DREWEX PPHU Kazimierz Lipka

Condition: excellent (used), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: electric, total length: 7,200 mm, overall weight: 3,500 kg, Equipment: CE marking, OTT edge banding machine, model Twister Jointing / cutting, flush trimming, longitudinal milling, corner copying (AKF), scraper blades R2/R1mm, surface scrapers, cloth disc unit. Spare slot for grooving unit. All spray nozzles, separator, lubricants, cleaning agents. Beckhoff control, each frequency inverter individually driven! Setup within the machine gap. Narrow-part shuttle. Isdpfxoy D Sm Re Abbotf Demonstration available by arrangement. Machine available immediately. Sale in DACH region with warranty.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function Isdpfoy D A Swex Abbotf GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 008417, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Isdpfey D Af Djx Abbotf Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Edgebander Artech Akron 435 Pre-milling, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finish trimming saws, Multi-cutter R1-R2 – top and bottom milling and corner processing, Iedpfx Abey Dtw Dobetf pneumatic adjustment, Profile scraper, Flat scraper, Polishing unit, Max. workpiece height: 60 mm Max. edge thickness in roll: 3 mm, Feed speed: 12 m/min Condition: very good.

Condition: ready for operation (used), Year of construction: 1985, Edgebander manufactured in 1985. This HOMAG FG63 features a lifting table with pusher, roller conveyor, and feeding unit. It includes a double-end profiler, milling station on both sides, and a glue application unit for efficient profiling and folding of trim strips. If you are looking to get high-quality edging capabilities, consider the HOMAG FG63 edgebander we have for sale. Contact us for further details regarding this machine. • Condition: Used, not rebuilt – without warranty • Control system: Siemens Simatic Touch • Technical features: • Machine for profiling and folding trim strips • Milling station on both sides • Adhesive strip application / glue application unit • Folding unit for folding pre-folded workpieces • Sliding shoe for pressing Additional equipment • Lifting table with pusher • Roller conveyor Ijdpfxey Driro Abbstf • Feeding unit • Transfer system with workpiece pre-cleaning • Discharge table for material removal

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Itsdpfx Aoy Dq Iaobbef Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), machine/vehicle number: 0-261-05-2069, functionality: fully functional, operating hours: 340 h, total height: 1,730 mm, total length: 7,360 mm, total width: 1,270 mm, overall weight: 3,200 kg, Single-sided edge banding machine in right-hand configuration, well-equipped and suitable for processing solid wood edges as well as thick PVC edges. Technical highlights: • Edge thickness: 0.4 – 15 mm • Workpiece thickness: 8 – 60 mm • Feed speed: 11 – 20 m/min (continuously adjustable) • Including automatic edge feeding with 800 mm rotating table • Quickmelt glue unit with pre-melter, PU-capable interchangeable glue pot Equipment: • Jointing cutter unit (2 × 2.2 kW) • Pneumatic end trimming unit (adjustable 0–15°) • Pre-milling and flush trimming units • Profile trimming unit for postforming/softforming • Scraper unit + glue joint scraper • Cleaning spray system • Polishing units Control: Iedpey Dqxrsfx Abbstf • PC 16 controller with graphical user interface

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Edge thickness: 0.4 to 8 mm Panel thickness: 10 - 60 mm Grinding unit Gluing system End trimming unit Trimming unit Corner rounding unit Edge scraper unit Itedpfx Abey Dkidsbjf Glue scraper unit Brush unit Control: Touch screen Available within 1 or 2 weeks

Condition: reconditioned (used), Edging thickness: strip material up to 8 mm, roll material up to 3 mm Itedpey Diwmjfx Abbjf Jointing unit Glue application (cartridge system glue nozzle) Pressure unit Cut-off station Milling station Pull scraper Corner copying Surface scraper Total length approx. 5350 mm (including magazine table) Overhaul: Motorized infeed fence Heating system completely overhauled, new heating element with coating Heating system modification for automatic refilling Conversion to sensing nozzle Milling: conversion to motorized adjustment New knives Detailed equipment on request Data taken from a data sheet, therefore no guarantee

