Sebastian Justus Bewertung - Verwertung - Handel

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm Lodoxukpcjpfx Ah Ajai stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Condition: used, Year of construction: 1980, throat 350 mm stroke ca. 400 mm ram diameter 95 mm Lajdjxgu Itopfx Ah Aji press capacity 25 t table depth 450 mm table width 1.500 mm table height 900 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 2,0 x 2,3 m Straightening Press - Single Column MÜLLER - CR 25.2.1 - Power-On Hours: 543h - incl. working lamp

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Lasdjxfzdljpfx Ah Aji Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: good (used), functionality: fully functional, total height: 2,500 mm, installation height: 400 mm, total width: 1,100 mm, total length: 1,100 mm, pressing force: 20 t, table width: 750 mm, table length: 700 mm, overall weight: 2,000 kg, distance between stands: 700 mm, working height: 400 mm, clearance between the columns: 700 mm, stroke length: 410 mm, input voltage: 380 V, passage width: 700 mm, Max. Force: 20 Ton Stroke of ram: 490 mm Distance between stands: 700 mm Table LxW: 700 x 750 mm Ram LxW: 650 x 200 mm Featured with: - Machine can be used horizontal as vertical. - Tilting is hydraulic. Country of origin: The Netherlands Lodjwzcfljpfx Ah Asai Machine LxWxH: 110 x 110 x 250 cm Machine weight: 2.000 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Lajdowd Nybopfx Ah Asi Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: used, Table size: 630 x 490 mm Stroke length: 500 mm Lsdpfsv S Uyqjx Ah Aoai Max. thrust: 500 mm

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm Lsdsvzxq Sjpfx Ah Ajai hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter +++++ Ljdpovxlr Defx Ah Aoai Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation Laedpfjvut N Nex Ah Aei

Condition: excellent (used), Year of construction: 2010, operating hours: 9,800 h, functionality: fully functional, Description EDEL - STANZTECH PROFILTEC - 2030 WITH LOW HOURS - 9800 HOURS MACHINE RUN PER DAY 2 TO 3 HOURS ONLY MACHINE IS ECELLENT CONDITION LENGTH OF WORKING 3000mm tubes TECHNICAL DETAILS Riexinger control system: V1.0 Punching force: 260kN Drive system: hydraulic Stroke sequences: max. 50 1/min Feed length: 3,000 mm Max. Lifting height: A-axis 60 mm Max. Positioning speed: X-direction programmable up to max. 64 Smallest programmable linear axis travel: 0.1 mm MACHINE DETAILS Hydraulic operating pressure: 190 bar Nominal power of the pump motor: 15kW Pump capacity: 2 x 48 l/min Tank capacity of hydraulic unit: 200 l Connected load: kVA 22 Operating pressure: min. 6 bar EQUIPMENT - Standard accessories - Hydraulic unit Lsdpovk R Rpsfx Ah Ajai - Switch cabinet - Roller conveyor - Documentation MACHINE WEIGHT 2000 KG

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-INZETABLE workshop / brooder press Available in both 20 and 25 tons. BAR-MAN 20: 3300 euro Lodpfot A Dznex Ah Aeai BAR-MAN 25: 3860 euro The BAR-MAN can be used for a wide variety of purposes. Think of maintenance work, cutting keyways, pressing in and out of bearings and much more. With this powerhouse you can do anything, while still working in comfort.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Lsdpjtzxvwjfx Ah Ajai Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, stroke length: 500 mm, power: 8.75 kW (11.90 HP), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Lodpotzwxdefx Ah Aeai Operating pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clear opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Machine is in very good technical condition. Fully overhauled. Inspection and test run under power possible on site.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Lajdpstv Ewdsfx Ah Aji Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards --- Are you looking for a customized machine? Contact us for a customized offer.

Condition: used, Year of construction: 1976, pressure 20 t Lasdpfxjtqqwuo Ah Aji throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Ljdpfx Ahjhrakvo Ajai Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Year of construction: 1986, condition: like new (used), Used PJ Hare ltd C frame hydraulic press for sale: Pj Hare Limited hydraulic press for sale PRESS MODEL: 25HP Overall Height MM: 2425 Overall Width MM: 1120 Overall Depth MM: 1470 Weight KG: 2000 Fixing Hole dio. MM: 18 Fixing Hole Centres MM x MM: 610 x 1108 Fixing Pad Size: MM x MM: 120 x 250 Oil Capacity L: 50 Air Supply Pressure Max bar: 6 Air Supply Pressure Min bar: 4 Main Motor Power kw: 7.5 Motor Fuse Rating A: 20 Complete with cushion Electrical Supply Details: Minimum Fuse Rating A: 35 Minimum Conductor Size mm: 2.5 PAGE 2: Model 25HP: Capacity Tons: 25 Capacity KN: 250 Ram Force Tons: 3.1 Ram Advance Speed: 425 Ram Pressing Speed: 35.1 Ram return Speed;289 Motor Racing KW:7.5 Weight KG Approx: 2000 Max Stroke: 150 Guard Aperture Width: 680 Guard Aperture Height: 300 Min. Shut Height: 200 Max. Daylight: 450 Shut Height Adjustment: 100 Throat Depth: 250 Bed Height: 900 Bed Width: 650 Bed Depth: 480 Front to Centre Line: 250 Clearance hole dia: 150 Clearance under bed: 350/ 250 Tee Slot Details: 18,15,34,33 Bed Thickness: 95 Side Chute Width: – Vert Chute Width: 255 Hole in Throat Width: 250 Hole in Throat Height: 250 Top Platen Width: 420 Laodpohcfyusfx Ah Aji Top Platen Depth: 220 Top Platen Fixing Hole Details: 370, 170, 13 Tool Holder dia: 40 Tool Holder Length: 65 Fixing Hole dia: 18 Overall Depth: 1400 Overall Width: 900 Overall Height: 2450 Fixing Hole Centres: 1110 Hare presses for sale New c and h frame hydraulic presses for sale

Condition: new, Year of construction: 2019, machine/vehicle number: DF0287, pressure:25 t passage width:1000 mm stroke:800 mm Weight of machine approx.:4 t dimensions:ca. 2054 x 2200 x 3126 mm return capacity:2 t Ledpfefxyiksx Ah Ajai :5 kW Max Working height:800 mm :80 mm/sec :10 mm/sec. :80 mm/sec :800 mm pestle plate:400 x 400 mm table plate:1000 x 800 mm table height over floor:850 mm Table cut-out:650 x 150 mm :200 l pestle is stabilized by 4 per ø 50 mm chrome-plated linear guides:Bronzeführungen pestle strength:122 mm Steel plate on spring rolls:600 x 400 x 15 mm :S7 1200 Lightcurtains by Schmersal:1800 mm ab Boden Monitor:SIEMENS 10 Zoll Installation table on the left of the machine body with 10mm thick plage-milled steel plates:1000 x 800, 850 hoch mm

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Laodefcw Apopfx Ah Aei Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm