Åkeberg Skoglunn Pølsemakeri As

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer Ijdpjzd Twnofx Anwoau useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. Ijdpozd Twhjfx Anwjau The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm Ijdpszd Tv Refx Anwsau infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, electrically heated 132 kW frying length 3.000 mm belt width 900 mm dimensions: (L x W x H): ± 5.700 x 1.700 x 2.800 mm mecanical lid oil level control oil circulation pump filter sediment removal system Iedpfx Ajzd Tv Dsnweau

Condition: new, new ! all stainless steel Iedpezd Tvwsfx Anwsau 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm + Loader for eurobins

Condition: ready for operation (used), functionality: fully functional, The FAM TS-10 is an industrial-grade stainless steel slicer specifically designed for cross-cutting vegetables, fruits, and other food products. Adapted for high-volume production environments, it ensures smooth, consistent, and high-quality cutting, guaranteeing product uniformity and freshness. Its high-speed cutting wheel, equipped with angled blades, provides clean slices while preserving the product's structure and shelf life. Iaedpezd Sk Tsfx Anwju Versatile, the FAM TS-10 offers various cutting options: smooth slices, corrugated slices, julienne, half-moons, or even wedges, thanks to its interchangeable accessories. This flexibility makes it an ideal solution for a wide variety of products: carrots, leeks, lettuce, potatoes, cucumbers, fresh fruits, and vegetables. Its stainless steel construction guarantees perfect hygiene and simplified maintenance. The articulated hopper and removable covers facilitate cleaning and reduce downtime. With a capacity of up to 3,000 kg/h, the FAM TS-10 is a reliable, robust, and high-performance machine for optimizing your production lines. Do not hesitate to contact us for a quote or a technical demonstration of this essential machine. Technical specifications: Brand: FAM Model: TS-10 (TS-1D) Year: 1999 Dimensions: 3050 x 800 x 1600 mm Weight: 350 kg Power supply: 380 V – 50 Hz – three-phase Installed power: 3.5 kW Capacity: up to 3,000 kg/h Cutting sizes: 1.6 to 40 mm

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20221015FX-350ZM, total length: 1,480 mm, total width: 980 mm, total height: 800 mm, overall weight: 500 kg, input voltage: 400 V, type of input current: three-phase, tank capacity: 350 l, We offer a meat cubing machine with a capacity of 300–500 kg/h. The machine is new and has only been used for testing, approximately 1 hour. Cutting range: cube size: from 5 mm to 30 mm Isdpjzd Sgzjfx Anwoau also capable of cutting frozen vegetables currently installed blades: 5 mm The machine is in perfect working order and ready for immediate use. Ideal for meat processing plants, catering services, and frozen vegetable production.

Condition: used, The Treif Puma CE-F is a professional industrial meat slicing machine designed for high-volume meat processing operations. With a cutting performance of up to 400 cuts per minute, it delivers fast, accurate, and consistent portioning of various meat products. The machine is suitable for processing fresh, chilled, and slightly frozen products down to -4°C. Its robust construction and powerful drive system ensure reliable operation, high productivity, and excellent cutting precision. Iodpfx Anozd E Swjwjau Technical Specifications: Manufacturer: Treif Model: Puma CE-F Type: Industrial Meat Slicer Cutting Capacity: Up to 400 cuts per minute Product Temperature: Down to -4°C Power Supply: 230/400 V, 50 Hz, 3 Phase Power Rating: 3.4 kW Current Consumption: 16 A Chamber Dimensions: 235 x 220 mm Machine Dimensions: 1870 x 880 x 1450 mm Weight: 285 kg Application: Slicing and portioning meat, steaks, chops, pork belly, and other food product

Condition: used, The Alexanderwerk SKN 65 SS is a professional industrial bowl cutter designed for chopping, mixing, and emulsifying meat and other food products. Its 65-liter bowl and six-knife cutting system ensure efficient processing and consistent product quality. Equipped with two knife speeds, the machine offers flexibility for various production requirements. Built entirely from stainless steel, it provides durability, easy cleaning, and excellent hygiene standards. Technical Specifications: Manufacturer: Alexanderwerk Model: SKN 65 SS Type: Bowl Cutter Bowl Capacity: 65 l Number of Knives: 6 Knife Speeds: 1500 / 3000 rpm Number of Speed Settings: 2 Bowl Material: Stainless Steel Construction Material: Stainless Steel Iaedpfx Ajzd E Hujnweu Power Supply: 400 V / 50 Hz / 3N Dimensions: 1400 x 900 x 1350 mm Application: Meat processing, sausage production, pâtés, fillings, and various food products

