Regensburger Schweisstechnik OHG

Condition: used, Year of construction: 1970, This Messer Griesheim welding machine, type: US150E500, will be auctioned off online in our industrial auction / machine auction organized by Kusch+Co GmbH – including spray booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. You can find this and many other items on our platform. Kodpfozfic Nox Anwjdn

Condition: used, Year of construction: 2006, functionality: fully functional, welding current (max.): 500 A, Equipment: type plate available, For sale: a modular, twin-torch MIG/MAG welding machine (two power sources + welding head) – MSA-4 Multizas 500. Kjdpfx Aozd U Syonwedn Technical data: - Year of manufacture: 2006 - MIG/MAG welding current: max. 2 x 500 A, duty cycle = 80%, 32/49 V; 400 A, duty cycle = 100%, 32/40 V - Power consumption: 500 A, 22 kW - Output operating frequency: 10.5 kHz - Wire diameter: 0.8 to 2.0 mm - Welding speed: 15 to 80 cm/min - Protection rating: IP22

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: Kdedpfszd Rmgex Anwjn - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, welding current at 60% duty cycle: 370 A, welding current at 100% duty cycle: 300 A, welding current (max.): 400 A, Equipment: documentation/manual, type plate available, Migatronic Sigma One 400 C, water-cooled Kodpezdkudofx Anwsdn 3 years old, barely used.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: air, hose package length: 5,000 mm, welding current (min.): 40 A, welding current (max.): 250 A, Rowac KGL 250-2 – Gas-cooled MIG/MAG Transformer Welding Machine Refurbished, serviced, tested, and ready for immediate use. Please note: This is a trade-in. Kodpozdaprjfx Anwjdn Specifications: 250 AMP 380 Volt 2/4 cycle 10-step adjustable Spot welding Interval welding Includes: 3-metre welding torch, earth cable with clamp, gas hose, and 5-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ESAB Alpharex AXD 5 axis Gantry Laser- 5KW Trumpf Resonator- Year 2007. Ksdpfx Aozc Nzuonwsdn 26 metres x 5900mm Table. Bevel cutting. Max 25mm Thickness.

Condition: used, 1 unit MIG/MAG gas-shielded welding and soldering system GYS T3GYS AUTO with various accessories Color: as shown in the pictures, according to the images and inspection Condition: used Location of the goods: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location. Kdsdpfx Anjzcmazjwsn

Condition: used, 1 unit ESAB MIG 505W welding machine Kdedpfx Anszclw Sowjn Color: as shown in the pictures, see pictures and inspection Condition: used Location of goods: production hall Payment method: prepayment by bank transfer Shipping: pick-up only at the Coburg location

Condition: like new (used), Year of construction: 2017, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2014.15.P1272 PCCB.98.F, type of input current: three-phase, input voltage: 400 V, type of cooling: air, welding power (max.): 13 kVA, open-circuit voltage: 86 V, welding current at 100% duty cycle: 220 A, protection type (IP code): IP21, welding current (max.): 300 A, input frequency: 50 Hz, continuous power (apparent): 9 kVA, Equipment: type plate available, We offer a practically new, rarely used welding machine (80 hours of operation): Orbitalum ORBITAMAT 300 CA AC-DC Orbitalum 300 CA (cooling unit included), Splitter for operating 2 welding heads, ORBICAL S trolley, production year of the above-mentioned equipment: 2017, Remote control included for working at height, which improves operation with the welding heads. (Rated supply voltage: 3×400 V Frequency: 50/60 Hz Welding current at 40% duty cycle: 300 A Welding current at 100% duty cycle: 220 A Open-circuit voltage (U0): 86 V Arc voltage at 100% duty cycle (U2): 22 V Kedpjzclw Ejfx Anwodn Arc voltage at 40% duty cycle (U2): 18 V Apparent power S1 (100%): 9.0 kVA Apparent power S1 (60%): 13.5 kVA Protection class: IP21 Insulation class: F Cooling: AF Standard: EN 60974-1) Included (possibility to sell individual items) Welding head, manufacturer: Orbitalum, type/model: TP 600 KD, serial number: 717, production year: 2018, diameter: 70 – 170 mm + ground cable. Welding head, manufacturer: Orbitalum, type/model: OW 19, serial number: 1316, production year: 2017, diameter: 3 – 19 mm - NEW - unused, as shown in the picture. Set of plugs, manufacturer: Orbitalum, type/model: Orbipurge 12-110 - 2 sets or more. We have a lot more items from ORBITALUM, most of which are practically new, from a company liquidation in Poland. Closed welding heads 115, 76, 19, plus aluminum inserts, facing machines 8.6 and 2.5, orbital saw GFX 3.0, tripods, gas control devices Cloops CPSC 185, articulated videoscope 7.5 m IRIS 46-75 DVRX, all at attractive prices, VAT invoice available. Significant discounts for purchasing larger quantities of equipment. The equipment can be inspected in person in Rzeszów, Podkarpackie Voivodeship, and shipping is possible throughout Europe. If you have any questions or require additional information, please send a message or contact us by phone (Polish - English).

Condition: good (used), Year of construction: 2008, Inverter welding machine, power source, digital control inverter -Manufacturer, Type: OTC DAIHEN, DP-500 -Welding current range: 500A 60%, 350A 100% Kjdpfx Aszck Rdenwodn -Mains connection: 400 V -Software version: P10499 Ver003. 200,000 Accessories: as shown in the pictures -Dimensions: 700/300/H600 mm -Weight: 57 kg

Condition: ready for operation (used), Year of construction: 2022, Excellent condition – from 2022-2023 (we have a total of 10 units). Kdjdpfjzb Rf Sox Anwen Inspection welcome.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser Kjdpszb Nl Rjfx Anwedn BLT laser welding device PenWelder Laser beam delivery cable Connection cable Contact tips and guide rail Configurable access control OPC-UA interface Remote service

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, electrical fuse: 35 A, welding current at 60% duty cycle: 420 A, welding current at 100% duty cycle: 360 A, input current: 44 A, protection type (IP code): IP23, welding current (min.): 10 A, welding current (max.): 500 A, input frequency: 60 Hz, We are offering this new Fronius TransSteel 5000 PULSE welding machine. Manufacturer: Fronius Model: TransSteel 5000 PULSE Part number: 4.075.229 Serial number: 31239039 Standard: IEC 60974-1/-10 Cl.A Protection class: IP 23 Rated input voltage: 380/400 V Alternative input voltage: 460 V Mains frequency: 50-60 Hz Mains current I1 max (380/400 V): 44 A Mains current I1 eff (380/400 V): 28 A Mains current I1 max (460 V): 38 A Mains current I1 eff (460 V): 24 A Fuse size: 35 A Welding current range: 10–500 A Welding voltage range: 14.5–39.5 V Duty cycle 40%: 500 A Welding voltage at 40% duty cycle: 39.0 V Duty cycle 60%: 420 A Welding voltage at 60% duty cycle: 35.0 V Kedpfszbvp Nex Anwedn Duty cycle 100%: 360 A Welding voltage at 100% duty cycle: 32.0 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Kdjdpezamffjfx Anwsn Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 150,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Kdedpfxszaktaj Anwen Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Kdsdpfszakr Aex Anwen The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: water, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use Kodpfszakrvsx Anwjdn 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Kodpfx Aney U Izfewjdn

Condition: new, functionality: fully functional, type of input current: three-phase, total height: 575 mm, total width: 300 mm, total length: 600 mm, input voltage: 400 V, overall weight: 39 kg, type of cooling: air, electrical fuse: 32 A, sheet thickness aluminum (max.): 8 mm, welding power (max.): 13 kVA, open-circuit voltage: 70 V, welding current at 60% duty cycle: 280 A, welding current at 100% duty cycle: 250 A, input current: 15 A, protection type (IP code): IP23, welding current (min.): 300 A, welding current (max.): 10 A, Professional inverter TIG/MMA welding machine LogiTIG 300 AC/DC for sale. Suitable for welding aluminum, stainless steel, and mild steel. The machine supports TIG AC/DC and MMA modes, and features HF ignition, pulse function, 2T/4T modes, adjustable AC frequency, and balance control. Kedpfx Ajy U E Rwenwjdn This unit offers a high duty cycle of up to 300 A, making it suitable for professional and industrial applications. Compatible with foot pedal and remote control connections.

Condition: new, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total height: 435 mm, total width: 200 mm, total length: 485 mm, input voltage: 400 V, overall weight: 17 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 10 kVA, open-circuit voltage: 90 V, welding current at 60% duty cycle: 240 A, welding current at 100% duty cycle: 210 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 280 A, input frequency: 60 Hz, continuous power (apparent): 10 kVA, The Merkle MobiARC 284 CEL is a professional, inverter-based MMA/LiftTIG welding machine. It is suitable for use with cellulose electrodes and features Hot Start, Arc Force, and Anti-Stick functions. It is compact, portable, and designed for professional applications. Voltage: 3 x 400 V Frequency: 50 / 60 Hz Data at mains input: 3 x 400 V 1 x 230 V* Cont. power (TIG/MMA): 8.3 / 9.7 kVA 3.2 / 3.7 kVA Cont. current (TIG/MMA): 12 / 14 A 14 / 16 A Max. current (TIG/MMA): 16 / 21 A 26 / 26 A cos phi: 0.95 0.95 MMA/stick electrode operation: Stick electrode: 1.5 - 6.0 mm 1.5 - 3.25 mm (Cel-suitable) Open circuit voltage: 90 V 103 V Welding voltage: 20.8 - 31.2 V Welding current: 20 - 280 A Duty cycle 35%: 20.8 - 26.4 V 20 - 160 A 280 A (40 °C) 150 A (20 °C) Duty cycle 50%: 250 A (40 °C) Duty cycle 60%: 240 A (40 °C) Duty cycle 100%: 90 A (40 °C) 210 A (40 °C) 80 A (40 °C) Protection class: Insulation class: Cooling: Main switch: Operation modes: Settings: LEDs: Display: Electrode type: Remote control: VRD: Power source: Norm: Socket 50 mm²: Socket 50 mm²: IP 23 H AF 3-phase MMA/stick welding, TIG (DC) welding with LiftTIG ignition Welding current, hot start current, hot start time, TIG down slope time, electrode type Mains ON, welding ON, Failure, temperature protection LED indication for current, time, voltage Selectable: rutile, basic, cellulose Power socket, 10-pole Optional Inverter EN 60974-1 "S" / CE Earth lead cable Electrode welding cable Mains supply cable: 4 x 2.5 mm², 5 m long with 400 V, 16 A plug Weight: 17 kg Dimensions l x w x h: 495 x 210 x 450 mm *: BiPowerPLUS: Multi-voltage supply system: Automatic switching between 1 and 3 phases in the range 220 – 400 V (option) Data at mains input: 3 x 400 V, 1 x 230 V* TIG operation: Open circuit voltage: 90 V, 103 V Welding voltage: Welding current: Duty cycle 35%: Kjdpey U Eaxofx Anwjdn Duty cycle 50%: Duty cycle 60%: Duty cycle 100%: 10 - 21.2 V, 10 - 16.4 V 3 - 280 A, 3 - 160 A 280 A (40 °C), 150 A (20 °C) 250 A (40 °C) 240 A (40 °C), 90 A (40 °C) 210 A (40 °C), 80 A (40 °C)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,210 mm, total width: 430 mm, total length: 1,200 mm, overall weight: 133 kg, type of cooling: water, electrical fuse: 32 A, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 360 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: documentation/manual, Are you looking for a high-end MIG/MAG pulsed system for demanding industrial applications? The Merkle HighPULSE touch 400 DW combines state-of-the-art inverter and pulse-arc technology with intuitive touch operation, high power reserves, and a water-cooled system – ideal for steel, stainless steel, and aluminum in series and quality production. ✓ Pulse-Arc technology up to 400 A Controlled droplet transfer, less spatter, and reproducible seams – even with demanding materials. ✓ Intuitive touch operation: Fast parameter setting, saved jobs, and clear process guidance for efficient workflows. ✓ DW design with water cooling. Kdodpfx Aoy U D E Tjnwen High duty cycle and process stability under continuous load – ideal for industrial welding tasks. Areas of application: ✓ Series production in mechanical and plant engineering ✓ Aluminum, stainless steel, and steel structures ✓ Automated and manual welding workstations Scope of delivery: HighPULSE touch 400 DW power source, integrated double wire feeder, water cooling unit, water-cooled MIG/MAG torch, ground cable with clamp, 3×400 V power cable, operating instructions, etc. Special accessories: DeepArc ColdMIG HighUP Interpulse Automated Connector, 6-pin

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Kodpfjy Uxwqsx Anwedn Weight 23.2 kg Features VDR Lift-Arc Hot-Start Arc-Force

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Sale from warehouse location Albert-Proeller-Straße 9a, 86675 Buchdorf MIG/MAG pulse welding machine, decompact, modular Wire feeder, EZA, Drive 4X Steel puls S Rotating console (360°) for wire feeders, Cooling module for modular welding machines, Kedpfx Asy Uvrljnwodn Transport trolley (4 wheels) for transporting a power source, a cooling module or a toolbox, and a gas cylinder, assembled Intermediate hose package, water-cooled, 7-pole, 1 m Power plug, assembled

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 15 A, welding current (max.): 565 A, For sale: Miller PipeWorx 400 565 AMP (60% 500A, 100% 400A) 380 Volt Kdodpfoy Uvi Dex Anwsn 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece Kdsdpfxsy Ulzie Anwon -Dimensions: 1200/700/H1730 mm -Weight: 210 kg