Hezinger Maschinen GmbH

Condition: used, Year of construction: 2007, Bending length 3050 mm Max. prebending capacity 13 mm Max. rolling capacity 16 mm Top roll dia. 340 mm Lower roll dia. 340 mm Side rolls dia. 240 mm 4-rolls Fully hydraulic Fgsdpfxoxhgqio Afpsh Hydraulic drop end Digital read out of roll positions Equipped with: Top support Side support

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Fgodpjxgqddjfx Afpoh Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, working width: 2,050 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 38.5 kW (52.35 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly via hydraulic cylinders attached to the body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * Three digital displays allow easy reading of roll positions * Hydraulic opening head and automatic lifting shaft enable easy removal of the bent workpiece * Easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system Fgjdpfxsxd S T Uo Afpeh * Electronic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, working width: 2,050 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, power: 16.5 kW (22.43 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The top, lower, and side rolls move vertically via pistons hydraulically connected to the body. * Protected against overload. * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven). * The positions of the rolls can be easily read from three digital displays. * The hydraulically opening head and the automatically rising shaft allow easy removal of the bent workpiece. * User-friendly operation with mobile control panel. * Welded steel construction body. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic synchronization system (Ø500-550-580-620 -680). * Dual speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) for support during large diameter bending. * Hydraulic side supports for large diameter bending. * Hydraulic sheet ejection system. * Ground and polished rolls for special applications. * Stepless speed regulation system. * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Fgjdoxd S Npspfx Afpeh Bending Length: 2050 mm Pre-Bending: 12/16 mm Bending: 16/20 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8550 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum or stainless steel materials Ideal for bending materials into round and various diameters Bottom roll and side rolls move directly up and down hydraulically via linear movement Protected against overloading Top roll is driven by an electric motor and planetary gearbox. Bottom roll driven by cardan coupling system. Two rolls are drive rolls Fodpfxjxd S Aij Afpsgh Roll positions can be easily read from three digital displays Hydraulically operated openable head allows easy removal of the bent workpiece Very easy to use with movable control panel Welded steel construction body SAE 1050 (CK 45) induction hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety standards and CE marked Operation manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (hoist) for supporting large diameter bending Hydraulic side supports for assisting with large diameter bending Ground and polished rolls Dual-speed adjustment system Stepless speed regulation Return rotation driven by hydromotor Ejector system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending Thickness: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3500 mm Width: 1500 mm Height: 1370 mm Weight: 4650 kg

Condition: good (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 884261, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller length: 3,000 mm, sheet thickness stainless steel (max.): 6 mm, input voltage: 400 V, Equipment: documentation/manual, foot remote control, hardened rollers, 1 side support Fedpfoxc Itbsx Afpogh 1 height support

Condition: ready for operation (used), functionality: fully functional, number of rollers: 3, working width: 2,500 mm, sheet thickness steel (max.): 8 mm, Used Roundo plate rolling machine 2500x8MM, 3 rolls, fully functional Fgsdpfx Afjxcgrvjpjh

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT Fodpfxexbzr Ue Afpegh * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts Fgodpoxbzptjfx Afpoh * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: used, functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: DAVI GENIUS, number of rollers: 4, roller (bottom) diameter: 170 mm, roller (top) diameter: 190 mm, side roll diameter: 130 mm, roller diameter: 190 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 3,000 kg, total length: 3,500 mm, total width: 950 mm, total height: 1,450 mm, power: 4.5 kW (6.12 HP), input voltage: 380,440,480 V, input frequency: 5,060 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, DAVI 4 ROLL 2000X8 MM MODEL MCB2019/S _CNC GENIUS -YEAR 2006 MACHINE USED IN GOOD WORKING CONDITION Capacity: -Width of plate: 2000 mm -plate rolling thickness 8 mm -plate pre-bending thickness 6 mm Rollers surface length 2050 mm upper roll 190 mm pinch roll 170 mm side rolls 130 mm Configuration installed: Fjdpoxa Hd Hjfx Afpsgh Surface hardening of the four rolls Conical bending hydraulic attachment - hardened contrast pad. Central rollers powered driven rotation with gear unit & hydraulic motor individual Calibration system for re-rolling of welded shells rounding. Console electric centralized commands joysticks with screen readout CNC DAVI GENIUS Opening front side hydraulic drop-end to unload closed shells. Variable speed or rolling Safety installation with emergency stop. CNC controller Davi Genius , programmable for automatic plate roll. digital readout of the 4 roller on screen for manual rolling by the operator. Dimension 3500x950 x H 1450 mm - weight 3 ton Voltage 380 / 415/440/480 Vac - Hz 50 / 60 User manual, service manual, cnc manual, with the machine

