Siegmund Pietras GmbH

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m Bedpfx Afjyli Sfecjcw

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Bjdpfx Afsygvtxjcjcw Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1974, machine/vehicle number: 571, Offer 25456 Technical Data: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - 8 spindle speeds: 100 – 1120 rpm Bcedpfx Asyfn Npjfcjw - Table area: 400 x 400 mm - Drilling unit height adjustable via handwheel - Minimum / maximum distance table / drill-milling spindle: 300 / 600 mm - Drilling spindle stroke: 120 mm - Drilling spindle outreach: 260 mm - Coolant system - Machine base cabinet with door - Drive: 400 V / 1.5 / 2.3 kW - Space requirements approx.: W 500 x H 1800 x D 950 mm - Weight approx.: 200 kg

Condition: good (used), Description: Bodpfx Afsx U Agcjcjcw Robust industrial pillar drill manufactured in the Soviet Union. The STANKO 2H118-1 is designed for workshop use and is suitable for drilling, boring, countersinking, as well as basic thread cutting operations. Exceptionally heavy-duty construction, mechanical gearbox, and long-lasting design. Technical Data (typical version) - Drilling capacity in steel: approx. 23 mm - Spindle taper: Morse taper MT2 - Spindle speeds: 9 steps - Speed range: approx. 90 – 1,400 rpm - Feed: manual - Feed stages: mechanical selection - Motor power: approx. 1.5 – 2.2 kW - Connection: 380–400 V / 50 Hz - Clockwise/Counterclockwise rotation: yes - Spindle brake: mechanical - Depth stop: available - Machine weight: approx. 400 – 500 kg (estimated) - Space requirement: approx. 700 × 800 × 2,100 mm Equipment: - Mechanical gearbox - Solid machine table - Depth stop with scale - Tool ejector - Main switch Condition: The machine is used and shows age-appropriate signs of use. Functionality checked. Visual signs of wear are present, technically solid.

Condition: excellent (used), functionality: limited functionality, input voltage: 230 V, spindle mount: MK 2, drilling depth: 100 mm, height adjustment type: mechanical, table width: 450 mm, table length: 315 mm, drilling capacity: 20 mm, column diameter: 90 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 100 rpm, spindle stroke: 100 mm, Equipment: rotational speed infinitely variable, Maxion Unimax 2 Pillar Drilling Machine Very good condition Spindle speed steplessly adjustable, speed adjustment via potentiometer Spindle taper MK 2 Table adjustment via rack and pinion with worm gear Power connection 230V Continuous drilling capacity in E 335: 18 mm Standard drilling capacity: 20 mm Drilling depth: 100 mm Spindle to table: 55 to 880 mm Table size: 450 x 315 mm Column diameter: 90 mm Overall height approx. 1750 mm Weight approx. 170 kg Bodex R Dmvjpfx Afcocw Motor with frequency control, 1.5 kW Right-/left rotation Drilling range A: 100 - 2,000 rpm Drilling range B: 200 - 4,000 rpm Machine can be tested on site. Shipping can be arranged.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From company liquidation: Gillardon GB 30 V Year of manufacture: 1985 Bjdpfx Afjx Ncfhocjcw Automatic feed: 0.1/0.16/0.25 mm Stepless speed range from 60–1600 rpm 2-speed motor Work light 170 mm quill stroke 2900 mm reach Table size 480x560 mm – clamping surface 350x440 mm MT 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very quietly and precisely + vices included

Condition: good (used), Year of construction: 1994, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From business liquidation: Gillardon GB 30 V Year of manufacture 1994 Automatic feed 0.1/0.16/0.25 Infinitely variable speeds from 60–1600 rpm RPM counter 2-speed motor Work light 170 mm quill stroke 2900 mm arm reach Table size 480x560 mm – clamping area 350x440 mm MK 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very smoothly and precisely + vise Bcodox I A Iaepfx Afcow

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm Bcedpfex Iwgksx Afcsw dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting Bcjdpfxjx Hh Dwo Afcew - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Bcsdpfx Afoxx Tkwjcew Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Condition: new, Year of construction: 2025, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 30 m/s - colour: RAL 9007 - belt motor: 400 V 3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm Bcodpfjxwph Aex Afcjw - weight: 105 kg

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Year of manufacture: 2002 – workshop tested Machine no.: 201835 Spindle speed (stepless): Range A 80 – 1,440 rpm Range B 180 – 3,200 rpm Normal drilling capacity: 30 mm Spindle taper: MK 3 Standard equipment includes: Bcodpfx Ajxr Da Aefcjw - Full motor protection - Reversing switch for right/left rotation - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Used as seen, without warranty. The machine corresponds technically to the state of the art at the time of manufacture.

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch Bjdpfxexq Rwfj Afcecw – 40V

Condition: used, bore capacity in steel (diameter) / mm throat / mm Bsdpfxjxqrhfj Afcjcw bore stroke / mm total power requirement / kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, Column drilling machine, make SERRMAC. Very good condition. Fully functional. Bedsxgdtxopfx Afcocw

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Bcsdpfexgdn Ajx Afcsw Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Bcedpfx Afoxd Tt Aocew Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: good (used), Stock no.: 3017 Column Drilling Machine Bjdpfxsxdknds Afcscw Brand: Gillardon Machine no.: 0150352 Model: GB20 Spindle mounting: MT 2 Table size: 430 x 380 mm Clamping surface: 355 x 305 mm Table adjustability: 600 mm Throat: 280 mm Stroke: 120 mm Speed range: 60 to 1,400 rpm, stepless Footprint: 360 x 570 mm Column diameter: 100 mm Connection: 0.5 and 1.0 kW Weight: t Dimensions: 430 x 800 x 1,800 mm

Condition: used, Spindle holder MK 3 Bjdpfx Afjxc Hihocjcw Drilling capacity in steel: 23 mm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Gewindeschneideinrichtung Bcjdpfexcg Ecjx Afcsw Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, bore capacity in steel (diameter) 20.0 mm bore capacity in cast iron 25.0 mm throat 210 mm bore stroke 100 mm turning speeds 240 - 3800 U/min Bcjdpjxacbzjfx Afcow table-size 300 x 425 mm morse taper MK 3 total power requirement 0.6 / 1.2 kW weight of the machine ca. 300 kg range L-W-H 500 x 700 x 1750 mm Machine from a vocational school (!!) - in checked condition - machine video - ?v=WGhTKBNBT2E Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Size of table plate 415 x 385 mm Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots Bjdpfexabbyox Afcocw - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: ?machineno=1008-9103760

Condition: new, bore capacity in steel (diameter) 28,0 mm threading 12 M bore stroke 130 mm throat 250 mm table: 375 x 375 mm morse taper 3 MK turning speeds 75 - 3.200 U/min total power requirement 1,1 / 1,5 kW weight of the machine ca. 215 kg. range L-W-H 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 Bjdpfx Afsxaa T Iocecw - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Model: AB 3/ES Year of manufacture: 1987 - workshop tested Machine no.: 23348 Bjdjw Id Uaspfx Afcocw Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions

Condition: used, Year of construction: 1995, Alzmetall AC25 / AS. Year of manufacture: 1995. Bcedjwwmkqepfx Afcsw