Frank Klösters Maschinenhandel

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Fodpfexl R N Dex Afpogh Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: good (used), functionality: fully functional, Brand – Fexac (Spain) Model – UP Fodpfx Afsxg Tkaopogh Table dimensions – 1100 mm x 240 mm XYZ travels – 800 mm x 210 mm x 400 mm Spindle speeds – 48 rpm to 1500 rpm Spindle taper – ISO 40 Table feeds – 11 mm/min to 500 mm/min Machine dimensions: height: 1700 mm x length: 1600 mm x depth: 1700 mm weight: 1500 kg

Condition: good (used), functionality: fully functional, Spindle mount: ISO 30 Speed range: approx. 70 – 2500 rpm Fgjdpfx Afexg Ih Hjpeh Spindle head swivels in 2 directions automatic drilling feed Table: Dimensions: approx. 1070 x 230 mm Longitudinal travel (X): 850 mm Cross travel (Y): 370 mm Vertical travel (Z): 400 mm T-slots: 3 units, 16 mm wide automatic feed and rapid traverse on X-axis dimensions: length 1700 mm x height 2150 mm x depth 1700 mm weight approx. 1300 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, quill stroke: 100 mm, quill travel distance: 100 mm, total height: 2,120 mm, total width: 2,220 mm, total length: 2,150 mm, overall weight: 2,550 kg, As-new Emco FB6 milling machine (conventional) for sale. We purchased the machine in 2018 from a training workshop and have used it for only about 15 hours since then. (We acquired a 5-axis machining center for angular work...) We are selling the machine due to lack of space. The machine is in perfect condition and ready for immediate operation. Age-appropriate signs of use. The machine was manufactured in 2011. All technical details can be found in the attached photo. All tool holders shown in the photo are included, excluding the rack and the collets installed in the machine. The dividing head on the table is not included either. Fgjdpfexga Sdex Afpsh You are welcome to inspect the machine. For buyers from Switzerland, 8.1% VAT will be added to the price.

Condition: excellent (used), Used TOS metal milling machine, model FNK 25. The machine is in good technical condition and ready for operation. It is equipped with numerous functions that enable precise machining of various materials. This milling machine is a solid choice for workshops or hobbyists seeking a reliable tool for metalworking. Loading of the machine on site is provided. Table: 1250 x 250 mm - Working travels: - X axis: 800 mm - Y axis: 350 mm - Z axis: 420 mm - Spindle taper: ISO - 40 - Spindle speed range: 56 – 4,500 rpm - Maximum workpiece weight: 200 kg - Motor power: 3.5 kW - Dimensions (L x W x H): 2650 x 1980 x 2260 mm Fedpfjxfwkzex Afpegh - Machine weight: 1,760 kg

Condition: excellent (used), functionality: fully functional, Dufour milling machine Fgedpfx Aoxd Dbkjfpsh

Condition: excellent (used), functionality: fully functional, Type: Milling machine Manufacturer: Reiden – Made in Switzerland Model: RT 70 RCA Year of manufacture: 1987 Conventional control unit The machine comes from first ownership, a German company. Accessories: as per photos Machine weight approx.: 2 t Approx. machine dimensions: 150x150x150 cm Complete documentation is available. Inspection under power can be arranged at short notice. Please do not hesitate to contact us with any further questions. Pricing ex stock here, plus VAT. Condition: good – operational/demonstration ready Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Prior sale and errors excepted. Fsdpjxcw T Defx Afpjgh We look forward to receiving your order. Additional machines and equipment available from stock – please inquire. We look forward to your inquiry. Type: Thread rolling machine Manufacturer: Thommen – Made in Switzerland Model: RT 70 RCA Year of manufacture: 2004 Bosch control unit Machine has just arrived. The machine has an electronic fault. Therefore, the machine is offered as needing repair. The machine comes from first ownership, a German company.

Condition: good (used), Year of construction: 2000, feed length X-axis: 800 mm, MAHO 800 P Tool Milling Machine Hydraulic tool clamping Company liquidation, large selection of machines, equipment, cutting tools, tool holders, vises Please contact by phone, I do not reply to OLX messages Net prices, open to reasonable negotiation 1. Bench drill 2. Jungner grinder 3. SPC 20 grinder 4. Surface plate (table) 800x500 5. Maho 800 6. 2D indexer Ø 300 7. 3D indexer Ø 300 8. Height gauge Tesa 700 9. Charmilles 200 sinker EDM 10. Charmilles Drill 11 EDM hole drilling machine 11. Steel saw Fgsdpfx Asxbm Ubofpeh

