K & K Werkzeugmaschinen

Condition: excellent (used), functionality: fully functional, Power supply: Three-phase 380 V Lsdoxy Ngqjpfx Agmsrw Motor: Main motor power 3.0 kW Dimensions: 2200 x 1500 x 2100 mm (L x W x H) Weight: 500 kg Working capacity: Table movement 0°–90° (manual) Milling speed: Variable, up to 3000 rpm Working area: 900 x 600 mm (length x width)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, spindle speed (max.): 21,000 rpm, TECHNICAL DETAILS Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Lrodpfxjxy Hcio Agmsw Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: excellent (used), Year of construction: 2022, This AXEL 4 machine is designed for 4 axis machining and sawing of aluminum and metal profiles. This particular machine was installed in 2022 and has only very few working hours. It is being sold due to the cancellation of the aluminium production project. It is still in excellent condition and immediately available. Viewing possible upon appointment. This machine is equipped with: 2 additional clamps 2 workspaces 75 cm conveyor belt FST Solid 4-axis Label printer DXF Import License FOM Data Import Licens Wireless barcode reader Clock program Toolkit C1 HSK63 X-axis top face only 7675 mm X axis top face + ends 7535 mm Y and Z axes for machining on top face 580 x 360 mm Y and Z axis for machining on 3 faces of profile 520 x 360 mm A axis -15°; +195° Tool speed 0 – 24000 rpm Tool Ø max 80 Tool collet HSK E63 Tool magazine capacity 15 positions Max. weight 4900 kg Full technical specifications in the attached document. Lrodpfjxywm Esx Agmjw Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), - Pneumatic workpiece clamping devices Lodpfx Agjxylxvjmerw - Pneumatic tool clamping device - Protective cover - 400V

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Lrjdpfx Ajxx Un Regmew Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Year of construction: 2009, condition: not inspected (used), functionality: limited functionality, Plastic window frame production machine, still complete. C&C corner cleaning machine. 2-head welding machine. 2-head sawing machine. Glazing bead saw with remote control. Drilling and milling machine. Drainage milling machine. Copy router machine. Steel saw machine. All machines are operational and can still be serviced by Kaban if required. We will also facilitate contact if needed. Ljdsxxnnkjpfx Agmorw

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 20114, Automatic tool changer Lrodpfxsxxll Hj Agmsw The spindle is defective

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Lodpfx Asxxiuxsgmorw Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Year of construction: 2007, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 9,000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Ljdpfxoxwydbj Agmsrw Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Loading is included in the price Weight: approx. 8,500 kg

Condition: new, Year of construction: 2025, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary axis table) for automatic 3-sided machining of profiles made of aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new Ljdpfx Agoxwt Iyemerw CNC control based on Windows® with 3D color graphics and simultaneous machining. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speeds: 120 to 24,000 rpm Space requirement including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear working area protection by safety fence with access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control based on Windows® with 3D color graphics and simultaneous machining

Condition: like new (used), Year of construction: 2022, operating hours: 162 h, functionality: fully functional, machine/vehicle number: C127242, travel distance X-axis: 4,300 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 330 mm, controller manufacturer: CamPlus 7.2, spindle speed (max.): 20,000 rpm, operating hours of spindle: 63 h, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, Equipment: rotational speed infinitely variable, CNC machining center with 3 CNC-controlled axes for processing profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. The machine features a tool changer with 8 positions, accommodating 2 angle heads and a disc cutter for 5-sided machining of the workpiece. Machine operating hours: 162 h Spindle operating hours: 63 h Ledpfx Aexv Ayiegmjrw Axis travel X-axis (longitudinal) (mm): 4300 Y-axis (transversal) (mm): 270 Z-axis (vertical) (mm): 300 Milling spindle Max. power S1 (kW): 5.5 Max. speed (rpm): 20,000 Tool holder: HSK 63F Automatic tool magazine Max. number of tools in the magazine: 8 Max. number of angle heads in the magazine: 2 Max. disc diameter in magazine (mm): Ø 180 Machinable profile sides With tool without angle head (profile top side): 1 With angle head unit (top, sides, and end faces): 2 + 2 With saw blade (profile and end faces): 2 + 2 Thread tapping available (with tapping tool in aluminum and with through-hole) With compensator M8 Workpiece clamping 4 pneumatic clamping units Automatic positioning of clamping units via X-axis Profile positioning Left reference stop with pneumatic movement Right reference stop with pneumatic movement Functions: - Overlength processing, up to twice the nominal length on X (two reference stops) - Multi-workpiece operation - Multi-step base processing – up to 5 steps - Multi-part processing on Y - Automatic multi-step machining control Software: Windows, Drill T, CamPlus 7.2 Additional equipment: MG hand remote control with LCD graphic display (useful in pendulum mode) Barcode reader Tools: Emmegi ER20 angle head Disc cutter, drill