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3 Iasdpezd Dxvjfx Anweu

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform Iaedpfx Aszdy Duenwsu The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, Potato specialties oven suitable for thermal oil heating infeed height: ± 1.000 mm Iaedpfx Anjzdy Dnewou outfeed height: ± 1.000 mm suitable for fire protection with seperate infeed belt oil circulation system net belt length: ± 9.000 mm net belt width: ± 650 mm adjustable speed lifting unit dimensions (l x w x h): ± 12.720 x 1.625 x 3.455 mm steam connection heated drip tray 0.5 - max 3 bar. oil level check VEGA central air extraction with telescopic chimney Infeed belt Type TB-D 2100-6.5 Dimensions: 2,100 x 650 mm 0.37 kW/1.1A External tubes heat exchanger “Van de Walle Apparatenbouw” Type Florigo WW050 BT Year of manufacture 08/2013 500 kW Type Van de Walle D323-V012-2000 Casing: Working pressure 6 bar / 290°C / 85L Tube: Working pressure 6 bar / 220 °C / 94L Test pressure 9 bar Drum filter Type FT750-3 Drum dia. 750 mm Drum dia. 300 mm 0.37 kW Drum 1.1 A screw 0.12 kW / 0.41 A Capacity 94 m³/h Blower 0.25 kW / 0.8 A Fryer Product belt 0.75 kW / 1.9 A Fryer top belt 0.75 kW / 1.9 A Lifting device 1.1 kW / 2.6 A Drum filter / Waste screw 0.12 kW / 0.41 A Fryer main pump 15 kW / 29.3 A Fryer auxiliary pump 0.55 kW / 1.5 A Fryer drip tray pump 0.55 kW / 1.5 A

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) Iodpfxozdy Dhs Anwoau electrical power : 9,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.150 mm capacity : ± 2.500 kg / h for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 Iedpfozdy Dbjx Anwoau power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed Iaedpfozdy A Dox Anweu oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, VEMAG HP 3 | Vacuum Filler Manufacturer: VEMAG Maschinenbau GmbH Model/Type: HP 3 Serial number: 170 0068 Year of manufacture: 2013 Power supply: 3-phase, 400 - 466 V, 50/60 Hz Rated current: 7 A Power: 4.5 kW Short-circuit current rating (SCCR): 5 kA rms Electrical diagram (E-Diagram): 170 890 002e The VEMAG HP 3 industrial vacuum filler is an advanced device designed for continuous and precise filling and portioning of various types of products. This machine, manufactured by the renowned German leader in the meat processing machinery industry – VEMAG – is ideally suited for use in medium-sized and large meat processing plants (butcher shops, sausage factories), as well as in the delicatessen, bakery, and catering sectors that produce on a large scale. Iaedpfszdviaex Anwsu The core of the device is a proven, dual auger system that guarantees extremely gentle handling of the raw material. As a result, the structure of the product (e.g., meat filling, liquid or semi-liquid masses) is not damaged, which directly translates into an ideal cross-section and consistent quality of the final product. The vacuum technology effectively eliminates air bubbles from the mass, ensuring better binding, color stability, and longer shelf life of the finished product.

Condition: refurbished (used), Poly Clip FCA 120 Iasdpfxjzdr Nis Anwsu

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Iajdpfezdrufox Anweu

Condition: used, Stephan MCH 30 Microcutter This multifunctional stainless steel continuous cutter is an indispensable emulsifying machine for the meat, dairy, cheese, vegetable, fruit, plant-based, pet food, and baby food industries. In addition to producing very fine emulsions, it can also process products containing coarser particles in a single operation. Operating at high speed, this continuous cutter processes large volumes of product into a homogeneous mass while simultaneously ensuring efficient mixing of ingredients. The settings can be adjusted to produce textures ranging from coarse cuts to fine emulsions. The machine is equipped with a large feed hopper positioned at a convenient working height, allowing easy product loading, including direct feeding from a bowl cutter. It is ideal for processing cheese, fish, game, poultry, dough products, vegetables, fruit, meat, and other food products. This emulsifier is entirely manufactured from stainless steel and is mounted on wheels for easy mobility. Iaodpfx Aszdq Ahsnwju Specifications: - Production capacity: up to 4,500 kg/h (depending on product type, cut size, and feed rate) - Hopper capacity: 170 L - Hopper infeed height: 810 mm - Supplied cutting size: 0.7 mm - Voltage: 400 V (3+N, 50 Hz) - Power: 30 kW - Weight: 510 kg - Machine dimensions (W × D × H): 1,750 × 1,030 × 810 mm - Construction: Fully stainless steel construction. - Mobility: Mobile unit on wheels.

