Erich Peter Machines-Plants Gmbh

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: up to ∅20 mm (#6) Dodpfxoxl Avvo Acwjcn • Bar presence detector • Multifunction feeding: gripper and feed rollers • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6)

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 2/24, For sale: Mobile forming machine with fifth steering wheel MODUS-HK-104 PLUS Djdpfxoxlp D Ho Acwscn

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 2/24, For sale: mobile forming machine with steerable fifth wheel MODUS-HK-104 PLUS. The machine is new. Dcodpfx Acjxlpwyjwen

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Djdpfx Acexliqgewscn

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Dodpfx Aoxcuviscwscn Drive: 1.5 kW Frequency-controlled feed belt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: used, functionality: fully functional, Year of construction: 2016, Our AK-EM (Made in Turkey) 2016 model machine is suitable for producing 10 25-gauge briquettes, 12 20-gauge briquettes, 16 15-gauge briquettes, 18 13.5-gauge briquettes, and 24 10-gauge briquettes in a single batch. The machine has no malfunctioning components. The cycle time is approximately 22 seconds. The machine will also include a 3-chamber sand bunker, conveyor belts, a 1 m³ planetary mixer, an automatic collection robot, and 7,500 production pallets in excellent condition and in good working order. The machine is operational and awaits customers at our workshop in the Karatay district of Konya. The machine will be supplied with: 1 25', 1 20', 1 15', 1 13.5', 1 10', 1 8.5', Dcodjxcavhopfx Acwjn 1 20' SW, 1 electrical plate mold, 3 sets of breaker knobs. AK-EM Marka 2016 model makinamız tek seferde 10 adet 25' lik briket, 12 adet 20' lik briket, 16 adet 15' lik, 18 adet 13,5 ' luk, 24 adet 10 ' luk briket imalatına uygundur. Makinada çalışmayan hiç bir aksam bulunmamaktadır. Makina ile birlikte, 3 gözlü kum bunkeri, konveyor bantlar, 1 m³ planet mixer, otomatik toplama robotu ve muhayyer ve bakımlı durumda 7500 adet imalat paleti verilecektir. Makina çalışır durumda olup, Konya Merkez Karatay İlçesinde yer alan imalathanemizde müşterilerini beklemektedir. Makina ile birlikte, 1 adet 25' lik 1 adet 20' lik 1 adet 15' lik 1 adet 13,5' luk 1 adet 10' luk 1 adet 8,5' lik 1 adet 20' lik SW 1 adet elektrik plakası kalıbı 3 takım kırıcı topuzu verilecektir.

Condition: excellent (used), functionality: fully functional, Saici SD 1500 hydrocyclone with new Warman 4/3 pump, overall good condition. Dodpfx Acexaugpjwocn

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Dcsdpfx Asw R Uzijcwen

Condition: excellent (used), A used Ratzinger impact mill D800 is being offered. 160 kW. Completely overhauled. Engine overhauled. Wear parts replaced. Steel construction included. Dcsdpfx Aow H Savecwsn