Condition: new, x-travel 600 mm y-travel 250 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1120 x 260 mm feed: 24 - 402 mm/min. turning speeds 45.0 - 1660 U/min distance spindle /table 175 - 520 mm rapid traverse Z Achse 660 mm/min throat 0 - 550 mm total power requirement 2.2 kW weight of the machine ca. 1380 kg range L-W-H 1570 x 1470 x 1660 mm Fgsdpfoxaa Hzox Afpeh Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes included in delivery Scope of delivery - 3-axis digital display ES-12 H with LCD display - LED machine light - Coolant system - Central lubrication - Counter bearing - Long milling mandrel 32 mm - Feed for x and y axes - Positioner motor for z-axis - Coolant pan - Adjustable protective device - operating tool

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery Fedpfsxaak Tox Afpsgh - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 320 mm feed: H 80 - 830 / V 23-625 mm/min. turning speeds H 35 - 1500 / V 45 - 1660 U/min distance spindle /table H 30 - 430 / V 210-610 mm rapid traverse Z Achse 750 mm/min throat 305 - 805 mm T-slots 3 x 14.0 mm table - swivable ° workpiece weight max. 300 kg coolant pump 25.0 L/min. total power requirement 7.6 kW Fgjdpfx Afoxaagnspoh weight of the machine ca. 1540 kg range L-W-H 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: used, Year of construction: 1980, functionality: limited functionality, Tool milling machine MAHO 800 P hydraulic tool clamp milling head with quill feed Fgedpfxow Svmvo Afpsh

Condition: good (used), Year of construction: 1970, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 300 mm, feed length Z-axis: 400 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 45 rpm, total height: 1,630 mm, total width: 1,300 mm, total length: 1,450 mm, table width: 300 mm, table length: 1,300 mm, table height: 900 mm, type of input current: three-phase, rotational speed (max.): 1,000 rpm, rotational speed (min.): 45 rpm, table load: 300 kg, overall weight: 760 kg, input voltage: 380 V, distance table to spindle center: 150 mm, space requirement width: 1,800 mm, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 6 A, input frequency: 50 Hz, Machine type: Universal manual knee-type milling machine - Brand / Model: ACESA CEA-M6 - Origin: Spain - Year: Not specified (likely between 1970 and 1990) Fgsdpfx Asw I Smkjfpoh Table: - Approximate dimensions: 1300 x 300 mm Travels: - X-axis: ~ 800 mm - Y-axis: ~ 300 mm - Z-axis: ~ 400 mm Headstock: - Universal, swiveling head for both vertical and horizontal milling - Spindle taper: ISO 40 (common for this model) - Spindle speeds: 9 mechanical ranges (45 – 1000 rpm) according to the speed chart on the housing - Feeds: Manual on all axes (possible longitudinal automatic feed on some models) Main motor: - Power: ~ 3 HP (2.2 kW) - Voltage: 380 V three-phase - Weight: Between 1200 and 1500 kg Typical use: General machining, manufacturing of single parts or small series.

Condition: good (used), Universal Milling Machine MAHO MH 800 - Travel (X/Y/Z): 700-350-450mm - Table clamping surface: 940x510mm - Spindle taper: ISO 40 - Spindle speeds: 32-1600 rpm Fgodpfx Aow I Rz Tefpeh - Automatic longitudinal / cross feeds - Automatic feed / vertical milling head - Coolant system - Various toolholders - FURTHER TECHNICAL DATA / See photo Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight 3500 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1964, Manufacturer: Grupp, model UF2, serial number: 448, year of manufacture: 1964, speed range: 45–2,000 rpm Fjdpfew Hdufex Afpegh

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted Fgodpfxew Ebhmo Afpoh - Documentation Condition: good, workshop-tested

Condition: good (used), For sale is a robust and high-performance universal milling machine from DECKEL, model FP33. This machine impresses with its high stability, generous travel distances, and SK50 tool holder—ideal for workshops, maintenance, or manufacturing operations with demanding requirements. Technical data: Manufacturer: DECKEL Model: FP33 Tool holder: SK 50 Travel (axis):  • X = 990 mm • Y = 390 mm • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1,600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3,300 x 2,500 x 2,000 mm ⚙️ Condition & notes: Good overall condition (further details on request) Fjdsw D Rwuspfx Afpegh Delivery: Loading onto truck possible Inspection possible by appointment

Condition: good (used), Type / Model: F 0 Travel paths x-y-z: approx. 700 - 260 - 280 mm Table: 1,000 x 250 mm Speed range: 50 to 1,250 rpm Spindle taper: SK40 Fgodpfswypihex Afpjh Feeds: only x-axis automatic Connection: Accessories/Equipment: vertical head Condition: good Weight: 1.15 t Dimensions: 1,400 x 1,200 x 1,500 mm

Condition: good (used), Tool milling machine / DECKEL FP 2 LB - 3-axis Heidenhain digital readout - Travel X/Y/Z 800x300x400 mm Fgjdpowxb Rnsfx Afpjh - Automatic feeds 10-500 mm/min - Rapid traverse on all three axes / 1.5 meters/min - Worktable 1100 x 440 mm - Spindle speeds 40 - 2000 rpm - Tool holder ISO 40 - Vertical sliding head - Horizontal / vertical / milling spindle - Coolant system - Documentation Dimensions: LxWxH 1.8 x 1.7 x 1.7 meters / Weight: 1800 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 Fgodpfewwwqhjx Afpjh tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display with scales is defective. Extra interchangeable milling head. No accessories.