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW Fedpfxsxau D Io Afpogh

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3600 mm Max. bending capacity: 95.0 mm Top roller diameter: 950 mm Lower roller diameter: 740 mm Hydraulic folding bearing Control panel with digital display Motor power: kW Dimensions (Length x Width x Height): approx. 5300 x 1200 x 1750 mm Weight: approx. 165 tons Fjdpfx Afow Suw Hjpjgh Accessories: Second top roller diameter 900 mm Upper bending aid

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. Fjdpjw Smfcjfx Afpogh * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Fgedpfow Smdfex Afpeh Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts * Cone bending system * Centralized lubrication system Fgodpfsw Smc Ijx Afpsh * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system Fgedpfew Smb Rjx Afpjh * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system Fedpfxjw Sl T Sj Afpegh * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed Fsdpfx Asw Sl I Njfpsgh * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,050 mm, sheet thickness (max.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Folded parts are easily removed thanks to the hydraulically opening head * Very easy to operate with movable control panel * Lower roll positions are easily read via two digital indicators * Welded steel body construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-supported conical bending system * Hydraulic balancing system ensures parallel movement of shafts * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Upper crane (hoist) for support in large diameter bending * Hydraulic side supports for assistance in large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Fgedpfxjw Slg Se Afpeh Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Fgsdpfxow Slf Ue Afpsh Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 3,100 mm, sheet thickness (max.): 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls driven by hydromotor and planetary gearbox * Hydraulically opening head for easy removal of bent parts * Very easy operation with mobile control panel * Lower rolls positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile- and pipe-bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Infinitely adjustable hydraulic speed control * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 10/13 mm Fjdpfx Aow Sld Refpegh Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm MACHINE DETAILS Fgodpsw Eh Hvjfx Afpsh Total power requirement: 45 kW Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: RB3 L CNC-S, Thoman Profile Bending Machine RB 3L CNC-S – CNC-Controlled Precision Bending Machine For sale is a high-quality profile bending machine from the manufacturer Thoman – Model RB 3L CNC-S. This machine is ideal for precise bending of profiles, tubes, and flat materials in a wide variety of radii – suitable even for repeat-accurate series production, thanks to its CNC control system. Technical Data (excerpt): Manufacturer: Thoman GmbH Model: RB 3L CNC-S Control: CNC-controlled (fully automatic bending sequences can be programmed) Number of bending rolls: 3 Fgedpfxow D Ruye Afpjh Drive: Hydraulic / Servo (depending on configuration) Bending direction: Horizontal + Vertical Availability: available immediately Condition: used, operational, well-maintained Features: - Robust industrial-grade construction - Precise reproducibility enabled by CNC control - Specially suitable for complex bending geometries - User-friendly control with program storage - Ideal for steel construction, metal fabrication, railing production, or contract manufacturing Including various accessories (measuring gauge, various bending rolls and spacer rings, and workshop trolley) The machine is in like-new condition. It was purchased for a project that was ultimately not realized. If interested, feel free to get in touch. Inspection possible at short notice by arrangement.

Condition: excellent (used), Year of construction: 2003, Technical data: Working width: 3250 mm Max. bending capacity (mild steel): 14.0 mm Max. prebending (mild steel): 12.0 mm Top roll diameter: 290 mm Side lower roll diameter: 270 mm Central lower roll diameter: 210 mm NC control Cone bending device Mobile control panel Hydraulic drop-end bearings CE mark Motor power: 7.5 kW Dimensions (length x width x height): approx. 4600 x 1550 x 1550 mm Fedewt Uq Rspfx Afpegh Net weight: approx. 10.5 tonnes The seller accepts no liability for typing or data transmission errors. The machine’s condition regarding appearance, technology, and wear corresponds with its age; used machines are sold without any guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Weight 7,100kg Fsdswtp Haopfx Afpogh