laser head, Laser source, Touchscreen control panel, Videojet Bofa Ad Oracle extraction system

Condition: ready for operation (used), Year of construction: 2021, operating hours: 17 h, laser power: 100 W, This 3-axis Trotec Rayjet R400 was manufactured in 2021. It features a powerful 100 W DC CO2 laser source and a generous working area of 1030 x 630 mm. The machine is equipped with an air assist system, LED lighting, and a control panel for precise laser positioning. If you are looking to get high-quality laser engraving capabilities, consider the Trotec Rayjet R400 laser engraving machine we have for sale. Contact us for further details. • Laser source: 100 W DC CO2, water-cooled Gujdoy N Tnyspfx Ahvsc • Working area: 1030 x 630 mm • X travel: 1030 mm • Electronic Z-axis • 2.0" focusing lens • Air-cooled optics • Air assist system with internal air distribution • Nozzle diameter: 7 mm (0.27") • Red pointer laser indicator • Control panel for laser positioning • LED lighting • Safety switch • Software: RayJet Manager printer driver and RayJet Manager software Additional equipment • CW-5200 water chiller • Aluminum cutting grid table • Exhaust system without filtration – 1800 m³/h • External air assist pump

Condition: as good as new (ex-display), functionality: fully functional, Compact and quiet CO2 laser with a maximum marking area of 460 x 305 mm (L x W) and a maximum object height of 145 mm. Possible applications: For laser engraving and laser cutting of plastics, wood, glass, and other organic materials, as well as coated surfaces. Engrave glass, create plastic signs, cut, mark, and define fold lines on paper. High-quality workmanship: The laser engraver consists of a one-piece aluminum housing and includes professional CAD/CAM software and an RF laser source. Efficient and safe operation: The space-saving laser is equipped with an automatic scanning function, autofocus for automatic vertical adjustment, an integrated control panel, and an illuminated marking table with a wide front-loading door. In addition, an air compressor for clean lenses and an extraction system are integrated. Laser parameters can be stored in a library. Multi-technology software: for the central collection of settings, designs, and results in a working environment. Equipped with a point-and-shoot function for easy positioning and job setup, as well as a print-and-cut function for cutting printed materials. Dimensions: 775 x 725 x 450 mm Marking area: 460 x 305 mm Maximum object height: 145 mm Gusdpfx Ajy Ia Dxshvec Maximum speed: 2,540 mm/s Laser source: CO2 Power: 40 W Software: Gravostyle software (not included)

Condition: used, Engraving machine with computer system Sign Pro 98 Transport and loading can be organised throughout Europe upon request and for an additional fee. Prices are exclusive of VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS AND MORE. Are you looking for a high-quality but affordable machine for your production? Or do you want to sell your machine? Gsdpoy H H Eyofx Ahvjuc For more information or to contact us, please use the contact form.

Condition: ready for operation (used), Year of construction: 2014, laser power: 20 W, Laser marking machine manufactured in 2014. This Trotec Speedmarker 300 features a nominal power of 60W and includes a rotary attachment for enhanced versatility. The workstation is designed with an enclosed Class 2 safety housing, ensuring operator safety while providing visibility. If you are looking to get high-quality laser marking capabilities, consider the Trotec Speedmarker 300 machine we have for sale. Contact us for further details. • Input power: 100–250 VAC, 50/60 Hz Gusdpfey Htbusx Ahvec • Nominal power: 60 W • Standards: EN 60825-1 (2007) • Controls: External rack-mounted control unit with emergency stop, key switch, and status indicators • Workstation: Enclosed Class 2 safety housing with viewing window and manual lift door Additional equipment • Rotary attachment (Model IUX 65/3-M2) • 3-jaw rotary chuck with additional jaw sets • Rotary max speed: 3000/min (Nmax)

Condition: used, Year of construction: 2015, functionality: unexamined, input voltage: 230 V, type of input current: AC, laser power: 20 W, door opening width: 800 mm, scan area length: 1,000 mm, scan area width: 450 mm, input current: 16 A, laser wavelength: 1,050 nm, working height: 303 mm, input frequency: 50 Hz, working width: 1,000 mm, We are offering this used Trotec Speedmarker 1300 20 Watt/SM1300 SZ SX SY industrial laser marking machine, year of manufacture 2015. Serial number: M13F-0102 Model designation: SM1300 SZ SX SY Date of manufacture: February 2015 Number of phases: 1~ Gusdpfx Aey Ecn Iohvec Voltage: 230 V AC Current: 16 A Frequency: 50/60 Hz Rated power: 1500 W Laser crystal: Yb Laser power: 20 W Laser wavelength: 1050–1090 nm Wiring diagram no.: Speedmarker FL 10-50W Laser diode power: < 0.5 mW Laser diode operating mode: cw Laser diode wavelength: 635 nm Trotec Speedmarker 1300 20 Watt Fiber, year 2015 FEATURES - 20 Watt fiber laser - Pilot laser & Focus Finder Laser - SpeedMark laser software - Industrial PC - Software-controlled X, Y, and Z axes - Working area: 1000 mm x 450 mm - Maximum part height: 303 mm (with f = 254 mm lens) - Heavy-duty worktable with T-slot plate - Illuminated working area - RGV rotary axis for round parts Preparation for extraction system (extraction not included in the sale). We also have 2 smaller Trotec models available for sale: Trotec Laser Work Station 20 Watt Laser, year 2010, with rotary axis If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 142521/1200, working range: 300 mm, travel distance X-axis: 305 mm, travel distance Y-axis: 210 mm, Gravostyle 7 including original dongle (activated) The machine is in good, well-maintained condition and is fully operational. It has been used reliably and serviced regularly. The IS400 is a professional engraving machine and is ideal for engravings in metal, plastic, signage, and many other materials. Collection only Payment by cash or advance bank transfer Sale is made without warranty. The machine is sold as inspected and tested. Gusdpjyx U Dnjfx Ahvjc

Condition: used, Year of construction: 2004, functionality: limited functionality, type of input current: AC, spindle speed (max.): 60,000 rpm, We are selling an engraving machine with custom design and components from Fanuc. Gedpfx Ahsyxp A Sevsuc

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Guedpfx Ahjywg Sbovsc - Weight: approx. 100 Kg

Condition: used, Engraving machine including templates Gsdpfxjywd I Hs Ahveuc