PURANT GmbH

Condition: used, mileage: 83,000 km, power: 81 kW (110.13 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Kamei storage compartments, remote control, heated exterior mirrors, first owner, complete service history, very clean, nationwide delivery €295 + VAT, test drive and extended warranty available upon request. No.: 090 Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. More vehicles can be found at: Kjdpfx Anjzfw Nkjwjdn

Condition: used, mileage: 25,000 km, power: 81 kW (110.13 HP), first registration: 01/2022, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Remote control, heated exterior mirrors, heated driver's seat, ladder rack, first owner, complete service history, very clean, nationwide delivery 296 EUR + VAT, tow hitch incl. installation 790 EUR + VAT. Test drive and warranty available upon request, No.: 657 Kedpozfw Ndjfx Anwsdn Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. More vehicles available at:

Condition: used, mileage: 77,000 km, power: 110 kW (149.56 HP), number of beds: 4, fuel type: diesel, gearing type: mechanical, color: silver, first registration: 10/2021, axle configuration: 2 axles, emission class: euro6, overall weight: 2,800 kg, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Refurbishment – NEW Kitchen with a 2-burner gas stove, sink, compressor refrigerator, swiveling passenger seat (driver’s swiveling seat optional), curtains, auxiliary heating, 5 seats, 4 sleeping berths, convertible bed/bench (Isofix optional), curtains, table unit, sliding window on the left, slatted bed in the pop-top roof, gas certificate, remote control, delivery with choice of: summer tires or winter tires, remote control, heated exterior mirrors, driver’s armrest seat, multi-function leather steering wheel, cornering lights with fog lights, No.: 984 Opening hours: Monday to Friday 8:00 a.m. to 12:00 p.m. and 1:30 p.m. to 5:00 p.m., Saturdays from 9:00 a.m. to 11:30 a.m. More vehicles available at: Kdjdpfxjzfw I Te Anwsn

Condition: used, mileage: 171 km, power: 81 kW (110.13 HP), number of beds: 4, fuel type: diesel, gearing type: mechanical, color: white, first registration: 07/2023, axle configuration: 2 axles, emission class: euro6, overall weight: 2,800 kg, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, New vehicle with day registration!!!!! Kitchen with 2-burner gas stove, sink, compressor refrigerator, passenger swivel seat (driver swivel seat possible), curtains, auxiliary heater, 5 seats, 4 sleeping berths, sleeping bench, (Isofix possible), curtains, table unit, sliding window on the left, slatted bed in the pop-top roof, gas system inspection, remote control, delivery with customer's choice of summer or winter tires, remote control, heated exterior mirrors, No.: 296 Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. Kdsdpfx Ajzfw I Honwon More vehicles available at:

Condition: used, mileage: 112,000 km, power: 81 kW (110.13 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 01/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, New addition Awning, remote control, heated exterior mirrors, first owner, complete service history, very clean, nationwide delivery €295 + VAT. No.: 451 Kjdozfw Iyopfx Anwjdn Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. More vehicles available at:

Condition: used, mileage: 84,000 km, power: 81 kW (110.13 HP), number of beds: 4, fuel type: diesel, gearing type: mechanical, first registration: 01/2022, next inspection (TÜV): 02/2028, axle configuration: 2 axles, emission class: euro6, overall weight: 2,800 kg, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Refurbishment: NEW Kitchen with 2-burner gas stove, sink, compressor refrigerator, driver's swivel seat (passenger swivel seat optional), curtains, auxiliary heating, 5 seats, 4 sleeping berths, sleeping bench (Isofix possible), curtains, table unit, sliding window on the left, storage above the kitchen, storage compartment for a portable toilet, slatted bed in the pop-top roof, gas system inspection, Kedpfx Anozfw Itswjdn remote control, delivery with choice of: summer or winter tires, remote control, heated exterior mirrors, driver and passenger armrest seats. No.: 731 Opening hours: Mon-Fri 8:00 a.m. to 12:00 p.m. and 1:30 p.m. to 5:00 p.m., Saturdays from 9:00 a.m. to 11:30 a.m. More vehicles available at:

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Planing width: 520 mm - Heavy cast iron tables - Sound insulated Kdedjzfw Igspfx Anwsn - TERSA cutterhead with 4 knives - Pneumatic quick-change system - Motorized thicknessing table lift with LED digital display - Swivelling aluminium auxiliary fence - Pneumatically controlled cutterhead guard - Foldable safety cover - Combined extraction hood for both planing types D=100 mm - Pneumatic service unit - CE mark Availability: short-term Stock location: 63934 Röllbach

Condition: used, Year of construction: 1980, Used machine Ksdpfx Anszfw Iaewsdn Year of manufacture: 1980 Features and technical data: - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260015, The Behringer HBE 261 A Dynamic automatic band saw is a fully hydraulic, cost-effective, high-performance band saw designed for automated 90° cuts in industrial manufacturing. Kdjdpfxezfw Dhj Anwsn This Behringer band saw is ideal for the safe, precise cutting of structural steel sections as well as difficult-to-machine solid metal materials and comparable solid plastics, in both manual and automatic modes. The HBE 261 A Dynamic automatic band saw has a cutting range of 10 mm to 260 mm for round material and 10 x 8 mm to 300 x 260 mm for flat material, with a saw blade size of 4.440 x 34 x 1.1 mm. The frequency-controlled band saw drive has a drive power of 2.6 kW and a continuously variable cutting speed of 15–110 m/min. The cutting speed can be set and read on the control panel. The total drive power is approximately 3.7 kW. The machine features optional equipment such as a chip conveyor, central lubrication, a line laser, electronic monitoring of the minimum speed, an LED worklight, a spray gun for chip removal, a cutting display with error diagnosis, and a roller conveyor system on the infeed and outfeed sides.

