Lin-Tech sp. zo.o.

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 220 280-0324, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 760 mm, controller manufacturer: Heidenhain, table width: 590 mm, table length: 1,270 mm, overall weight: 6,700 kg, Equipment: chip conveyor, CNC vertical machining center ZPS MCFV 1060 NT, year of manufacture 1998, Heidenhain control. Hodpfx Acez A Ugle Ajnt Type MCFV 1060NT P25.01, No. 220 280-0324, weight 6,700 kg. Travel ranges X/Y/Z: 1,016 x 610 x 760 mm, table area 1,270 x 590 mm with 5 T-slots. Equipment: full protective enclosure, chip conveyor with chip trolley, electronic handwheel. Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2016, operating hours: 7,253 h, functionality: unexamined, machine/vehicle number: 108.004.00.0135, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 560 mm, table length: 1,000 mm, table load: 1,350 kg, overall weight: 6,500 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 3-axis vertical machining center Mikron VCE 1000 Pro, manufactured in 2016, with Heidenhain TNC 620 control. Serial number: 108.004.00.0135, connection 3 x 400 V, 32 A, 16 kW, weight 6,500 kg. Operating hours: 7,253 h. Hnedpfx Acjz A Ufuj Aot Travel ranges X/Y/Z: 1,020 x 560 x 600 mm, table area 1,000 x 560 mm, table load 1,350 kg. Equipment: chip conveyor with chip cart, oil mist separator AQF, cooling unit, special rotary feedthrough for air and water. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,778 mm, total width: 2,977 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, product length (max.): 3,635 mm, number of axes: 3, This 3-axis SMEC MCV 5500 was manufactured in 2022. It features an X-axis travel of 1050 mm, Y-axis travel of 550 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the SMEC MCV 5500 vertical machining centre we have for sale. Contact us for further details. Hjdpfx Acoz A Ubpe Ajnt - CNC Control: Siemens SINUMERIK 828D incl. OPERATE and ShopMill- T-Slot Size: 4 x 18H8 mm- T-Slot Distance: 125 mm- Distance Spindle Center to Column: 580 mm- Distance Table to Spindle Nose: 130-650 mm- Ball Screw X-Axis: Ø 40 x 12 mm- Ball Screw Y-Axis: Ø 40 x 12 mm- Ball Screw Z-Axis: Ø 40 x 10 mm- Feed Motor X-Axis: 3 kW- Feed Motor Y-Axis: 3 kW- Feed Motor Z-Axis: 3 kW- Rapid Traverse X/Y/Z: 36/36/30 m/min- Feed Rate X/Y/Z: 1-15,000 mm/min- Spindle Motor: 22 kW (30 min) / 18.5 kW (Cont.)- Max. Spindle Torque: 141 Nm- Spindle Taper: BBT 40- Tool Storage Capacity: 30 positions- Max. Tool Weight: 8 kg- Max. Tool Length: 300 mm- Max. Tool Diameter: Ø 80 mm (Ø 125 mm with adjacent empty pockets)- Tool Change Time: 1.6 s- Chip-to-Chip Time: 5 s- Coolant System Tank Capacity: 365 L- Coolant Flow Rate: 29.1 L/min- Internal Coolant Pressure (IKZ): 20 bar- Hydraulic System Capacity: 3.9 L- Hydraulic System Max. Pressure: 9 bar- Max. Power Requirement: 32 kVA- Voltage: 400 V- Compressed Air Connection: 6 bar- Machine Dimensions (W x D x H): 3635 mm (incl. chip conveyor) x 2977 mm x 2778 mm- Additional Equipment:* Hinge belt side chip conveyor with rollers* Oil skimmer with endless belt* Coolant unit with coolant gun and bed flushing* Spindle oil cooling system* Air gun* DXF Reader* Electronic handwheel* 3-color status signal light* Work area lighting Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2017, operating hours: 11,101 h, functionality: unexamined, machine/vehicle number: 108.004.00.0159, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 560 mm, table length: 1,000 mm, table load: 1,350 kg, overall weight: 6,900 kg, operating hours of spindle: 10,378 h, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 3-axis vertical machining center Mikron VCE 1000 Pro, year of manufacture 2017, Heidenhain TNC 620 control. Serial no. 108.004.00.0159, connection 3 x 400 V, 50 A, 16 kW, weight 6,900 kg. Operating hours 11,101 h, spindle hours 10,378 h. Travel ranges X/Y/Z: 1,020 x 560 x 600 mm, table area 1,000 x 560 mm, table load 1,350 kg. Hnedpfxjz A T Syj Ac Aot Equipment: chip conveyor with chip cart, Renishaw OMI-2, coolant unit Habor HWK-600PTSB3. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1100 mm Travel distance Y :560 mm Travel distance Z: 510 mm Number of axis: 3 milling machine / machining center Control: HEIDENHAIN TNC 620 spindle chuck: SK 40 / ISO 40 spindle revolutions: 12000 rpm Speed range from: 20 U/min Speed range to: 12000 U/min table size X: 1400 mm table size Y: 560 mm max. workpiece weight: 1000 kg tool changer: 30 - time input Power : 13 kW Rapid traverse: 30 m/min spindle cooling chip conveyor control Heidenhain DMG MORI CMX 1100 V Year of manufacture: 2018 3-axis vertical machining center HEIDENHAIN TNC 620 control 12 bar high-pressure coolant system 30-position tool magazine 30 ISO 40 tool holders included Chip conveyor Hjdpfx Aez A Apusc Aont Electronic handwheel Machine is currently under power Demonstration under power possible by appointment

