AES Moldes, Lda

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: Djdpfx Akszcdwwstjkn x 600 mm y 400 mm z 310 mm Includes cooler Machine is in excellent condition.

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and Dkodpfx Akozcdtxeten

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading Djdpfx Aozcap Aoktskn With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Generator: Technology:ISOPULS-Doppelquellengenerator Dkedpfx Akozbzb Roton Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Wire: Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire : Attention:The displayed Deionisationsfilters are not included in our offer.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Dedpfjzbbmtex Aktjkn Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dedpfozbat Ssx Aktokn

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Dkedpfxjzbamxe Akton Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Dsdpjza U Nlsfx Aktokn Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters Djdey Ulp Tepfx Aktjkn • Deionizers • Wire feed/recovery system

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, CNC Control without coolant device Technische Daten – technical details: Verfahrweg X / travel X 350 mm Dkjdpfxoy S Tp Ae Akten Verfahrweg Y / travel Y 250 mm Verfahrweg Z / travel Z 250 mm Verfahrweg U / travel U +-45 ° Verfahrweg V / travel V +-45 ° max. konischer Schnitt / max. cone cutting +-10 ° Max. Dimensionen des Werkstücks / max. dimensions of the workpiece 820x680x250 mm Tischabmessungen / table size 700x480 mm max. Werkstückgewicht / max. workpiece weight 4100 kg Gewicht ca. / weight ca. 2640 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm Djdey S Tgzspfx Aktokn max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. Dedpfx Asy Snm Njktjkn The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Djdpfx Aey Snbmektskn Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Dedpfxsy Rz Iwo Aktjkn Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Dsdpfx Asy Rxtkjktokn

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Djdpfx Aoy Rxr Hoktokn

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) Dodpey Rrcfjfx Aktjkn • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Dedpfx Aey Nmxxektokn Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Dedsy I Uvcopfx Aktokn Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, Year of construction: 2018, Technical details: Dksdpfey I Ak Iex Aktjn x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Dkodpfxjy Irdks Akton

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM Dedpfxjy Ib Ews Aktekn - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0120, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, type of input current: three-phase, overall weight: 4,400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 13 A, Equipment: documentation/manual, We offer this used AGIE AGIECUT EVOLUTION 3 wire EDM machine, year of manufacture 1998. Dkedpoy Hfa Aefx Akten Serial number: 0120 Machine list: C31001,8 Year of manufacture: 1998 Wiring diagram number: 627232,2 Weight: 4,400 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 9 kVA Rated current: 13.1 A If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, Wire EDM machine Fanuc a-1iB Type A04B Year of manufacture: 2003 Technical data: x = 550 mm y = 370 mm z = 310 mm Machining area approx. 550x400 mm Table load: 1,000 kg Rapid traverse x/y/z: 450-900 mm/min Machine weight: 3.0 t Space requirement (WxDxH) approx. 2.60x2.90x2.2 m electronic handwheel Dkodpfx Aey Hb T Sokton Additional photos available upon request.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Dkjdpfx Aksy Ed E Iotjn Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device