Reitz Technik GmbH

Condition: used, Manufacturer: Grenier - Charvet Model: E 15 Nodjzg Nf Tspfx Ac Tjcu Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L and 440 L vessels Mixing tool: Ø 960 mm butterfly Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Condition: used, Year of construction: 1989, Manufacturer: Pendraulik Model : WD R 24 Type: dissolver Year: 1989   Power : 17,5 KW ATEX class : (Ex) e G3 Mixing speed : 400 – 1500 rpm Speed variation : electric Dispersion disc: Ø 300 mm Recommended vessel: Ø 700 – 1000 mm   Mounting: wall or floor standing Sold with 1 bowl (additional units available on request). Vessel clamping: manual and mechanical Ncjdszg Nf Hopfx Ac Teu Total height: 3520 mm Distance between mixing head and floor: 250 mm – 1400 mm   Technical Data available

Condition: used, Used Winkworth approximately 30 litre capacity (product dependant) stainless steel z-blade mixer. (2) stainless steel z-blades driven by 3kw, 3/50, 1450 rpm motor. Weight: Estimated: Kg1000.0 Ncodjzfigbjpfx Ac Tju

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Nsdpfx Aezfh U Dsc Tjcu Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Ncsdpfezfh Uqsx Ac Tou Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Nedpfx Acszd Urgs Tjcu

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Ncodpfx Ajzcznysc Teu Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the mixing head: 240 mm Nsdpfszbyp Hex Ac Tecu Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1290 mm Maximum container width: 980 mm Dimensions:> floor to agitator (lower position): 0 mm Dimensions: floor to> top of mixing unit (raised position): 1255 mm Dimension : 1110 x 1300 x 3270 mm   Technical documentation available Video showing the machine in operation in our workshops

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Ncjdpjzbuhdjfx Ac Tju

Condition: used, Použitý vysokointenzivní/univerzální vakuový mixér Stephan Model UM 60 E. - Výrobce: Stephan, Německo, nyní skupina Proxes. - Model: UM60 E (elektricky poháněný screper). - Nádoba: Nádoba z nerezové oceli celkového objemu 60 litrů, pracovní 6-40 litrů. Ncsdpfozbug Hox Ac Tsu - Nůž/Pohon: Agitátor typu S-čepel poháněný pomocí dvourychlostního el. motoru 5.5/7.5 kW, 1500/3000 ot./min, 50 Hz, 400 V.

Condition: used, Używany poziomy mieszalnik wstęgowy wykonany ze stali kwasoodpornej produkcji WAM GROUP S.p.A. (Włochy) model WNHO2400E/0DK. Pojemność całkowita mieszalnika to 2400 litrów. Pojemność robocza około 1500 - 1700 litrów. Kwasoodporna komora mieszania ma wewnętrzne wymiary: średnica 1210 mm x długość 2000 mm i jest wyposażona we właz inspekcyjny zlokalizowany na ścianie bocznej o wymiarach: szerokość 1200 mm x wysokość 450 mm. Mieszalnik posiada mieszadło z przerywaną, podwójną wstęgom, przeciwnie ukierunkowaną które jest wykonany ze stali nierdzewnej magnetycznej (stal ferrytyczna). Mieszadło jest napędzane przez przekładnię zębatą oraz pasową silnikiem elektrycznym o mocy 18,5 kW, 1470 obr./min, 50 Hz. Robocze obroty wału około 29 obr/min. Urządzenie posiada dolny, centralny wysyp wyposażony w zawór klapowy, sterowany pneumatycznie. Wymiary wysypu: szerokość 220 mm x długość 250 mm. Górna pokrywa mieszalnika jest wykonana ze stali kwasoodpornej i jest wyposażona w centralne przyłącze o średnicy 390 mm. Nsdpfx Ajzbucnoc Tocu Specifications: Capacity: 2,400 L Material of construction: Stainless steel and magnetic non corrosive steel (ferritic steel) Width: 1,210 mm Horsepower: 18.5 kW Length: 2,000 mm Jacket: No Discharge Type: On bottom pneumatically operated valve Type Of Ribbon: Interrupted double counter-pitch ribbon screw Revolutions Per Minute: 29

Condition: new, Brand new PERRYmix model HVP 2000 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 2000 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 5.5 kW electric motor via NORD gearbox. - Swing arm driven by 1.5 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Nedjzbub Rjpfx Ac Tecu Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 1000 with stainless steel arm and tilting half-circle top cover)

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. Nodpfxszbubwe Ac Tscu - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)

Condition: new, Nieużywany pionowy zbiornik mieszający produkcji Langields o pojemności 7766 l. Wykonanie zbiornika ze stopu Nikiel 200 (BS3072N11). Wymiary zbiornika: średnica 1950 mm x długość prostej linii ściany 1950 mm. Dennice górna i dolna - elipsoidalne, spawane. Zbiornik jest przeznaczony do pracy na ciśnieniu do 18,35 bar i temperaturze do 200 C. Zbiornik jest wyposażony w montowane od góry mieszadło łopatowe, dwupoziomowe, z przykręcanymi łopatami. Napęd przez przekładnię z regulacją obrotów silnikiem el 3 kW. Mieszadło posiada dwa uszczelnienia mechaniczne wału i czujniki temperatury. Zbiornik jest zamontowany na czterech nogach ze stali węglowej. Njdpfx Aezbt U Nsc Tecu

