Ivo Cervinka, Handels- und Vermittlungsbüro

Condition: used, Year of construction: 1974, Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) Labelling Machine – Enos Euro C5000 (2019) Capacity: Up to 5,000 containers/h (depending on label and format) Formats: Bottles, cans, other cylindrical containers Application: Labelling Configuration: Manual side-barrier adjustment (tool-free) Scope of Delivery  Isobaric Filling Machine | Schilpp | Contibloc 20/5 | 1974 | 20 filling valves, 5 crown capping heads Labelling Machine | Enos Euro | C5000 | 2019 | Manual side-barrier adjustment   Dksdpfx Ajyr Nr Sef Nsi

Condition: used, Year of construction: 2014, Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  Capacity: Maximum 3,200 bph Formats: Maximum container dimensions 120 mm diameter × 350 mm height Application: Production of PET containers Configuration: 2 cavities Installed Power Preform rotation motor: 0.18 kW Clamping press motor: 7.5 kW Stretching motor: 3.0 kW Transfer arm motor: 1.3 kW Preform heating oven: 32.0 kW Preform feeder: 0.36 kW 24 VDC power supply (10 A): 1.0 kW Air reflector fan: 0.75 kW Neck cooling fan: 0.75 kW Lubrication pump: 0.07 kW Container evacuation: 0.09 kW Intermittent chain rotation: 0.18 kW Cooling Circuit Water inlet temperature: 10–20 °C Water consumption: 2 m³/h Operating pressure: 4 kg/cm² Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure Operating pressure: 7 kg/cm² Air consumption: 800 l/min Pneumatic System – High Pressure Operating pressure: 38 kg/cm² Air consumption: 5,000 l/min Dsdpfxjyr Iy Ue Af Noki

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Technical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing during commissioning.Operational Performance & VersatilityPurpose-built for beer, the line emphasizes hygienic filling, robust glass handling, and end-to-end quality assurance. Empty bottle inspection removes non-conforming containers prior to filling, while post-fill controls verify liquid level and cap integrity. The tunnel pasteurizer stabilizes product for distribution, and the dry end manages crate pack... Dkjdpfsyr Huqox Af Nsi

Condition: used, Year of construction: 2013, operating hours: 17,387 h, machine/vehicle number: LC607, Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3/Speed aseptic carton packaging solution configured for 250 ml base format. Built for high-volume industrial packaging and beverage production, it offers reliable, second hand performance with proven uptime. The line integrates core filling and downstream modules to support efficient, continuous operation.Manufacturer: Tetra Pak Packaging Solutions S.p.A.Model: A3/SpeedYear: 2013Operating hours: 17387Rated speed: up to 24,000 packs/hour (250 ml base)Package format: 250 ml baseContainer type: Carton (Prisma)Electrical supply: 400 VIncluded equipment: Filler, Helix30, TSA30, CBP30, Line Controller 30, ConveyorCompliance: CE markedAdvanced Automation & Control SystemsThe line features integrated automation for stable throughput and quality. The Line Controller 30 coordinates primary and downstream modules, balancing flow across the conveyor network. Operator interfaces enable straightforward adjustments, status monitoring, and fault diagnostics. Safety interlocks and emergency stop devices enhance operator protection and reduce unplanned downtime.Coordinated line control for synchronized module operationAutomated speed regulation across filler and downstream equipmentOperator-friendly controls for setup and routine operationIntegrated safety circuits and emergency stop devicesProduction Line Integration CapabilitiesDesigned for seamless integration, this packaging line connects upstream and downstream equipment through a modular conveyor system. The A3/Speed filler works in tandem with Helix30, TSA30, and CBP30 to manage post-fill operations. Changeover for the 250 ml base format is streamlined to maintain high availability and consistent quality in beverage production.Inline operation with synchronized conveyor handlingOptimized for 250 ml baseModular downstream accessory equipment for post-fill processesSuitable for industrial packaging applications within high-speed environmentsMachine Condition & Maintenance HistoryThis second hand A3/Speed line from 2013 shows 17387 operating hours and is presented as a working solution suitable for rapid deployment. The equipment bears CE marking and is configured for 400 V electrical supply. Overall condition aligns with a maintained, ready-for-operation used bottling line, offering a dependable option for facilities expanding aseptic carton packaging capacity.Operational Performance & VersatilityPurpose-built for aseptic carton applications, the line maintains consistent pack quality at high speeds. The coordinated modules support stable flow, minimizing bottlenecks and start/stop cycles. Its Prisma 250 ml base configuration is well-suited to beverage production environments seeking reliable throughput and standardized carton presentation within industrial packaging operations.High-speed aseptic carton filling with robust downstream... Dsdpfsyr Hudox Af Noki