Condition: used, Year of construction: 1988, machine/vehicle number: 387/8-84, functionality: fully functional, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 51 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,280 mm, total length: 3,750 mm, total width: 850 mm, overall weight: 756 kg, Equipment: CE marking, documentation/manual, Mode of operation: hot/cold process, one-sided left Edge band thickness: 0.4 - 8 mm Maximum edge band height: 51 mm Workpiece dimensions: width min. 50 mm, length min. 180 mm, thickness min. 6 mm Feed speed approx. 11 m/min Glue application via blade nozzle Itedpfxsy Dh D Eo Abbef End trimming Flush trimming – tiltable up to 15 degrees Radius trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar

Condition: ready for operation (used), Year of construction: 2010, Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details. Iedpfsy Dgm Sex Abbstf • Used single-sided edge banding machine

Condition: good (used), Code: 0358 Brand: FRAVOL Model: VSB - CE Standard Edgebander for straight, round or curved panels with edge of veneer , melamine, PVC, Abs, up to 3 mm thickness - Ce Standard Technical data: Iodpfxoy Dggro Abbetf New patented working table on nylon plugs which guarantees an easier panel sliding and perfect integrity and cleanliness of the faced panel surface Worktop dimensions mm 910 x 860 Worktop height mm 910 Panel height mm 10/40 Edge thickness 0,4 - 3 mm Min. internal radius 20 mm Working pressure 6 bar Installed power Kw 2,35 Supporting bar with balls Compressed air 6 bar Overall dimensions: mm 900 x 900 x 1100 h Weight kg 240

Condition: ready for operation (used), Year of construction: 2000, overall weight: 2,000 kg, Edgebander manufactured in 2000. This OTT Pacific V6-F features an edge thickness capability of 0.2 - 6 mm and can handle workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and includes various processing units such as joining mills, a gluing unit, and a polishing unit. If you are looking to get high-quality edge banding capabilities, consider the OTT Pacific V6-F machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Edge thickness: 0.2–6 mm • Workpiece thickness: 8–42 mm • Workpiece width: min. 70 mm • Workpiece length: min. 150 mm • Feed speed: 12 m/min • Electrical connection: 3 x 400 V, 50 Hz • Exhaust connection: 2 x Ø 120 mm at 20 m/sec • Exhaust capacity: 30 m³/hProcessing units and features (part of the machine) • Joining mills: 2 x 1.5 kW, 12,000 rpm, 200 Hz; two application-controlled work spindles • Gluing unit: Rapid-heating tank with Melt-matic; automatic edge magazine with optical monitoring (for strip edges in fixed lengths) • Release agent spray system Isdpfey Df Uuox Abbetf • Crosscut unit: 2 x 0.2 kW, 12,000 rpm, 200 Hz; automatic swivel 0°/3° • Flush milling unit: 0°/15°/30°/45°; 2 x 0.43 kW, 12,000 rpm, 200 Hz • Radius milling unit: R2–R5; 2 x 0.3 kW, 12,000 rpm, 200 Hz • Corner rounding milling unit: 2 x 0.3 kW, 12,000 rpm, 200 Hz • Quick-change stations: 2 for milling units • Scrapers: 2 x carbide scrapers • Polishing unit: 2 x 0.2 kW, 2,800 rpm, 50 Hz Additional equipment • None included or specified beyond the machine’s built-in units and features.