Condition: good (used), mileage: 201,781 km, power: 125 kW (169.95 HP), first registration: 08/2012, fuel type: diesel, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,600 kg, Year of construction: 2012, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - 100% dealer-maintained - Alarm system - Armrest - Audio controls on the steering wheel - Exterior mirrors with integrated turn signals - AUX input - Outside temperature display - Becker (navigation system) mount - Co-driver's bench seat - Differential lock - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Dealer-maintained - Height-adjustable steering wheel - Folding exterior mirrors - Multifunction steering wheel - Particle filter - Disc brakes - Headlight height adjustment - Immobilizer - Tachograph - Partition with window = Additional Information = General Information Number of doors: 2 Cab: single cab Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Maximum front axle load: 1,900 kg Maximum rear axle load: 2,600 kg Weights Unladen weight: 1,970 kg Payload: 1,530 kg GVW: 3,500 kg Maintenance, History and Condition APK (technical inspection): valid until 09/2026 Technical condition: good Optical condition: good Product Safety EU responsible: Nico Drost Molenstraat 4 Lienden 4033AV Lienden, GLD, NL = Company Information = Kodpezfw Dbofx Anwsdn Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van or truck. The indicated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: not inspected (used), MURATEC MT 12 horizontal axis cnc lathe with gantry FANUC 18 i numerical control Turning diameter (mm) 160 Rot. diameter on bench (mm) 250/210 Max. turning length (mm) 220 Spindle taper type ASA 5 Min spindle speed (rpm) 10 Spindle speed max (rpm) 4500 Spindle speed ranges 2 ELECTRONIC Rapid feed rate (mm/min) 24,000 Longitudinal travel (mm) 200 Z1 axis Transverse travel (mm) 200 X1 and X2 axis Turret type 2 x 15 Spindle motor power 7.5 kw Voltage (volts) 400 Year of construction 2005 Serial no. 04KX23750001 Weight (Kg) 5500 Height (mm) 2200 Width (mm) 2700 Depth (mm) 1850 gantry workpiece size diameter 120 mm x 100 mm; max. allowable workpiece weight 3 kg for No. 2 workpieces; rapid speed 120 m/min. Spindle bore (mm) 62 Accessories no. 2 axial motorized modules, no. 2 radial motorized modules, chip conveyor, Z-axis counter spindle 2 stroke 650 mm; counter spindle speed 4500 rpm; C-axis continuous, motorized tool speed 4000/min; motorized tool motor power 3 kw. YOM 2013 Kedezfw A Rjpfx Anwsdn

Condition: not inspected (used), YOM 1998, Hidenhein 430 .12000/1000/1450mm. 36000 kg Kdsdpfx Aezfw A Donwsn

Condition: used, Year of construction: 2005, Travel: X-1500 mm, Y-1300 mm, Z-600 mm Control: iTNC530 Spindle mount: HSK-63A Spindle speed: 15.000 U/min Kdodpozfwzyefx Anwen table size: 1500 x 1000 mm max. table load: 2.500 kg Distance between table and spindle: 200-800 mm tool magazine: 30 fold Tool measurement: BLUM Laser chip conveyor: IKZ machine weight: approx. 14,000 kg Dimensions: L: 5000 x B: 2400 x H: 2999 mm

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Ksdpfxjzfwyce Anwjdn Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Kdedpfjzfwx Ssx Anwsn Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Kdedpfx Aozfwx Eenwsn Power supply: 380V + compressed air.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover Kdjdpfx Anozfwxxjwsn - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Kedpfx Anjzfwxrjwsdn Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Kdsdpfx Aszfwxlsnwjn Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Kdsdpfjzfwxfox Anwen Height and angle adjustment.

Condition: good (used), Baumann BSB-2 Paper Jogger The machine is 100% functional and ready to use. Technical specifications: Maximum format: 640×920 mm Stack height: 160 mm Kdedpfx Aezfww Uonwon Weight: 350 kg Power supply: 400 V Air table Tilt angle adjustment

Condition: good (used), Busch SE 125 Pile Turner This machine is like new, fully functional, and ready to use. This turner is from the German manufacturer Busch. This is the current model in production. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 850 kg Power supply: 380 V Kedpfx Aezfww Ionwjdn Controlled from a control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Includes documentation.

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Kodpfozfwwzox Anwodn Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Device weight: 860 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2006, functionality: unexamined, For sale: lot of 7 industrial electric motors and gear motors. The lot includes: - Siemens electric motors - VEM ATEX explosion-proof motor - Gear motors with industrial gearboxes - Various sizes and power ratings Kodpfezfwwbex Anwsdn Equipment originates from industrial application and has been professionally removed and stored. Condition: Used industrial surplus. Functionality has not been tested. Sold as shown in photos. Ideal for: - industrial maintenance - spare parts stock - conveyors - mixers - process equipment - machine builders Sale preferably as one complete lot. Location: Dunajská Streda, Slovakia (EU) Worldwide shipping possible.

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit Kdodpfszfwvwsx Anwon - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg