Sperling Werkzeugmaschinen

Condition: used, functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate rolling machine Rsdpeyhdvqsfx Afcop Manufacturer: FERRO Model: CIT - 1 Year of manufacture: 1988 Working range: 2000 x 6 mm Hydraulic swing-out bearing Cone bending device

Condition: new, functionality: fully functional, PRICE on request, great deal! 4-roll plate bending machine Operation: hydraulic Rjdpfoyg Hckex Afcsp Sheet thickness: 30 mm (1.2 in) Sheet width: Max: 1,200 mm (47 in), Min: 500 mm (20 in) 2 pcs. side supports for large diameters

Condition: like new (used), functionality: fully functional, Year of construction: 2013, For sale is an as-new 3-roll bending machine (year of manufacture 2013) with the following specifications: Working area: Working length: 3100 mm Rsdpfxeydn T Ss Afcjp Sheet thickness (max.): 4 mm Max. sheet thickness for pre-bending: 3 mm Min. bending diameter: 255 mm Roller diameter: 170 mm Drive performance: Motor power: 4 kW Dimensions and weights: Dimensions: 4650x820x1130 mm Weight: 3200 kg For cone bending, all bending values must be reduced by 50%!

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- Rodpfx Aox Twiijfcsp - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal Rjdpox Sr Dfefx Afcop - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm Redpfxsx Ir Dws Afcop -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm Rodpox Ewa Ejfx Afcop -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual Rsdpfxjx D Dfvj Afcjp OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: new, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm Rsdpsxytlqofx Afcop – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Redpfxoxxvlke Afcsp

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Rjdpfoxw D Udox Afcep Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Rjdpfxjxrc Dts Afcsp Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm Rjdpfxexn Rrqs Afcsp - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller (top) diameter: 95 mm, – Capacity 1270 x 3 mm – Electrically adjustable rear roller – Digital display – Hardened rollers – Conical bending – Swiveling upper roller – Brake motor – Foot pedal control – Emergency stop Rjdpfxsxiyw Ee Afcop – Documentation – 400 V

Condition: new, Year of construction: 2025, – 4 rollers – Capacity: 1270 x 4.5 mm – Pre-bending capacity: 1270 x 3.5 mm – Hardened rollers – Top roller diameter: 130 mm – Bottom roller diameter: 110 mm – Side roller diameter: 110 mm – Digital display for left roller movement – Digital display for central bottom roller movement – Digital display for right roller movement – Steel construction ST-52 – Documentation Rodpfexdvafjx Afcjp – 400V

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) Rsdpexacfgsfx Afcjp - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine Rsdpfxjxacdps Afcop - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 6.5 mm Rodpoxabkbefx Afcop pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4,5 mm max. plate thickness 4,0 mm anbiegen roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement Rsdpfjxaawgjx Afcjp - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Rjdpfxjxaacvj Afcjp Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 Rjdpjw U U Udsfx Afcsp With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rsdpsw Hpzwjfx Afcsp Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg Rodpfjw Elvhox Afcep - Documentation available: No - CE certificate present: No - Serial number: 1011268 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: Rjdpfx Afsw Dnd Sjcjp • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 5.5 kW Rodpfsw An Uhex Afcsp Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.