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Dkjdpfxsyr Awbs Af Nji Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: like new (used), the complete Tetra Pak volume conversion kit A3 Flex 1000 ml Slim, version machine v600, Dodeyr Avwepfx Af Noki Removed from the filler YOM 2018 with 9000 running hours. Packed into original wooden Tetra Pak boxes. New condition. Location - Poland

Condition: ready for operation (used), Year of construction: 1996, Swing top capper for 10,000 bottles, completely overhauled in 2005 by AMS Dkodpeyry Hgofx Af Nsi

Condition: used, Year of construction: 2007, BMS Be-Ens plating for crates 400x300 mm, can be converted for other crate sizes. Dsdpfx Afoyryz Rj Njki

Condition: used, Year of construction: 2005, BMS Bottle Unpacker 2005, complete stainless steel 2 heads for 0.33l, 24-bottle crates 2 heads for 0.5l NRW, 20-bottle crates Dsdpfx Afoyryzwj Njki 2 heads for 0.5l swing-top, 20-bottle crates 2 heads for 0.7l, 12-bottle crates With bottle inspection

Condition: used, Year of construction: 2005, BMS bottle packer 2005, complete stainless steel version 2 heads for 0.33l, 24-bottle packs 2 heads for 0.5l NRW, 20-bottle packs 2 heads for 0.5l swing top, 20-bottle packs 2 heads for 0.7l, 12-bottle packs Dkedpjyryzqsfx Af Noi With bottle inspection system

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, Manufacturer: GEA (TDS) Type: Aseptic Tank Year of manufacture: 2015 With manhole Dksdjyrdzbopfx Af Nei With agitator Including valves Including control cabinet for valves Condition: as new, never used

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Dkedpfxsyq Rkye Af Noi Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Year of construction: 2005, Overview  This linear labeling machine was manufactured in 2005 by Mecatronic. The machine is designed for applying self‑adhesive labels on bottles. Technical data Formats: 3/8 L and 3/4 L up to 1.5 L Application: Bottle labelling Configuration: Linear machine, 4 labeling heads Labeling system: Self-adhesive Dkodpfx Aoyq Iu Ajf Noi

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Dkedeyq Ia Eopfx Af Nei

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Dkodpfxeyq Ezyj Af Nei

Condition: used, Year of construction: 2020, Overview This chamber pasteurizer was manufactured in 2020 by German company RICO. The machine is designed for pasteurization processes and was previously in operation at a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Application: Pasteurization Configuration: Chamber pasteurizer 4x1, indoor installation Dedoyqx Tpopfx Af Njki

Condition: used, Year of construction: 2012, Overview  This pallet stretch wrapping machine with conveyors was manufactured in 2012 by Not provided Tosa Group Bande Releuse. The machine is designed to secure palletized loads with stretch film for transport and storage. The system applies controlled film tension to ensure load stability and protection during handling and logistics operations. The machine is currently stopped (idle for one year) and remains installed and operational. Technical data  Capacity: 25 pallets/hour Application: Pallet stretch wrapping Configuration: Stretch wrapping machine with integrated conveyors Dksdpfoypgi Njx Af Noi

