HMV Herzog Maschinen Vertrieb

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Iisdpfsz Diqbjx Aqcog Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. Iedpfx Aqsz Dbyhocoig - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. Ijdpfx Asz Dbtzeqceig The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 427-13, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, total height: 3,000 mm, total length: 4,000 mm, total width: 3,050 mm, overall weight: 6,700 kg, spindle speed (max.): 10,500 rpm, spindle mount: MK 4, Equipment: 3rd hydraulic function, documentation/manual, The main spindle was replaced approximately 700 hours ago! The machine can be tested on site. EQUIPMENT: Coolant system and internal cooling Chip conveyor Hydraulic unit Travel in X-axis: 2,000 mm Travel in Y-axis: 400 mm Travel in Z-axis: 425 mm Table length: 2,280 mm Table width: 450 mm Spindle speed: 10,500 rpm Number of tools: 20 Iodpoz A U Rwofx Aqcoig Control system: SIEMENS SINUMERIK 810 M

Condition: good (used), Year of construction: 2007, Haas Minimill Year: 2007 Tool changer: 10 positions BT 40 taper Spindle speed: 10,000 RPM Iisdpfxjz A Agge Aqcjg USB Coolant system Video available!

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Isdpfxoz Ar Ezj Aqcoig Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Horizontal machining center MAZAK Model: VARIAXIS 630-5X, complete with PALLETECH system with 12 pallets + 2 loading/unloading stations Year: 2003 Table size: 500 x 500 X-axis travel: 630 mm Y-axis travel: 765 mm Z-axis travel: 560 mm Spindle connection: ISO 40 Spindle speed (main spindle): 12,000 rpm Number of tools (ATC magazine): 120 Spindle power: 26 Kw High-pressure system through the spindle: 18 BAR Chip conveyor with belt Control unit: Mazatrol 640M Maximum load on the table: 500 Kg Weight (machine dimensions): 25,000 Kg Iijdpfx Ajz Apg Aeqceg Renishaw radio probing system

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DMU 40 evo was manufactured in 2013. It features a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 60 tools. The working area measures 400 x 400 x 375 mm, providing ample space for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 evo vertical machining centre we have for sale. Contact us for further details. • Tool taper: HSK 63 • B-Axis: Yes • C-Axis: Yes • Does the machine have CTS? YES • Is a chip conveyor included? YES • Tool magazine capacity: 60 tools • Machine works on a knuckle style table Iiodpfx Aqjz Aki Ssceg • Machine is fully assembled • Machine is currently in storage and cannot be powered on due to its location • Approx. GBP 15,000 recently invested in repairs/service • Two drives have been removed and require refurbishment: Main Heidenhain power drive and X-axis drive • The drives can be reinstalled through the rear electrical cabinet • Reinstallation is relatively straightforward and mainly requires reconnecting the electrical connectors • Machine is currently not operational until the two drives are refurbished and reinstalled

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Iijdpfx Aqjz Ahxqjcog Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Iiedpszz S R Ujfx Aqceg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW Used, sold without warranty Transport dimensions: approx. L 2.0 m x W 2.4 m x H 2.5 m Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Iiodpfx Aezz S N Reqcsg Subject to technical changes, errors, and prior sale!

Condition: like new (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, number of slots in tool magazine: 21, Equipment: chip conveyor, Fanuc vertical machining center Model: Robodrill α-D21LiB5 Year: 2016 Table size: 850 x 410 mm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Tool magazine capacity: 21 Control unit: Fanuc 31i model b5 Spindle speed (main spindle): 100-10000 rpm Iijdszz R Ekspfx Aqceg Spindle taper: BBT30 Spindle power: 11 kW High-pressure coolant system through the spindle: 15 bar Chip conveyor (belt type) Air blow through the spindle for dry machining 4-axis continuous table Maximum workpiece weight (spindle): 300 kg

Condition: good (used), Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, number of slots in tool magazine: 60, Equipment: documentation/manual, 5-axis machining center MAZAK VARIAXIS I 500 with pallet changer Year: 2006 Numerical control: Mazatrol Matrix Controlled axes: 5 continuous axes X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 460 mm A-axis: -120° / +30° C-axis: 360° Table size: 500 x 400 mm x 2 Maximum load on the table: 300 kg Distance from spindle nose to horizontal table: 190 - 650 mm Distance from spindle nose to vertical table: 140 - 600 mm Iodpfx Aqszz R Acecjig Maximum spindle speed: 12,000 rpm Spindle power: 22 kW Tool magazine capacity (automatic tool changer): 60 Chip conveyor

Condition: used, 20-position tool changer Operating hours: approx. 5,886 hours Footprint: approx. 1700 x 2500 x 2700 mm Iodpfx Ajzz Hqvoqcsig

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Iodezz Hnuopfx Aqcoig Table load capacity: 1,000 kg T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 550 x 440 x 580mm, B axis -125/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum diameter 350mm, Iiodpfx Aqozzzgxocog maximum workpiece height 300mm, maximum workpiece weight 60Kgs number of pallets 2, spindle taper BT40, 60 Station ATC, spindle speed 15,000rpm, Fanuc G-Tech 31iB control, through spindle coolant

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm Iodpezzx H Asfx Aqcjig MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Iisdpozzxk Uefx Aqceg Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details. • Outer length: 500 mm • Outer width: 400 mm Ijdpfx Aozzwnfoqceig • Table load: 300 kg • Max distance between vertical spindle and table: 140 - 600 mm • Number of tool slots: 60 positions • Chip conveyor: Belt type (with chip pan preparation) • Cooling pressure: 15 kg • Controlled Axes: 5 continuous • Table Dimensions: 500 x 400 mm (x 2 pallets) • Distance Spindle Nose to Horizontal Table: 190 - 650 mm • Spindle Torque: 252 Nm (186 ) • Operating Hours (Power On): 57,979 hrs 58 min 25 sec • Operating Hours (Auto Cut): 31,273 hrs 09 min 14 sec • Operating Hours (Cutting Time): 27,810 hrs 53 min 42 sec • Total Time: 57,979 hrs 58 min 24 sec • Installed Software Options: Auto Pecking Cycle with Load Detection, Synchronized Tapping, EIA Dynamic Compensation 2, Additional M-Code Function (2 M-Codes), G00 Slope Constant, Mazacc-3D High-Speed Software Package, Shape Compensation for Rotary Axes, Tilted Working Plane, Simultaneous 5 Axis Control • Visual Observations: Internal chamber shows normal surface wear and minor coolant staining on enclosure walls, no visible major mechanical damage

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter Iisdpjzzmmwefx Aqcog x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg Iijdpfozzax Tex Aqcog SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: used, functionality: limited functionality, The following are offered: OPS 650 (5-axis): Tool changer with 40 positions for HSK E40 OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot stations for the Erowa clamping system: 70 positions (workpiece changer) Robot stations for pallet changing: 8 positions The robot is currently not in operation due to a malfunction. However, this can be repaired so that it functions normally again. Iiodpfxezzavrj Aqceg The cooling unit for the 650 machine is external.

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Iodpfx Aszy Ukbjqcoig Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: used, Year of construction: 2000, x-travel 500 mm Iisdezy Sibjpfx Aqceg y-travel 400 mm z-travel 400 mm Control Heidenhain spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 16 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Coolant unit X-axis travel / X-axis stroke: 550 mm Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm Iodszyyqyepfx Aqcjig If you have any questions or require further information, please send a message or contact us by phone.