Johannes Wiebel Werkzeugmaschinen & Industrieanlagen

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface Redpfezh U D Djx Anpew

Condition: ready for operation (used), Year of construction: 2002, Make: HEDELIUS Type of machine: CB 80/2300 Year of manufacture: 2002 Control system: Heidenhain TNC 426 Machine's weight: 14.000 kg Tool holder: SK 40 spindel speed: 8.000 1/min x-travel: 2.300 mm y-travel: 800 mm z-travel: 600 mm Speed range: 8.000 1/min Rsdpfx Aezh Huzsnpjw max. Table load: 2.800 kg Max. workpiece weight: 2.800 kg Operating time: 54.386 h Chip removal device: Ja Spindle operating time: 26.351 h Table dimensions: 2.900 × 750 mm Number of tools in the magazine: 30-fach

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General Rodpfxozh Hlaj Anpew • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor Rjdjzh Hg Rspfx Anpew

Condition: excellent (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 720 mm, nominal power (apparent): 26 kVA, controller manufacturer: Mazak, controller model: SmoothX, workpiece length (max.): 2,500 mm, workpiece width (max.): 820 mm, total height: 3,355 mm, total length: 4,250 mm, total width: 4,046 mm, table width: 820 mm, table length: 2,500 mm, table load: 1,700 kg, rotary table diameter: 500 mm, rotational speed (min.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 7,819 h, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Continuous 5-axis machining. Cromar particle filter chip conveyor, 15 bar internal cooling, Blum workpiece measurement system. Tool magazine with 30 tool slots. Automatic tool length measurement. Work area mist extraction. TI301 – CNC rotary table (360,000 positions) DS50C-R1-Z. The rotary table can be used as a “C” or “A” axis. Handheld remote control. Rjdpozhwi Asfx Anpow Schunk zero-point clamping system on the rotary table, including two pallets and a 5-axis machine vise.