Condition: used, Year of construction: 2015, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Nedpfx Acezak Ike Tocu Type: Pneumatic mixer / stirrer Diameter of the agitator: 320 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1680 mm Maximum width of a container: 950 mm Floor>-to-agitator height (lower position): 65 mm Floor-to->top height of the agitator (top position): 1740 mm Dimensions: 111 x 130 x 327 cm   Technical documentation available Video showing the machine in operation in our workshops

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: type plate available, Ystral C 22.000 S Conti-TDS-3 inline disperser, designed for ATEX category Ex II 2D/-c T135°C X (indoor/outdoor), stainless steel control panel, 22 kW, nominal speed 3000 rpm, adjustable speed 600 - 3600 rpm, fitted with a freewheel clutch to interrupt the drive in the event of overload (prevents damage to the machine if foreign objects enter), liquid inlet and outlet DN 65 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, drainage outlet DN 25 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, 2 powder inlets; powder inlet 1 DN 40 milk coupling (DIN 11851) fitted with a butterfly valve and Camlock connection, powder inlet 2 DN 32 clamp connection fitted with a butterfly valve and Camlock connection, powder inlet 2 in a special version for the installation of replaceable Teflon inserts for the processing of highly sticky powders, product contact parts made of AISI 316L stainless steel (1.4404), double mechanical seal with WE100 flow monitoring system, cooling and lubrication of the mechanical seals using clean, filtered tap water, assembled on a mobile stainless steel machine frame, stainless steel cover over the motor, used for the dust-free feeding, wetting and direct dispersion of powders (pigments) in liquids Nsdpfsy Uvllsx Ac Tscu

Condition: used, STAINLESS STEEL MIXER TANK, STAINLESS STEEL MIXER, ACID-RESISTANT, CHEMICAL INDUSTRY -Design: Flat-bottomed, cylindrical shell, openable lid mixer tank. Heating jacket on the bottom and shell, with the lid opened by a pneumatic cylinder. -Material quality: stainless steel Ncjdpfxey Udcxj Ac Teu -Overall dimensions: 1500x960x1750mm -Internal tank size: diameter 800x800mm -Electrical data: 380V; 1.1kW; 2.5A -Mixer speed: ~100 rpm

Condition: used, Mało używane mieszadło ujednolicające wykonane ze stali kwasoodpornej produkcji Silverson (Anglia) model GX10/1500. Mieszadło posiada głowicę do ogólnych zastosowań. Napęd bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, 1470 obr/min. W zestawie znajduje się przejezdna podstawa z hydraulicznym unoszeniem/opuszczaniem typ D/Lift produkcji Silverson. Ncodpfx Aoy Inr Rec Tju

Condition: used, Używany mieszalnik lemieszowy Morton-Lodige ze stali kwasoodpornej. Wymiary komory wskazują, że to model FKM1200D. Pojemność komory mieszania 1200 l. Wymiary: długość 1750 mm x średnica 1000 mm. Mieszalnik posiada pojedyńczy wał z mieszadłami lemieszowymi i dwoma mieszadłami pół-lemieszowymi. Wykonanie ze stali ko. Napęd przez silnik elektryczny z reduktorem. Dolne otwory wysypowe, wyposażone w klapy sterowane pneumatycznie. Mieszalnik posiada miejsce na zamontowanie dwóch mieszadeł intensywnych (chopperów). Maszyna zamontowana na ramie ze stali węglowej. Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Njdpoy Inr Djfx Ac Tjcu Jacket (Y/N): N

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Emulsifying motor: 3000 rpm – 3 kW Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining 2 variable-speed agitators on the lid - 2 three-bladed propellers: 0 to 200 rpm - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet Ncodoy E T Swopfx Ac Tju A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Nodpfx Acsy Ddv Dj Tocu

Condition: used, Year of construction: 1989, Manufacturer : Rayneri / VMI Model : Ultramix ME 120 RB Type: Stirrer - Mixer on stand Year: 1989 Agitation : rotor stator Motor power: 1.5 kW – 1,500 rpm Speed variation: mechanical Adjustment of the height of the mixing head from the floor: 0–85 cm Length of stirring shaft: 90 cm Up and down: manual with counterweight Ncedpfjyzt Uqox Ac Tju Leg clearance: max. 70 cm Machine dimensions: W 100 x D 130 x H 230 cm

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Njdpfx Aoyzp Hvsc Tscu Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Njdpfx Aceyx Sxcs Tjcu Spiral agitator: 29/58 rpm

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar. Ncjdpfx Acjyx Ibgs Tou