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, inner diameter: 25 mm, We offer this very good NORTAN Minerva 108 Wirehood machine. Dodpfjypabxox Af Noki It has parts for many bottle diameters. Great working shape. Now is set up for 25,5mm cork/wirehood (beer). But it can be easily converted for bigger diameter. We don't use it, because we discontinued cork closure on our beer bottles. Manufacturer: NORTAN Model: Minerva 108 Wirehood Construction year: 2014 year Condition: very good Category ID: 310 Type ID: 1066 Type: beverage production machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), The production will vary depending on the product. Djdpfx Aeyn Hcasf Njki

Condition: refurbished (used), Year of construction: 2015, - with lenticular membrane - with closed press basket - machine overhauled Technical data: Press basket capacity: 6 hl Filling quantity whole grapes: 420 kg Filling quantity crushed grapes: 1,200–1,800 kg Filling quantity fermented grapes: 1,800–2,400 kg Total installed power: 1.47 kW Dimensions: Length: 1,870 mm Width: 1,140 mm Djdeyn Dq Ujpfx Af Noki Height: 1,470 mm

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2212049506-010-0001, type of input current: AC, input voltage: 400 V, operating pressure: 3 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, protection type (IP code): IP55, rotational speed (max.): 2,900 rpm, volume flow: 50 m³/h, type of cooling: air, Used, completely overhauled pump in very good condition Dkedpfeynxifsx Af Nsi

Condition: like new (used), functionality: fully functional, Perfectly synchronized monoblock group of Piston Dispenser - Can seamer. High dosing accuracy. The volumetric dosing system is used to dose any type of product, both liquid and semi-liquid, thick and chunky liquids (red beans or pineapple chunks), edible or not. Its very special feature is the accuracy of the dosing, thanks to the volumetric measurement of the product in the cylinder. * Production may vary depending on the format and product to be sealed. Seamer model: 4M Dsdpsynkaiofx Af Njki

Condition: used, Year of construction: 2006, Overview  This blowing machine was manufactured in 2006 by German manufacturer KRONES. The machine was part of a complete non‑returnable PET bottle filling line dedicated to fresh milk production. It was used to produce 1.0 L PET bottles and operated at a nominal speed of 9,000 bottles per hour. The machine is described as being in good condition. The equipment becomes available as the seller decided to outsource milk production and continue only cheese production at the site. Technical data  Capacity: 9,000 bottles/hour Formats: 1.0 L Application: Fresh milk Container material: PET Neck finish: 38 mm Djdpfxeym D U Rj Af Noki

Condition: used, Year of construction: 2006, Overview  This complete filling line for non-returnable PET bottles was manufactured 2006 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line and dedicated to produce fresh milk. The line is designed for milk production, handling up to 9,000 b/h and is in a good condition. The equipment becomes available as the seller dediced to commit the milk production to an external company and continue only the cheese production in the factory. Technical Information Product: Fresh Milk Container Material: PET Bottle Format: 1,0 L Nominal Speed: 9.000 BPH Neck Finish: 38 mm Label Type: OPP Rollfed Packaging: 16 bottles per crate Pallet Type: Europallet 800 x 1200 Scope of Delivery  Blowing Machine | Krones | Contiform S8 | 2006 Preform Tipper | TM | KPT | 2012 Air Conveyors (~100 m, 9 fans) | Krones | AirCo | 2009 Filling Monoblock (Neck Handling, 32 valves) | Krones | Volumetic | 2006 Capper (8 heads) | Krones | 2006 Ink Bottles Marker | VideoJet | 2006 Labelling Machine | Krones | Contiroll | 2004 Case Packer | CMT | IFL3T | 2004 Palletizer (Fanuc M-410 Robot) | Elettric 80 | 2009 LGV Pallet Transport Shuttle (Optional) | Elettric 80 | 2009 Dksdsym D Ukepfx Af Nji

Condition: used, Year of construction: 2022, Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C Dsdpfx Afoym D R Eo Nski