Schwaiger GmbH

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, PL → EN (tłumaczenie): Four-side planer Leadermac LMC723C (7 heads) Year of production: 2004 Technical data: * Maximum working width: 230 mm * Maximum working height: 120 mm * Spindle diameter: 40 mm * Number of heads: 7 pcs * Bottom horizontal spindle: 7.5 kW * Right spindle: 7.5 kW * Left spindle: 5.5 kW * Top horizontal spindle: 7.5 kW * HP inverter: 3 kW * Number of top feed rollers: 11 pcs Nodpexzuxzjfx Afqoli * Number of bottom feed rollers: 4 pcs * Infeed table length: 2000 mm * Pneumatic pressure: Yes * Mechanical speed regulator: Yes * Cardan transmission: Yes * Voltage: 380 V * CE: Yes * Weight: 4500 kg * Dimensions: 4700 × 2100 × 1700 mm

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Nedpfx Afoxzthbsqsli Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm electric height adjustment 7.5 kW motor Nlodjxztfyopfx Afqji star-delta start 380V power supply

Condition: excellent (used), Leadermac Smartmac 423 Four-Side Planer Maximum planing width: 230 mm, Nedpfx Afoxzqwyoqeli Maximum planing height: 120 mm, 4 spindles, Electric adjustment of planing dimensions, Spindle configuration: bottom 5.5 kW; left and right 7.5 kW each; top 7.5 kW Motors with brakes, Spindles diameter 40 mm, Fully adjustable spindles, Machine has 2 feed rollers in the table, suitable for wet timber, Feed via cardan shafts with regulation Machine offered complete with the heads visible on the spindles, Cardan shafts not worn, runs smoothly without shakes or vibrations, Original solid planer, weight approx. 3 tons. Very good condition.

Condition: used, Weinig Powermat 500 planer and moulder for four-sided planing and profiling of wood with CNC control and Powerlock quick-change system. spindle: 7 Nlsdpjxzdwysfx Afqoi spindle 1: Bottom / 7.5 kW / 8,000 rpm spindle 2: Right / 7.5 kW / 8,000 rpm spindle 3: Left / 7.5 kW / 8,000 rpm spindle 4: Right / 7.5 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Top / 7.5 kW / 8,000 rpm spindle 7: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 120 mm feed: 30 m/min / 4 kW Planer table length: 2.500 mm Air cushion table: Yes Control: PowerCom Plus

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Left – 5.5 kW Top – 5.5 kW Nlodpexzbn Nsfx Afqoi Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 120 mm, workpiece width (max.): 240 mm, number of spindles: 5, Equipment: cabin, motor brake, SCM Superset 23, 5 spindles, 5th spindle below, programmed motorized width and height adjustment, automatic lubrication Nlodpfx Afexy Hmbeqji

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 310 mm, planing width: 310 mm, Top model from Weinig: Weinig Powermat 3000 Special 6-spindle four-sided planer All motors frequency-controlled, 4000–12000 RPM Njdpfsxyxhwjx Afqeli Extra wide working width of 310 mm Working height 160 mm - Optional we can make it 200 mm All spindles with Powerlock High-speed feeding system of 100 m/min With profile and straight jointers Axial and radial CNC-controlled axes Short infeed table, 1.1 meters WMC Moulder Master Full options machine ! Like new, never used in production!

Condition: excellent (used), Four-side planer SCM Compact 23 Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom Right Left Top Nodexyv A Eopfx Afqeli Spindle speed: 6000 rpm Two feed speeds: 6–12 m/min Adjustable spindles

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Nledpexyu Itofx Afqji

Condition: excellent (used), CATALOG NUMBER 7822 Technical Data: - Axis width: 410 mm - 4-knife cutterhead - Max working thickness on the thickness planer: 200 mm - Max working thickness on the side heads (three-sided): 110 mm From above: Nledpfexyki Hjx Afqsi - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterhead - Pressure bar - 2 smooth outfeed rollers - Pressure bar From below: - 3 adjustable rollers in the lower table From the rear: - 2 side spindles - Spindle height: 110 mm - Spindle diameter: 30 mm - Spindles adjustable up/down, right/left - Side spindle motors: 2x4 kW - Main motor: 4 kW - 3 feed speeds: 0.12; 0.19; 0.30 m/s - Feed motor: 0.75 kW - Table lifting motor: 0.75 kW - Extraction ports: 3x120 mm - Overall dimensions (L/W/H): 2050x1300x1500 mm - Weight: 1200 kg ADVANTAGES – Made in Poland – Very good condition – Electric table lifting – Technical documentation (DTR) – Used planer Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Nedpfx Afoxyik Asqsli 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Year of construction: 2020, Beautiful modern planer moulder from market leader Weinig, model Powermat 700. 5 spindles, with the 5th spindle underneath. Nlodpoxydmljfx Afqoi