Condition: good (used), functionality: fully functional, Year of construction: 2019, 2019 H & M, MBA wall panel assembly station – Station includes (1) wall panel combination extruder (model X-Multi) set up with (2) horizontal Paslode Powermaster nail guns and a multi-function bridge including (2) nailing tool holders, a router and vacuum. One carriage on the bridge is equipped with an ITW CW650.7010 sheathing nailer and the other with an ITW S640.5210 staple gun and batten unit. The 7m butterfly station (model X-Tilt) receives panels from the combination extruder for easy flipping. Station builds from 4’-1” to 11’-10” tall wood wall panels to 23’ long, using 2×4, 2×6, 2×8 and 2×10 dimensional lumber. From the OEM’s brochure: “Combination Table – The X-Multi is a complete assembly machine which combines all the functions of a framing station and nailing bridge into one machine [run by] one operator to achieve speeds up to 15 lm/h (framing and cladding only). As each panel is clamped from the first nail of the initial stud, to the last nail in the cladding, the Mobi-One ensures that even the most complex of panels are manufactured accurately and efficiently. Drop down pins keep the panel square as it is manufactured.” Includes laser alignment for stud nailing, pneumatic cable reel and tool holder, two tool holders for CNC nailing of the wall panel, tools on bridge for framing and sheathing in one location. Used for both sub assembly and angled panel manufacturing.“ “Multi-function Bridge – A fully automatic station for the fixing of sheathing. Nailing / stapling operations can be completed accurately from data downloaded from the CAD package via our Design2Frame software. Multiple tools can be fitted to either one or two CNC carriages which can operate simultaneously to increase element throughput.” Dsdpfsw Hg E Tox Acwecn “Butterfly Station – A pair of hydraulically operated tables which enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. The hydraulic lifting of the tables is controlled by a 4kw motor with fail safe locking cylinders, a floor mounted control unit featuring push button operation as well as a wireless remote control. Includes (25) vertical infeed rollers, and (20) horizontal outfeed rollers for side-ways discharge.” Table includes any available platforms, rams and stands. Bridge includes all available sheathing nailers, router tool and on-board dust collection. Requires Design2Frame software to convert other customer file types into .MOB files. Computer running Windows 10 Pro. Includes any available spare parts and nail coils. North American support provided by Akhurst Machinery and OEM support available at an additional cost. Sold for $259,000 new. 400 Volt, 3-phase electrical required. 145 PSI air required.

Year of construction: 2004, condition: excellent (used), Technical Specifications Fully automated wet blasting system Components to be processed Engine components, other components Rotary table size: Ø 1300 mm Rotary table speed: 1 – 30 rpm Rotary table load capacity: 500 kg Max. component size: Ø 1500 mm and height: 1000 mm Number of blasting nozzles: 1 – 4 Blasting pressure: 0.5 – 6 bar (± 0.01) Cabin lighting Blasting media used: Al2O3 500 mesh as lapping media Blasting media feed system Feed pumps Maximum flow rate: 120 l/min at up to 35% concentration Dcsdpfxowi Hcwj Acwen Aluminum oxide

Condition: used, I would like to represent you our Spancrete GT-240 machines equipment and belongings list in the pictures attached. If you are interested in buying this machine please contact me. Spancrete GT240 hollowcore slipforming machine 15 cm standard hollowcore floor slab 2x1,2 m wide 20 cm standard hollowcore floor slab 2x1,2 m wide 30 cm standard hollowcore floor slab 2x1,2 m wide 15 cm standard hollowcore wall panels 1x2,4 m wide 15 cm standard hollowcore wall panels 2x1,2 m wide 20 cm standard hollowcore wall panels 1x2,4 m wide 25 cm standard hollowcore floor slab 2x1,2 m wide 25 cm standard hollowcore wall panels 1x2,4 m wide Accessories for 14x140mmx 190mm E-beams Spancrete bridgesaw 2,4 mw/Angle Cutting Upgrade Dcedpfx Aowc S Nvscwsn Spancrete wire rabbit Hydraulic Tensioning Unit Bucket 3 m3 2 pieces We only use it for 36 months.(2006-2019)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Production Line for Concrete Blocks and Slabs – MASA (GERMANY) Dcsdpfx Acov N Ru Sewjn Year of Production: 2006 Technical Condition: Very Good Line Components: - MASA R9001XL single-feed vibropress - HAARUP B4500/1 mixer with skip - Stacking elevator - Multi-forklift - Conveyors for wet and dry line - Gripper for placing products on transport pallets - External pallet conveyor - Production pallet rack – 5200 spaces - 4000 wooden production pallets – plywood, dimensions 1200x1100x40 mm - Horizontal strapping machine

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Year of manufacture: 1995. Dcjdpfov N H Hdex Acwsn Type: UF 1200x3650. Very good condition, fully functional.