Condition: used, Year of construction: 2005, Control TNC 310 range L-W-H 2000 x 2000 x 2000 mm weight of the machine ca. 2,0 t Kunzmann universal milling and drilling machine WF 4/3 Milling machine - equipped with a Heidenhain TNC 310 control system The milling and drilling machine allows a variety of machining options, e.g. milling, drilling. The materials to be used are preferably those commonly used in mechanical engineering, such as steel, cast iron and aluminium. Materials such as paper, graphite, minerals or magnesium cannot be machined or can only be machined with the appropriate protective equipment. --> Technical data Milling table: --> Clamping surface: 650 x 350 mm --> Clamping grooves: 5 --> Slot width: 14 mm --> groove spacing: 63 mm --> max. load: 250 kg --> Working area --> X-axis: 400 mm Fedpfx Afswwl Inopogh --> Y-axis: 350 mm --> Z-axis: 400 mm --> Maximum distances --> Top edge of table to horizontal spindle centre: 540 mm --> max. table top edge to vertical head bottom edge: 430 mm --> Milling spindle --> Tool holder: SK 40 --> Horizontal speeds: 5 -4500 min/-1 --> Vertical speeds: 5 -4500 min/-1 --> Vertical quill stroke: 60 mm --> Vertical head can be swivelled on both sides: 90° --> Feed (potentiometer 100 %) longitudinal and transverse: 0 - 2000 mm/min. --> rapid traverse lengthwise and crosswise: 5000 mm/min. --> Vertical feed: 0 - 2000 mm/min. --> Vertical rapid traverse: 4000 mm/min. --> Drive power --> Power at 100 % ED: 8.0 KW --> Power at 44 % ED (cycle time 5 min): 9.3 KW

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard Fgedpowtnxnofx Afpoh

Condition: used, Year of construction: 1980, Technical details: x-travel: 820 mm y-travel: 300 mm z-travel: 485 mm spindle taper ISO: SK 40 spindle head swivable left - right: 0 - 45° rechts/links ° quill travel: 80 mm range of revolution per miute: 56 - 355 und 450 - 2800 U/min feed:: X/Y: 10 - 80 und 80 - 630 mm/min rapid traverse : X/Y: 3150mm mm/min Table dimensions: 1700 x 400 mm table surface area: 1120 x 205 mm total power requirement: 7,5 kW kW machine weight approx.: 2120 kg dimension machine xH: 1,7 x 1,7 x 2.5 m additional features: -Table adjustment via machine see X/Y and Z data Fgedpowtct Tefx Afpsh -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates *

Condition: good (used), Table 1300 x 325 mm Longitudinal stroke 900 mm Cross stroke 300 mm Vertical stroke 565 mm Horizontal spindle axis: 570 mm Spindle axis: 330 mm Maximum cutter diameter on spindle: 348 mm Number of speeds: 16 Speed range: 24/1500 Number of feeds: 18 Weight: 2500 kg Fgsdpewq Na Uofx Afpjh Dimensions: 2240 x 1820 x 2065 mm

Condition: used, Year of construction: 1992, x-travel 500 mm y-travel 400 mm Fedowqr Etopfx Afpsgh z-travel 400 mm turning speeds 50-2500 U/min total power requirement 9,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 2,5 x 2 m --> Technical data Working range: --> motorised/v. manual --> X-axis longitudinal: 490/500 mm --> Y-axis transverse: 390/400 mm --> Z-axis vertical: 385/400 mm --> Z-axis quill stroke: 90 mm --> Vertical milling head can be moved manually on spindle block: 150 mm --> Main drive: --> Pole-changing three-phase brake motor and manual gearbox with clockwise/ anticlockwise rotation Rated power (ED 100/60%) 3.7/4.4 kW --> Speed: 1425/2890 min-¹ --> 18 working spindle speeds: 50-2500 min-¹ --> Step change: 1.25 --> Tool holder: SK 40 (M 16) --> Feed drive: --> Pole-changing three-phase motor and manual gearbox Rated power (ED 100/60%) 0.8/1.2 kW --> Speed: 1420/2780 min-¹ --> 18 feed speeds: 8-630 mm/min --> rapid traverse speed: 1300 mm/min --> Traverse path per handwheel revolution: --> X-axis: 4.0 mm --> Y-axis: 2.5 mm --> Z-axis: 2.5 mm --> Table slide: --> clamping surface: 274 x 842 mm --> Number of T-slots: 4 --> permissible load: approx. 600 kg