Condition: excellent (used), Year of construction: 1989, workpiece width (max.): 220 mm, Technical Sales Description – Hydromat 17B General Information Manufacturer: Weinig AG Model: Hydromat 17B Type: High-Performance Profile Moulder / Planing and Moulding Machine Year of Manufacture: 1989 Operating Voltage: 380 V / 50 Hz Nledpfxexyawao Afqsi Description Heavy-duty, high-performance planing and moulding machine constructed with vibration-damping, torsion-resistant cast-iron components in a modular system. Designed for precise and efficient wood processing with high continuous output. Mechanical feed, adjustable within the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long with quick adjustment feature. Chip removal adjustment for surfacing and jointing spindles, each with a setting range of 10 mm. Technical Data Feed speed: 5 – 35 m/min, mechanical Feed motor: 5.5 kW / 7.5 HP Operating voltage: 380 V / 50 Hz Table length: 2000 mm Chip removal adjustment range: 10 mm (surfacing and jointing sides) Machine configuration: Without outboard bearing, high-performance execution CNC control: Siemens S5-130 WB, with battery-buffered RAM memory CNC Control • 12" display • Up to 16 axes • mm/inch switching • Operator guidance and diagnostic system with approximately 120 messages • External input possible • Emergency operation in case of electronics failure Special Equipment 4 NC controls for axis regulation 2 motor upgrades from 5.5 kW to 7.5 kW (10 HP) for spindle no. 1 and 6 Handheld control integrated Preparation for mounting a universal spindle Air-circulating pump for table resin removal, manually operated Operating hours counter Straight jointer for spindles 4, 5, 6 and 7 Cutting circle diameter 250 mm for spindle 5 2 NC controls for vertical/horizontal positioning 1 jointing unit with free-running drive system Guide rollers for infeed rollers (both axes) Feeding magazine type EHM 14 for Hydromat 17B Working width: 220 mm Working height from: 10 mm Workpiece lengths: 300 – 3000 mm Feed: Pneumatic, depending on workpiece length Required air pressure: 6 bar Cycle rate: 100 cycles/min Feed force: 1500 N at 6 bar

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm Nlodoxxxbnspfx Afqei - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Nljdpfx Afjxxtuveqei Table length 198 cm Table lubrication Stepless feed speed adjustment Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: used, Year of construction: 2009, - Moulder 5 stations / 4 tool holders for sharpening Pin diameter: 40 mm Digital positioning Variable speed: 5 to 15 m/min Liftable inlet roller Pneumatic pressers Electric display meter Table lubrication via pedal 99 possible programs Capacity: minimum width 20 mm / maximum width 230 mm - minimum height 8 mm / maximum height 120 mm Hood opening safety feature CE standards => OK Tool holders: 125 mm diameter Nlodpfxsxxtlbj Afqei Engine power: Planer infeed = 5.5 KW Spindle tops left and right = 11 kW Upper planer = 7.5 kW Lower planer = 5.5 kW Total machine power = 32 kW Suction diameter: 120 mm Voltage: 380 V Dimensions: 250 x 150 x H175 cm +/- 2.200 kg - Automatic charger Minimum piece length: 160 cm Maximum piece length: +/- 400 cm Loading height: 60 cm Dimensions: 195 x 45 x H165 cm

Condition: used, • Four-sided planer with a classic spindle Nedpfx Aexxkt Asfqjli • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: excellent (used), Casadei C4 Four-Sided Planer Nlsdpoxxiw Tofx Afqji Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle configuration: 1. Bottom 2. Right 3. Left 4. Top Spindle speed: 6000 rpm Spindle diameter: 40 mm Two feed speeds: 6–12 m/min Tool size: 125–140 mm Feed powered by cardan shaft Technical documentation

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Nsdpfx Afoxw U Sysqsli Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW Nledpfxoxwytis Afqsi - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 230 mm, type of input current: three-phase, number of spindles: 7, working range: 230 mm, blade shaft diameter: 50 mm, Equipment: cabin, motor brake, Four-sided planer Weinig Hydromat 23, 80m/min Working width: 230mm Working height: 160mm Number of spindles: 7 Spindle configuration: 1. Bottom: 15kW 2. Right: 11kW 3. Left: 11kW 4. Top: 15kW 5. Top: 7.5kW (hydro support) 6. Bottom: 11kW (hydro support) Nedpfxoxww Hms Afqsli 7. Universal: 11kW (variable speed via frequency inverter) Planing dimension control from ATS panel Spindle speed: 6000 rpm Spindle diameter: 50mm 5 feed rollers in working table Feed speed adjustable via frequency inverter up to 80m/min Feed driven by cardan shaft Pneumatic hold-downs Technical documentation included Machine dimensions: 460x230x200cm (H) Weight: 6000kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weinig Powermat 600 Year of manufacture: 2014 5 spindles Feed motor: 3 kW Nodjxwtwbspfx Afqeli 1st motor: 7.5 kW 2nd motor: 11 kW 3rd motor: 7.5 kW 4th motor: 7.5 kW Spindle configuration – bottom, right, left, top, bottom Soft start Heated control cabinet (Webasto) Pneumatic pressure tables Manual adjustment of tables Electronic brakes Manual axis adjustment Variable feed speed control

Condition: used, Year of construction: 2002, functionality: fully functional, planing width: 280 mm, working height: 80 mm, overall weight: 2,500 kg, For sale: WEINIG Opticut 150 cross-cut optimizing saw. The machine has been with our company since new. Good condition, regularly serviced, and in continuous use. Viewing and testing on site possible. Scheduled dismantling at the end of 2025. Included: a new infeed belt – not yet installed. Nsdpfx Asxvyt Tsfqjli

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 spindles, Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 37 kW / 12-120 m/min Spindle configuration: 1 - Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) – with fully automatic straight jointer 5 - Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6 - Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 8 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 9 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 10 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment with electronic digital display. Includes 2 heavy-duty lateral pressure rollers, diameter 140 mm, pneumatically actuated. Support feet, height 320 mm, for table height of 1190 mm. Nlsdpfx Afsxvmm Tsqei Marathon POWER Coating for machine table, fences and guide rails (excluding infeed table and special table plates). Special coating for the protection of table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, particle board, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, with a diameter of 120 mm. Located in the area of the right and left spindle.