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 rpm with spindle cooling. X = 1660 Rsdpfx Anozhv Uwjpow Y = 510 Z = 510 1000 kg capacity on the table. Several high-quality vices are included. Weight: 9100 kg BT 40 A few holders are included. Space for 30 tools in the magazine. The machine can be picked up ex-works in week 34 of 2026.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg Rodpezhn Aysfx Anpjw EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 Rsdpfezhat Dsx Anpjw X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Heidenhain CNC control with Siemens motors/servos Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Rjdpfxozg Nmkj Anpjw Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Rjdpozg Drzjfx Anpew Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: excellent (used), Year of construction: 2009, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Mazak VTC 800/30SR CNC Machining Center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC Machining Center Year of manufacture: 2009 Condition: used, good, in production and operational Rodezgxg Tspfx Anpjw Operating hours: 34,000 h Simultaneously controlled axes: 5 Travel in X-axis: 3,000 mm Travel in Y-axis: 800 mm Travel in Z-axis: 720 mm Feed rate X, Y, Z: 50,000 mm/min Rapid traverse rate X, Y, Z: 50,000 mm/min Minimum distance spindle / table: 140 mm Maximum distance spindle / table: 860 mm Table length: 3,500 mm Table width: 820 mm Max. table load: 2,500 kg Swivel range B-axis: +110° / -110° Work table area: Ø 500 mm C-axis: Table rotation 360° Spindle mount: CAT No. 40 Max. spindle speed: 18,000 rpm Spindle power: 35 kW Tool magazine: 48 positions Max. tool length: 350 mm Max. tool weight: 8 kg Max. tool diameter: 80 - 130 mm Machine dimensions: 5,250 x 4,300 x 3,419 mm Weight: 16,800 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Qualitative Machine Benefits Rsdpjzgvk Asfx Anpow • Very good condition! Technical Machine Benefits • Spindle motor power 22/26kw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Rodpfozgvg Rjx Anpow Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Rodpszf T I Nsfx Anpew Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: used, Year of construction: 2009, 2009 OKUMA MILLAC 800 VH Palletised System 5 Axis Machining Centre With OSP P200M Control Redpfx Aszfhudonpew Automatic Pallet Changer (APC) 6-Station Automatic Pallet Pool, Including 4 Additional Pallets. Tool Magazine 120-Station ATC (Automatic Tool Changer). Linear Glass Scales On 'X, Y, Z' axes (In Addition To Standard Encoders). 'A'-Axis Rotary Scale: Circular Glass Scale On Tilting Head Spindle ('A'-Axis), 0.001° Resolution, Equipped With Tilting Brake Clamping. 'C'-Axis Rotary Scale: Circular Glass Scale On Rotary Table ('C'-Axis), 0.001° Resolution, Equipped With Continuous Brake Clamping. Maximum Spindle Speed 10,000rpm (18.5/22 kW Motor), 21 Nm Torque. Spindle Taper BT 50 BIG PLUS. Pallet Dimension 800 x 800mm. Maximum Pallet Load 1,000kg. Axis Travel 'X'=1,020mm, 'Y'=1,020mm, 'Z'=1,020mm. Rapid Traverse 'X'=30m/min, 'Y'==30m/min, 'Z'=30m/min, 'A'=3,600min-1, 'C'=3,600min-1. Cutting Feed 'X, Y, Z'=1-12,000mm/min, 'A, C'=1-2,400°/min. Spindle Nose To Pallet Top (Vertical) -100 To 920mm. Spindle Centre To Pallet Centre (Vertical) -50 To 970mm. Spindle Centre To Pallet Top (Horizontal) 150-1,170mm. Spindle Nose To Pallet Centre (Horizontal) -300 To 720mm. Maximum Tool Ø125mm (Ø200mm Without Adjacent Tool), Maximum Tool Length 400mm, Maximum Tool Weight 20kg. Tool Change Time (T-T) 4.5sec. Power Capacity 60kVA. S/No.143486 (2009/03). With Workpiece Probe: Spindle-Loadable Measuring Probe (From ATC) For Workpiece Zero-Setting & Inspection, Including Macro B Software Option On The CNC. Air Blow System: Spindle Annular Air Blow For Chip Removal & Cone/Flange Cleaning (BT 50 Big Plus). Tool Sensor: BLUM Laser System For Tool Length And Ø Control, Including Pneumatic System For Laser Lens Cleaning. Coolant Through Spindle (CTS): High-Pressure CTS System At 70 BAR (13/18 L/min / 6.9 MPa) With Inline Centrifugal Filter. Spindle Air/Fluid Output: Selectable Air Blow Or Coolant Through Spindle. Shower Coolant: Overhead Shower Wash System. Wash Gun: Coolant Wash-Down Gun Including Dedicated Pump. Chip Conveyor: Drum Filter Type Chip Conveyor With 700L Tank. Oil Skimmer: Installed On The Chip Conveyor. Work Coordinate System Expansion: Expanded To 400 Tool/Workpiece Origins. Tool Offset Expansion: Expanded To 500 Tool Length And Radius Offsets. 3D Tool Radius Compensation: Three-Dimensional Tool Radius Compensation Software. SUPER NURBS Kit: Included (Features: Tool Length Compensation, Vector Control, Lateral Tool Compensation). Data Transfer: DNC-DT Ethernet Software Interface. Programming Functions: Scaling (G50/G51 codes), Mirror Imaging, And Programmable Custom Message Input. Cycle Restart: Sequence Return / Block Restart From Any Interrupted Block. MOP (Machining Operation Monitor): Self-Learning Cutting Load Control/Tool Overload Monitoring. G93 Function: Inverse Time Feed Function. Thermal Compensation: Spindle Tilt Thermal Compensation Software. Overall Dimensions L4,760 x D6,300 x H3,600mm. Weight 22,000kg.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, DECKEL MAHO DMF 220 linear Rodpfozd T T Nex Anpew Machine Type: Vertical CNC Machining Center Manufacturer: DECKEL MAHO Model: DMF 220 linear Control System: Siemens 840D ShopMill Technical Specifications - X-axis travel: 2,200 mm - Y-axis travel: 560 mm - Z-axis travel: 720 mm - Table size: 2,600 × 600 mm - Table load capacity: 2,200 kg - Tool holder: SK40 / HSK-A63 DIN 69893 - Spindle speed: 20 – 18,000 rpm - Feed rate: up to 20,000 mm/min - Rapid traverse X-axis: 100 m/min - Rapid traverse Y/Z-axis: 50 m/min - Tool magazine: 30 positions - Spindle hours: approx. 7,086 h - Idle running hours: approx. 24,652 h - Total power requirement: approx. 70 kVA - Machine weight: approx. 12.5 tons Equipment & Features - Mineral cast machine bed - Chip conveyor with coolant tank - Cooling lubricant unit with compact filter system - AC servo drives on X, Y and Z axes - Hydraulic/mechanical tool clamping - Linear measuring system on all axes

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, Redpfezd Eqasx Anpjw table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 35 kVA, torque: 168 Nm, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 125, Equipment: chip conveyor, Additional features: - B-axis - C-axis Included: - Chip conveyor - Coolant supply - Spindle cooling Available at an additional cost: - 2x IFS 2000 extraction units Disassembly, loading, and transport are the responsibility of the buyer. Rjdpfxezdth To Anpow Sale is limited to within the EU.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Redpozdpqwjfx Anpew Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Rsdpozdkhksfx Anpew Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center - Spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X-axis: 2,500 mm Travel in Y-axis: 620 mm Travel in Z-axis: 500 mm Table clamping area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rodpfx Anezc Rlhjpjw Rapid traverse / Feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine about 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on by appointment. With an X-axis travel of 2,500 mm and a table clamping area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in mechanical engineering, toolmaking, jig and fixture construction, and steel construction. The relatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a long-lasting design. Inspection is possible at any time in Bremen by appointment. _____ Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle operating hours: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Rsdpfx Anozc Rctopow Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 30,000 RPM Spindle speed: up to 8,000 mm/min Spindle operating hours: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on, by arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The relatively low spindle operating hours of only 8,997 hours are particularly noteworthy. The machine features a Heidenhain control system and achieves spindle speeds of up to 8,000 RPM. The HEDELIUS C50 stands for high precision, stability, and reliability “Made in Germany” and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and approved for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to businesses and without warranty.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Rjdpfx Anezc D Enopsw Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Redpfxozc D D Rs Anpjw Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Rodpfx Aozc D Atenpjw Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.