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Lsdpfoxvp Nkox Agmsrw Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price

Year of construction: 2010, condition: excellent (used), The QUADRA L1 consists of an automatic loading magazine and a gripper feed system for profile lengths up to 7,500 mm. The feed unit transports the profile bar to the machining unit, which is equipped with 6 spindle motors for drilling and milling operations all around the profile. The sawing module is 3-axis and fitted with a 600 mm diameter saw blade. The finished machined part is transported from the machining area to the unloading table by a discharge unit, where it is conveyed to the retrieval position via powered belts. The machining area is fully enclosed and can optionally be fitted with sound-absorbing mats. Automatic loading magazine with a maximum capacity of 15 profiles at a width of 100 mm. The profiles are transported to the gripper position via belt conveyor. Automatic 3-axis CNC feed unit. Based on profile data, the unit positions itself according to length and profile cross section at the loading position to feed the bar for processing. The gripper clamps the profile bar at a predefined position specified in the technical drawing. Lredpfx Agoxvbynsmsw A 600 mm saw blade allows a wide cutting range thanks to its 3-axis travel capability. Our price is net plus the applicable VAT. Transport is not included, but loading onto the customer’s truck can be arranged upon request.

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Lsdpfxoxvaw Se Agmjrw

Condition: new, Year of construction: 2025, functionality: fully functional, Company Tekstura d.o.o. sales new FOM Industry machines only in Slovenia. Ljdpfx Agexu Uyljmerw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, X working area: 3,100 mm Electrospindle: 1 HSD, ISO 30 taper – max. 18,000 rpm Tool changer positions: 5+1 Worktable: 4 automatically positioned clamps Weight: 1,950 kg Lrjdpfjxt Hd Hsx Agmew Dimensions: 5,472 x 1,900 x 2,200 mm

Condition: new, Year of construction: 2025, The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre. Lsdpfx Aoxt D Szsgmerw The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials. Machining area X: 7,100 mm Machining area Y: 460 mm (4 axes) Machining area Z: 300 mm Machining axis A: 180° Machining axis C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum speed A: 3,600°/min Maximum speed C: 1,800°/min

Condition: new, Year of construction: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes and precisely tailored to the needs of various industries. It is a unique, reliable, and cost-effective product that optimizes working conditions for operators. Lodpfsxt D R Dox Agmsrw The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a speed of 20,000 rpm, it easily handles all production requirements. The machine features comprehensive equipment: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining operations can be carried out within a footprint of just 10 m². The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis rotation: 180° X-axis max. speed: 55 m/min Y-axis max. speed: 40 m/min Z-axis max. speed: 30 m/min A-axis max. speed: 3,000°/min

Condition: good (used), – 2 pneumatic clamps Ljdpfxsxtvi Ee Agmjrw – 380V

Year of construction: 2002, condition: used, Copy milling machine for aluminum machining Vertical milling head: Longitudinal stroke: 2150 mm Lsdpfxoxta R Tj Agmerw Transverse stroke: 230 mm Vertical stroke: 210 mm Horizontal milling head: Longitudinal stroke: 265 mm Transverse stroke: 280 mm Vertical stroke: 105 mm Spindle speed: 12,000 rpm Pneumatic workpiece clamping Minimum quantity spray device Pneumatic copy bolts on both units

Condition: new, Year of construction: 2025, Single-spindle copy milling machine KF 227 Versatile use for plastic, aluminium, and steel profiles Lrjdpfx Agsxta Rtsmew

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Lrodjxr N Rmspfx Agmsw Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,700 Y AXIS (transversal) (mm) 270 A AXIS (electrospindle rotation) 0° ÷ 180° Z AXIS (vertical) (mm) 420 electrospindle kW 7 pendular Lrjdpfx Agexq Szxjmow

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Ljdpfx Asxnz Ivjgmorw Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Condition: good (used), – 2 pneumatic clamps – 380V Lredpfxexndcps Agmow