Condition: ready for operation (used), functionality: fully functional, The ANKO HSM-600 forming machine is an industrial machine specifically developed for the automated production of shumai, siomai, and other dim sum-type specialties. Thanks to its fully automated system, it successively performs the dough forming, filling dispensing, and shaping of the finished product, while ensuring consistent quality and excellent production uniformity. This ANKO machine enables food processing companies, central kitchens, and Asian food manufacturers to meet growing demand while reducing labor costs. Indeed, the HSM-600 operates with a double production line to increase output without compromising the quality of the final product. Furthermore, the dough thickness and filling weight can be adjusted according to the desired recipes. Iaodpfezdqx Nex Anweu In addition, this forming machine accepts various types of fillings, such as minced pork, beef, shrimp, fish, or various vegetable preparations. Its food-grade stainless steel construction facilitates cleaning and maintenance operations, which is a major advantage in environments with high hygiene requirements. The HSM-600 therefore represents an efficient solution for companies wishing to industrialize the production of shumai while maintaining an appearance similar to manual production. Thanks to its high output and excellent dispensing accuracy, it integrates perfectly into production workshops intended for the French, European, and international markets. Technical specifications: Type: Automatic double-line forming machine for Shumai Dimensions: 1,450 × 1,100 × 2,200 mm Weight: 750 kg Power supply: 220 V, 380 V or 415 V – three-phase Frequency: 50 or 60 Hz Production capacity: 5,000 to 6,000 pieces/hour Product weight: 14 to 24 g/piece Product diameter: 25 to 35 mm Product height: 25 to 30 mm Dough thickness: 0.3 to 0.5 mm Dough strip width: 60 to 70 mm

Condition: ready for operation (used), functionality: fully functional, The ANKO HLT-700XL forming machine is a multi-functional industrial machine designed to automate the production of various filled products, such as ravioli, samosas, dumplings, gyozas, empanadas, ravioles, har gow, and other food specialties. Recognized worldwide in the food industry, it allows manufacturers to increase their production capacity while ensuring consistent product quality. Thanks to its automated dosing and forming system, the HLT-700XL ensures excellent consistency in weight, shape, and filling. The amounts of dough and filling are adjustable to meet the specific needs of each recipe. As a result, raw material waste is reduced while productivity increases. Furthermore, the quick mold change allows for the production of multiple types of products with a single machine. This forming machine is particularly popular among manufacturers of frozen foods, central kitchens, and Asian food producers. In addition, its high production capacity makes it suitable for meeting the requirements of modern industrial lines. Moreover, its compact size facilitates its integration into existing workshops without requiring significant modifications to the layout. Finally, the ANKO HLT-700XL forming machine provides a strategic solution for automating production while ensuring consistent and repeatable quality. As a reconditioned machine, it also significantly reduces investment costs compared to a new machine. Technical specifications: Serial number: 201136 Date of manufacture: 11/2019 Power supply: 380 V Frequency: 50 Hz Number of phases: 3 PH Power: 4 kW Production capacity: 2,000 to 10,000 pieces/hour, depending on the product Filling hopper capacity: 35 L Machine weight: 450 kg Iedpfx Anszdqkxewsau Manufacturer's dimensions (L × W × H): 1150 × 570 × 1700 mm Unit product weight: 2 to 200 g, depending on the configuration Products that can be produced: ravioli, dumplings, gyozas, samosas, empanadas, ravioles, har gow, and similar filled products.