Condition: good (used), Year of construction: 2021, operating hours: 9,000 h, Sandvik primary crushing plant Feed hopper 60m3 Hydraulic pusher 1300x6m Pre-screen Haver Böker Niagara 1600 x 4600 mm Jaw crusher Sandvik 1300 x 1100 mm CJ613 Dcjdpfjv Ebcrjx Acwon Rammer C400 with attachment hammer Service crane 8t Discharge conveyor 1000mm x13m

Year of construction: 2006, condition: refurbished (used), Multifunction Center Bar Wiser 26 Dual, manufactured by SCHNELL Completely revamped "as new" 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm 3 bars up to: 8/12 mm Bar length: 12 m Djdpfxovtx E Hs Acwscn 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm 3 bars up to: 8/12 mm Bar length: 12 m

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 Djdpevtp Rmefx Acwjcn - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, COMPLETE AUTOMATIC EPS-POLYSTYRENE PRODUCTION LINE (5 trucks/550 m3/12 hours) Dcsdpjvlw R Ejfx Acwsn General information: Capacity: 5 trucks – 550 m3 / 12 hours Manufacturer: Made in Germany – Goettex GmbH Complete EPS production line for white and graphite material Includes all spare parts and accessories as well as pipework. Includes: - Block mould (transport carriage with chain conveyor, fully automatic cycle, touch panel, insulated, vacuum system) 2.67 m3, Height: 2080 mm – Width: 1270 mm – Depth: 1070 mm - Steam tank 5 m3 with parts - Working (loader) silo 1 for white material, automatic level control - Working (loader) silo 2 for gray material, automatic level control - Silo system with fully automatic level control (7 units) 86 m3 × 7 pcs, Height: 6000 mm with cone, Width: 4000 mm, Depth: 4000 mm - Pre-expander 1, capacity 1.1 ton/hour - Pre-expander 2, capacity 1.1 ton/hour - Mixing station 1 for white material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Mixing station 2 for gray material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Air tank (200 liters) - Octabin container holder (for 1 Octabin or 1 Big-Bag) - Cutting line with automatic wire adjustment, Complete line consists of 3 sections: 1) Block Start table 2) Vertical section 3) Horizontal section, with automatic wire adjustment, with EPS recycling grinder - Packing machine with ink printer, Cycle time: 12 sec/package, Film feed via 2 rolls up to 350 m3 – with Touch panel – Ink printer with 2 colors - Dedusting unit 1 for white recycling, connected to the grinder with powder flowing into the sack - Dedusting unit 2 for gray recycling, connected to the grinder with powder flowing into the sack - Compressor for all machines - Cooling tower for vacuum system All PLC and frequency inverters are SEW and Toshiba. With full pipe system. All fans and electric motors are integrated with frequency inverters and SEW gearboxes. The complete production line includes the processing of both white and graphite raw materials. Full software support and spare parts supply available. Relocation of the complete technology to the customer's site is performed by a professional company. After transport and assembly, full system commissioning and training are included in the price. 5-10 working days for 2 persons.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Dedevlwqlspfx Acwecn Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Year of construction: 1990, condition: good (used), functionality: fully functional, Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with water addition 6 x autoclaves Steam boiler: 1986 Year of construction new boiler: 1991 Manufacturer: Loos Type UL SH 14000 Boiler capacity: 8.5 to steam/h 6`000kW Working pressure: 16 bar Year built burner 2011 Manufacturer: Weishaupt, burner type RGL 70/2-A, model 3NL Multiflamm, protection class IP40 Almost new water treatment plant with conversion osmosis plant 2002, LN-120 for steam generation New pipes in V4A instead of PVC Reekers Packaging Plant Year of construction: 1999 Dsdpfovkhtnsx Acwjcn

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Pipe Production Plant • Wet cast concrete pipe production plant for sale • Fully automated factory designed and developed by Consmema/KTB Dsdpfx Ajvkhm Uscwecn • Fully complete set of machinery • In operation since 2016 in West Europe • Capacity up to 300 pipes per day in different sizes: 300-1500mm • Very distinctive pipes: smoother, lighter and sawable • For sale because of strategical redirection of selling company

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3 Dcodpfx Acsu U Ad Rswen

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Optional service aisles Dcedpfeu N Ndvjx Acwen Rollers Motor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, Production line for paving, kerbstones and studs by pressing. Dedpeu Abtvjfx Acwocn Manufacturer: Symmetrica / Symmtech Year of construction: 2013 Production capacity/shift: 220-260 sqm The production line was put into operation for the first time in fall 2014. It has only one owner. The production line is being sold in its entirety. For more information, please call us or write to us on WhatsApp: +491779220303

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Dodpfjuwrv Dex Acwecn