Condition: excellent (used), Year of construction: 2015, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (min.): 14,000 rpm, operating hours of spindle: 14,500 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machining center Deckel Maho DMC 1150V Technical data CNC control: Siemens Ergoline Travel in X-axis mm: 1150 Travel in Y-axis mm: 700 Travel in Z-axis mm: 550 Feed rates m/min: 42 Max. spindle speed rpm: 14000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Measuring probe Infrared tool measurement TT140 Coolant gun Direct measuring system XYZ Operating hours: 26,600 h Spindle operating time: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3600 x 2300 x 2700 Weight kg: 5750 Hjdpez Ayg Tsfx Ac Aont

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Hodpfxsz Aqx Hs Ac Ajnt Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Hodpsz Apdzjfx Ac Aent Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Machine weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, MAZAK Vertical Machining Center VC-NEXUS 510 Year 2002 X-axis travel: 1020 Y-axis travel: 510 Z-axis travel: 510 Control unit: FUSION 640 Spindle speed: 12,000 rpm Coolant pressure: 15 bar Spindle connection: ISO 40 Table width: 550 Table length: 1300 Number of tools (ATC): 30 Hnjdpsz Akrtefx Ac Ast

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Vertical machining center WELE Model CV-1060 Year 2016 Table size 1150 x 600 mm X-axis travel 1020 Y-axis travel 600 Z-axis travel 600 Number of tools (ATC magazine) 24 Maximum spindle speed 10,000 rpm Spindle power KW 7.5 - 11 Spindle connection BT 40 Rapid traverse rate X-axis 36000 Rapid traverse rate Y-axis 36000 Rapid traverse rate Z-axis 36000 High-pressure system through the spindle 15 Bar Hedpfx Acoz Akqpe Ajnt Automatic tool pre-setter Yes, contact type Chip conveyor SCREW CONVEYOR Machine dimensions 3550 x 2200 x 2230 mm Weight 5500 Kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0712-100481, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, controller manufacturer: Okuma, controller model: OSP, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: used Okuma Genos M560R-V milling machine. X/Y/Z: 1050 x 560 x 460 mm, Table: 1300 x 560 mm OSP control system VAT invoice provided. Please contact me for further details. Type: GENOS M560R-V Serial number: 0712-100481 Year of manufacture: 2016 Gross weight: 7500 kg Hodpoz Ahx Refx Ac Aent

Condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale here is a CNC machining center, DMC 1035V, including a Microset UNO tool measuring system, mounting bracket for the SK 40 tool holders, a tool cabinet, and approximately 140 tools and SK 40 tool holders. The machine is well-maintained and clean and has a 30-position tool changer, including a band filter system. The only defect on the machine is that the rotary through-spindle is leaking for the internal coolant supply (IKZ). Furthermore, the milling machine has a DXF converter and an offline programming station. Sold with VAT shown. No returns, no warranty. Hnjdpfx Asz Ahgzjc Ast