Condition: used, Year of construction: 2004, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edgebander / edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Joint milling unit Gluing unit Quickmelt Combination milling unit for flush milling, chamfer milling, radius milling Trimming unit automatically adjustable from chamfer trimming to straight trimming via program Rounding unit (front side) Profile scraper unit / Rounding scraper unit Surface scraper unit Buffing unit for polishing edges Release agent spray system Special equipment: Hot-air system Schugoma HDL3020 (retrofitted) Hot-air process for processing laser edges (co-extruded edge) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Itsdpjy Df N Sofx Abbef Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edging thickness: 0.4 - 3 mm Edging height max.: 51 mm Edging strip length min.: 350 mm Edging overhang per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Total length: 3700 mm Width: 1440 mm Max. height: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Stock location: Supplier Ijdpoy Dd Iyofx Abbotf

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) Iedey Ddycopfx Abbjtf • Automatic edging feed: coil or strips

Condition: used, Lange B90 KFE Edge thickness: 0.4 – 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for pre-processing before the gluing section Automatic edge magazine for coil material Teflon-coated quick-change glue pot for hot-melt adhesive granules Workpiece height: 8 – 50 mm Fine-adjustable glue roller Guillotine shears up to 3 mm for pre-cutting coil material Pressure unit End trimming unit Multi-function milling unit for flush, radius and bevel milling Corner copying unit for workpiece edges up to 2 mm, switchable from the control panel Radius scraper Surface scraper Buffing unit Ijdpfx Ajy Ddnasbbetf Spraying unit at infeed and outfeed Year of manufacture: 2018 Machine is FUNCTIONAL and in GOOD CONDITION Available at location

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Ijdpfxsy Dc Ulj Abbetf Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation

Condition: like new (used), Hebrock F4 Edge Bander Well-equipped, available for inspection before purchase. Note: The machine can be viewed and tested from May 11th. Itsdpfoy Dcmuex Abbjf Pre-milling cutters, Glue application via roller, Equipped with glue drain, The glue pot is replaceable. Pneumatic pre-cut guillotine, Pressure rollers, Flush trim saw, Top and bottom milling unit, R1–R2, Profile scraper R1-R2, Interchangeable corner rounding unit for 1mm and 2mm, Flat scraper, Nesting capability, Pneumatic 3-point adjustment, LED lighting, Max edge tape thickness (in roll): 3mm, Feed speed: 7 and 10 m/min, Power requirement: 7.08 kW, Machine as new, ex-demo.

Condition: good (used), Year of construction: 2007, functionality: fully functional, EDGE BANDING MACHINE WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, Itedpfsy Dcipsx Abbof Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Rolls: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electrics: 400 V, 50 Hz, 3-ph Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Control panel at machine infeed Separating agent application Jointing cutter unit: 2 x 2.2 kW 1 x with feed direction and 1 x against feed direction

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function Iedpfx Aboy A I Sgebjtf GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 25 mm, total length: 8,600 mm, Equipment: CE marking, Ott Edge Banding Machine Type StrongEdge The machine was completely overhauled some time ago and is being sold due to business closure. The machine is in top condition and can be sold with a warranty. Workpiece thickness: 8-60mm Feed speed: 20m/min with corner copying Automatic continuous lubrication Beckhoff bus control system Itodpfjy Azcfsx Abbjf CombiMelt PUR bonding system for zero-joint appearance Jointing Edge magazine Gluing End trimming Flush milling Longitudinal milling Corner copying controlled by AKF Scraper blade R1 and R2mm Surface scraper blade Buffing unit (convertible to texture finish) Nesting package Pivoting grooving unit Sanding unit Angle feed-in aid

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm Itodpfxsy Ay Aks Abbsf

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts Isdpfx Ajy Av A Hjbbjtf - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: used, Year of construction: 2015, Edgebanding machine Itodpfx Aboy Ak R Sebjf Manufacturer: Felder Model: G460 Year of manufacture: 2015 Operating hours: approx. 280 h Glue pot is dirty. As a result, gluing is insufficient. Requires thorough cleaning. Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Feed rate: 9 m/min Overall length: approx. 3,200 mm Weight: approx. 560 kg Pre-milling unit: Yes End trimming saw: Yes Flush milling station: Yes Surface scraper: Yes