Stratus-pet GmbH

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, screw diameter: 30 mm, injection pressure: 2,500 bar, opening stroke: 500 mm, plate length: 570 mm, TECHNICAL DETAILS Clamping force: 1,000 kN First injection unit Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second injection unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Kjdpfxsxx T Dwj Acuedw Injection pressure: 2,500 bar Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Opening stroke: 500 mm Maximum daylight between platens: 850 mm Mold height: 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT 2 x core pull (simultaneous movement, adjustable holding pressure) Intermediate stop for hydraulic rotary control CF card drive Host computer interface Input device interface Conveyor belt interface Machine prepared for Multilift Selector unit with connection Installation height expanded to 350 mm Highly wear-resistant screws Connection for air blow-off device 2-color / horizontal-vertical injection unit Includes disks/CF cards – complete documentation/manuals

Condition: used, Year of construction: 2000, Injection moulding machine Engel ES 1350/275 HL, year of manufacture 2000 Kdjdpfx Acsxx T Ddjusw

Condition: good (used), Year of construction: 2011, Engel e-motion 3440/420T (2011) Clamping force: 420 t Screw diameter: 80 mm Distance between tie bars V: 920 mm Ksdsxx Sgqepfx Acuedw Distance between tie bars H: 920 mm Shot volume: 1709 cm3 Type: Horizontal Drive: Electric

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,565 mm, overall weight: 22,000 kg, The nearly new used ARBURG Allrounder T offered here, with a clamping force of 2000 kN, features a 2-station rotary table that alternates 180° forward/back. With only 8,344 operating hours, the machine is in excellent condition. Kdsdpfx Acjxx R Iasuew

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1560 mm Measurements depth 5980 mm Measurements height 2190 mm Machine weight 8900 kg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1900 kN Additional Equipment Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Ksdjxx Dy Ajpfx Acujdw Application Types Injection Moulding

Condition: used, Year of construction: 2015, operating hours: 23,000 h, clamping force: 450 kN, screw diameter: 70 mm, clearance between the columns: 810 mm, column diameter: 70 mm, displacement volume: 1,239 cm³, injection pressure: 199 bar, injection weight: 1,127 g, installation height: 850 mm, 4 core pullers; 70 mm bimetallic screw Kjdpfxsxxxa Re Acusdw

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Ksdpfsxxrr Tjx Acusdw Offer for the injection moulding machine only

Condition: used, Year of construction: 2000, 3 x injection moulding machines Ferromatik Kdedpfx Aoxxl Emscujw Ferromatik K155, year of manufacture 1999 Ferromatik K275S, year of manufacture 2000 Ferromatik K200, year of manufacture 2000

Condition: used, Year of construction: 2021, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, load hours: 3,500 h, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Kdodpfx Aoxwy Utocuew delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2004, Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Kodpfxoxwxcij Acuedw Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight: 14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

Condition: used, Year of construction: 2000, 3 x injection moulding machines Ferromatik Ksdoxwwy Tepfx Acujdw Ferromatik K155, year of manufacture 1999 Ferromatik K275S, year of manufacture 2000 Ferromatik K200, year of manufacture 2000

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI Kedpfx Aexwvg Eocuodw type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. robot-system machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Ksdpjxwvdwsfx Acuodw Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm Kdedoxwvdkopfx Acuew screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 8x measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG

Condition: excellent (used), Year of construction: 2007, operating hours: 25,215 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 845 mm, plate width: 820 mm, installation height: 2,100 mm, total length: 5,100 mm, total width: 1,600 mm, total height: 2,100 mm, overall weight: 6,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 950 mm, Equipment: documentation/manual, warehouse no.: 503472 manufacturer: KRAUSS MAFFEI type: KM 160-750 CX controller: MC5 year of construction: 2007 operation hours: 25215 h clamping force: 1600 kN distance between tie-bars h x v: 520 x 520 mm size of mould plates h x v: 820 x 845 mm min. mould height: 300 mm max. open daylight: 950 mm Kdjdpfjxwvbvsx Acuow opening stroke: 650 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine with material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit mould heating 6x measures of machine l x w x h: 5.1m x 1.6m x 2.1m total weight: 6600KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LRX S100-1321 year of construction: 2008 X axis: 550 mm Y axis: 1200 mm Z axis: 2500 mm total weight: 280 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive Kdodpfexwva Ejx Acujw An inspection can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 2008, operating hours: 24,896 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, ejector stroke: 150 mm, plate length: 750 mm, plate width: 750 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 9,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, warehouse no.: 503505 manufacturer: ENGEL type: VICTORY 1050-130 Tech controller: CC200 year of construction: 2008 operation hours: 24896 h clamping force: 1300 kN size of mould plates h x v: 750 x 750 mm Kjdjxwvafjpfx Acujdw min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1650 bar equipment included: screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface EUROMAP 67 interface for ejector plates safety Schuko-socket 10A mould heating 8x measures of machine l x w x h: 5.8m x 1.7m x 2.3m total weight: 9500KG

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Measurements depth 6460 mm Measurements height 2100 mm Kdjdpexwqvnofx Acuew Clamping Unit Clamping force 2200 kN Additional Equipment Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Kdodpfx Aoxwmx Socuew Screw diameter: 40 mm Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: excellent (used), Year of construction: 2000, Demag 150/500-840 Ksdpfx Aexwmxrecuedw Clamping force 150 t PVC cylinder Screw diameter 50 mm Shot weight 400 g Tie bar distance 50x50 cm Year of manufacture 2000

Condition: like new (used), Year of construction: 2021, operating hours: 19,641 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 635 mm, displacement volume: 353 cm³, mold height (min.): 250 mm, opening stroke: 500 mm, total length: 6,660 mm, total width: 2,000 mm, total height: 2,352 mm, overall weight: 18,400 kg, heating capacity: 18.7 kW (25.42 HP), power: 100 kW (135.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 160 A, Equipment: documentation/manual, KM PX 201-1000 200 tonnes Full Electric Like new, 19,000 operating hours Ksdpoxwl Ekefx Acusdw 3 hydraulic core pulls Hydraulic ejector Mold heating: 24 zones Water supply: 16 zones Injection unit heating: 6 zones Screw diameter: D-50mm

Condition: used, Year of construction: 2002, Injection moulding machine Battenfeld HM 1000/1440, year 2002. Screw from Battenfeld: 135 mm. The machine is equipped with a single-cavity shut-off nozzle for the mould, as well as a shut-off in the injection unit. The Battenfeld currently has 87,545 operating hours. The machine is still in production. Kdodpoxwlmnefx Acuow

Condition: excellent (used), Year of construction: 2007, operating hours: 49,406 h, clamping force: 3,000 kN, screw diameter: 70 mm, clearance between the columns: 720 mm, displacement volume: 904 cm³, injection pressure: 1,470 bar, injection weight: 826 g, mold height (min.): 400 mm, Arburg 720S-3000-1300 injection molding machine (251) Number: 251 Availability: in stock Year of production: 2007 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 70 Injection weight [g]: 826 Injection pressure [bar]: 1470 Closing force [kN]: 3000 Column spacing [mm]: 720×720 Plate size [mm]: 1040×1040 Kjdexwcf Iopfx Acujdw Control type: Selogica Tongue: german Installed power [kW]: 60 Working hours [h]: 49406 Weight [kg]: 16850 Dimensions [mm]: 7.3×2.2 Feed hopper: NO Robot socket: Yes Control of heating for molds: 6 Core string: 2

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from mold maker: ARBURG 420 C 1000-250 VARIO – Injection unit horizontally movable Year 2001, 43,600 operating hours, single owner, excellent condition, offered with the following specification: 35 mm screw, Tech Level 2 servo-controlled clamping unit, cooling circuits controlled via program, 1 core pull, equipment packages 1, 2, 3, 5, 6, very well-maintained machine, available for inspection under power. Without peripherals. Dryer, conveyor, color mixer, hopper by MOTAN available at extra cost if required. * Further machine: ARBURG 320 C 600-100 Year 2005, only 36,500 operating hours, single owner, excellent condition, offered with the following specification: 25 mm screw, second screw 30 mm, set-up for parting line injection, Tech Level 2 servo-controlled clamping unit, cooling circuits controlled via program, Kdodpfxexwa A Ds Acuow 1 core pull, equipment packages 1, 2, 3, 5, 6, very well-maintained machine, available for inspection under power. Without peripherals. Dryer, conveyor, hopper by DIGICOLOR and sprue picker by GEIGER MiniServo available at extra cost if required.

Condition: like new (used), Year of construction: 2022, Arburg 570A 2000-400/70 (2022) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Kdjdpjxv Sv Tsfx Acuew Distance between tie bars H: 570 mm Shot volume: 154 cm3 Type: Multicomponent Drive: Electric