Condition: used, Stephan MCH D 180 Microcutter This high-performance continuous microcutter from Stephan is a versatile emulsifying machine widely used in the food industry. It is ideally suited for the meat, pet food, baby food, convenience food, plant-based (vegan), vegetable, and fruit processing industries. The continuous cutter processes large quantities of product at high speed into a homogeneous mass while simultaneously ensuring effective mixing of ingredients. The cutting size can be adjusted using interchangeable cutting rings, allowing the production of both fine and coarse emulsions. This microcutter is equipped with a large 200-liter feed hopper positioned at a convenient working height, enabling direct product transfer from a bowl cutter. The emulsifier is mounted on wheels for easy mobility within the production area. The machine is constructed entirely from stainless steel. Specifications: - Production capacity: Up to 6,000 kg/h (depending on product type, particle size, and feed rate) - Hopper capacity: 200 L - Equipped with a double cutting system - Supplied with cutting rings: 0.7 mm and 0.5 mm - Hopper infeed height: 910 mm - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 75 kW - Weight: 977 kg Iodpfx Aszdqi Ujnwsau - Year of manufacture: 2007 Machine Dimensions (W × D × H): 2220 × 1120 × 1060 mm

Condition: used, CFS GEA Koppens WTC 400 Battering Machine This 400 mm wet coating (battering) machine from CFS is ideal for coating meat, fish, game, poultry, fruit, and vegetables. The machine is designed for in-line installation and is particularly suitable for battering convenience food products. The coater is mobile and height-adjustable, allowing for flexible integration into production lines. It features a continuously variable conveyor speed for optimal process control. Excess batter is removed by means of an air knife system, which blows off surplus coating from both the top and bottom sides of the product. The machine is easy to disassemble, enabling quick and efficient cleaning. It is constructed entirely from stainless steel. Specifications: - Working width: 400 mm - Conveyor speed: Continuously variable - Infeed and discharge height: 1050 mm (adjustable) - Equipped with a stainless steel mesh belt - Mesh size: 5 mm - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 0.62 kW - Weight: 172 kg - Year of manufacture: 2005 Iaedpfx Aezdqd Ssnwou Machine Dimensions (W × D × H): 1350 × 750 × 1750 mm

Condition: ready for operation (used), functionality: fully functional, The ANKO HLT-700XL forming machine is a multi-functional industrial machine designed to automate the production of various filled products such as ravioli, samosas, dumplings, gyozas, empanadas, ravioles, har gow, and other food specialties. Recognized worldwide in the food processing industry, it allows manufacturers to increase their production capacity while ensuring consistent product quality. Thanks to its automated dosing and forming system, the HLT-700XL ensures excellent consistency in weight, shape, and filling. Indeed, the quantities of dough and filling are adjustable to meet the specific needs of each recipe. Consequently, raw material waste is reduced while productivity increases. Furthermore, the quick mold changeover allows for the production of multiple product types with a single machine. This forming machine is particularly appreciated by manufacturers of frozen foods, central kitchens, and Asian food producers. At the same time, its high production capacity allows it to meet the requirements of modern industrial lines. Moreover, its compact size facilitates its integration into existing workshops without requiring significant modifications to the layout. Finally, the ANKO HLT-700XL forming machine is a strategic solution for automating production while ensuring homogeneous and repeatable quality. As a refurbished machine, it also significantly reduces investment costs compared to a new machine. Technical specifications: Serial number: 201136 Date of manufacture: 11/2019 Power supply: 380 V Iaedpfx Aezdqa Tjnwju Frequency: 50 Hz Number of phases: 3 PH Power: 4 kW Production capacity: 2,000 to 10,000 pieces/hour depending on the product Filling hopper capacity: 35 L Machine weight: 450 kg Manufacturer's dimensions (L × W × H): 1150 × 570 × 1700 mm Unit product weight: 2 to 200 g depending on the configuration Products that can be produced: ravioli, dumplings, gyozas, samosas, empanadas, ravioles, har gow, and similar filled products

Condition: used, CFS GEA Koppens 600 H TW Forming Machine This multifunctional hamburger and nugget forming machine is suitable for shaping a wide variety of products. Both round and rectangular shapes can be produced with this former. These machines are widely used across numerous industries, including bakeries, butcheries, convenience foods, snacks, salads, cheese, vegetables, fruit, processed meats, fish, vegan and vegetarian products, baby food, and pet food production. The automatic patty former features a large infeed hopper where the product is pushed into the mold by two pneumatic plungers. The mold is then moved above the conveyor belt, after which a pneumatic ejector presses the formed product out of the mold onto the conveyor. This former is ideal for integration into a production line (in-line operation). The machine is constructed entirely from stainless steel. Specifications: - Production capacity: 30 cycles per minute - Working width: 400 mm Iaedpfx Aszdp Amonweu - Continuously variable speed control - Power supply: 400 V (3-phase + Neutral, 50 Hz) - Power rating: 11.27 kW - Weight: 1,110 kg - Compressed air requirement: 6 bar Machine Dimensions (W × D × H): 3500 × 1300 × 1900 mm