Condition: used, Year of construction: 1992, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle tunring speed 20 - 3.200 U/min main drive motor 22 kW quill stroke 100 mm distance spindlenose - table min./max. 138/600 mm Feed ( x / y / z) 3.000 mm/min rapid traverse ( x / y / z ) 60/50/60 m/min total power requirement 27 kW In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Hsdjzz S Rhopfx Ac Aent Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Hnsdpfx Acozzx Hio Aot Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details. Table • Outer length: 1200 mm • Outer width: 540 mm • Full Load Current: 55.31 A Hnjdpfxjzzw Hns Ac Ast • Interrupting Capacity: 5 kA • Short Circuit Withstand: 10 kA • Carousel/disc-type automatic tool changer • 30-position tool magazine loaded with tooling • Top-mounted mist extraction / air filtration unit (POSMA) • Machine status light tower

Condition: good (used), Year of construction: 2000, Hurco BMC 2416 Year of manufacture: 2000 Number of axes: 3 X-axis travel: 610 mm Y-axis travel: 406 mm Z-axis travel: 540 mm Ultimx control system Hsdpfx Aozzqwtec Aont

Condition: good (used), Year of construction: 2023, functionality: fully functional, Brother W-1000 XD1, Year of manufacture 2023 / Commissioned 2024, CNC control system, X/Y travel 1000/500 mm, Z travel 480 mm + column extension of 150 mm, 4-axis NC swivel head Brother T 200 with counter bearing, Spindle speed up to 16,000 rpm, BBT 30 tool holder, High-speed tool changer, 21 positions, Internal coolant pressure 15 bar, Side loading by robot, Twin chip disposal system, Extraction system, 2 x rotary joint, 4 channels, Workpiece clamping pressure 80 - 210 bar, Tool breakage monitoring Renishaw, Robot interface, Part clamping control, Hodpfszzlmcox Ac Aont Robot cell, Fanuc robot, 6 axes - payload 25 kg, Automatic part loading and unloading via a 212-station pallet system.

Condition: used, Year of construction: 2013, x-travel 1020 mm y-travel 610 mm z-travel 610 mm control Heidenhain iTNC530 Hnjdpfx Acozzfb He Ajt

Condition: used, Year of construction: 2015, x-travel 1020 mm y-travel 610 mm z-travel 610 mm control Heidenhain iTNC530 weight of the machine ca. 7390 kg Hjdpfx Aozzfbmsc Aont

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) Hnsdpozzairjfx Ac Ast FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: used, Year of construction: 2017, operating hours: 38,141 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 35 rpm, operating hours of spindle: 8,074 h, coolant supply: 30 bar, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor belt right - Cooling by the spindle 15 bar - Spindle total time 8.074 hours Hnjdpfx Ajzy Nxgsc Aet If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 4,060 mm, total width: 2,450 mm, table width: 600 mm, table length: 1,250 mm, table load: 800 kg, overall weight: 8,800 kg, spindle speed (max.): 18,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, Equipment: documentation/manual, oil mist separator, The machine is in very good condition, with an accuracy of 3/100. The spindle was replaced in 2017. It has had one owner and has undergone regular maintenance. It will be available in the last week of October, and the price includes loading and technical documentation. It features air conditioning for the electrical cabinet and spindle temperature control. Inspection or re-measurement can be arranged upon request. Hnedpfx Ajzy D Hloc Aot

Condition: good (used), Year of construction: 2012, Machining center Eumach TVMC 2000 - 5-axis XYZ: 2000 x 750 x 750 mm A: 360 degrees B: 120 degrees Spindle speed: 14,000 rpm Spindle: SK 40 Hjdpfxezy D Dqj Ac Aont Weight: 22,000 kg

Condition: excellent (used), Year of construction: 2010, Machine type: - Deckel Maho DMC 1035 V ecoline - Year of manufacture: 2010 - Travel ranges: X: 1035mm, Y: 560mm, Z: 510mm Control system: - Siemens 810D / ShopMill control system - Electronic handwheel Spindle: - Tool holder: SK40 - Speed range: max. 10,000 rpm Tool magazine: - Tool changer with 20 magazine positions Table: Hjdpfxozy Ab Uj Ac Asnt - Fixed angular table - Clamping surface: 1200 x 560mm Operating hours: - Machine: 33,847 - Spindle: 11,026 Optional extras: - Chip conveyor - Coolant system: 20 bar - Coolant nozzle for chip flushing Delivery time: - Immediately or by arrangement

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Hsdpezyptdofx Ac Aent Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.