Kühn Metallverarbeitung

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Ndedpfx Ahoxzk Ifs Djd turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours

Condition: used, Year of construction: 2012, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Ndjdpfx Ahoxzk H Uo Djd number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NLX 2500 SY / 700

Condition: used, Year of construction: 2010, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model A CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Coolant Filtration System, Spindle Chiller, Machine Weight 31,000kg. S/No. HM12500058 (2010) - CE Mark Ndodpfx Ahsxzgcxs Ded Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Nsdexzga Dopfx Ah Dsdd

Condition: good (used), Year of construction: 2021, MAZAK Integrex i-250H ST SmoothAi, year of manufacture 2021, HALTER loading portal with robot, bar feeder BREUNING-IRCO ILS-MUK, main spindle 8" sub spindle 8", machining diameter 670 mm Bar diameter 65 mm Spindle speed: Turning: 5,000 rpm Milling: 12,000 rpm Ndedpfxexy T Dto Ah Ded Chain magazine: 38 positions, Turret: 12 positions

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, Control Unit Brand OKUMA Model OSP-P300SA Main Drive Spindle speed range 38-3800 Tool taper HSK 63 Number of axis 4 Movement Y-Axis Movement 160 mm B-Axis Movement 0.001° Tools Slots in storage 40 Nedjxy Tiiepfx Ah Djdd Media Chip conveyor Yes Additional Equipment HI-Cut Pro high-speed control This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1998, turning diameter over cross slide: 600 mm, For sale: CNC Lathe GILDEMEISTER CTX600E V3 with live tooling. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Nsdpfx Ahjxy Tfde Dedd Model: CTX600E V3 Control system: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 Machine specifications: - Turret: 12 stations for VDI-50 tool holders (6 driven stations) - Max spindle speed: 3,600 rpm - C-axis - Live tooling - Hydraulic tailstock - Tool measurement probe - Max turning diameter X-axis = 600 mm - Max turning length Z-axis = 1,000 mm - Coolant system - 400 mm three-jaw hydraulic chuck - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading onto truck included in the price The machine has undergone a full inspection. 100% operational. Connected and ready for work. Stal-Com has been engaged in the sale, service, and training on CNC machines from the DMG group for 19 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from across Europe and parts of Asia. Each machine can be inspected under production conditions, as we also perform subcontract machining. After purchase, we provide operator training and can assist with setting up part production at the customer’s site. We maintain long-term partnerships with many companies, supplying additional machine tools as needed.

Condition: like new (used), Year of construction: 2020, MAZAK Integrex i-200S 1500U Max. turning diameter: 658 mm Max. turning length: 1,519 mm Max. milling speed: 20,000 rpm Max. main spindle speed: 5,000 rpm Max. sub-spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-08 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck BB-08 for main spindle, diameter 210 mm - B axis 0.0001° (swivel head) - Y axis - Tool magazine for 72 tools (HSK) - Prepared for workpiece measuring system RMP-60 Ndodpfx Ahjxy Rb Aj Djd - Sub-spindle with C axis 0.0001 degree incl. C1+C2 synchronization - KNOLL filter system including chip conveyor, high-pressure cooling 70 bar, 7 pressure stages, dual switching filter - Mazak API interface

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control system: Mazatrol 640 MT Pro Travel distances: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speed of the axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm COUNTER SPINDLE Drive power: 26 kW Max. torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/chip removal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure levels PLC - Dual change filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Synchronous counter-rotation of turning and milling spindle Njdpjxy Nzujfx Ah Dsdd - C-axis 0.0001 degree (counter spindle) - Overload monitoring system for the spindle and axis feed system - Automatic ON/OFF with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1,500 U) - Hand type D3 (clamp jaws types A, B, C, D, E) - Maximum workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at the chuck CONTROL OPTIONS - Cylindrical interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous tapping, MAZACC2D, - EIA/ISO, tool length compensation - Fully programmable B-axis 0.0001° - Software for 5-axis simultaneous mode - For main and sub spindle 3-jaw quick-change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Condition: used, Year of construction: 2007, CNC Turning-Milling Center CTX 410 - Year 2007 Heidenhain Plus IT control - 3-jaw chuck - Driven tool stations Nsdpfx Ahjxy Nqcs Dodd - Tailstock - Chip conveyor - Coolant tank

Condition: excellent (used), Year of construction: 2014, operating hours: 3,000 h, functionality: fully functional, Year of manufacture: 2014, commissioning: 2017 OSP P300S control system Ndjdpfx Ahexy I T Ae Djd Travel ranges: X1/X2-axis: 695/235 mm Y-axis: 300 mm Z1/Z2-axis: 1,600/1,461 mm B-axis: -30° to +210° Maximum turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, max. torque: 955 Nm, bore diameter: 112 mm SMW VNK320-127 hollow clamping cylinder, through bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 stations, HSK-A63 Lower turret with 12 tool stations Self-centering steady rest on lower turret Hydraulic steady rest SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP probe Drum chip conveyor TMF300 with 980 L tank 8 bar circulation pump 70 bar high-pressure pump Hinged belt chip conveyor Tool monitoring system for tool life and breakage Tool measuring device (with standard chuck) for safe setup MacMan machine management with integrated PDA (production data acquisition) Part program storage: 2 GB Max. length of individual part program: 2 MB 2x USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Harmonic speed oscillation via periodic speed variation Tool height offset in Y-axis for turning tools Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C Hi-Cut Pro high-speed control for rotating tools 10 workpiece zero points (coordinate system selection function) Coordinate transformation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Smooth X control Max. turning diameter: 820 mm Max. turning length: 3,000 mm X/Y/Z/tailstock travel: 870/500/3,122/2,990 mm B-axis: -30° to +210° (0.0001° increment) Main spindle Drive power: 30 kW Max. spindle speed: 3,300 rpm Max. torque: 3,100 Nm Spindle nose: A2-11 Spindle bore: 104 mm Milling spindle Drive power: 37 kW Max. milling spindle speed: 10,000 rpm Tool magazine with 40 tool stations, Capto C8 Programmable NC tailstock MK5 Hydraulic steady rest, SMW Autoblok type RX5 Automatic opening/closing of clamping jaws High/low clamping force regulation (via M-code) 3-jaw chuck Schunk 500 mm Air cooling through the rotating milling spindle Through-spindle coolant, 70 bar Mayfran Concep 2000II coolant system 70 bar high-pressure pump Hinged belt chip conveyor Renishaw RMP 600 Torque support for angle head Preparation for flash-tool (multiple tool holder) Synchronized thread cutting Constant traverse angle during rapid feed Ndjdpfsxy Iw Ijx Ah Ded Thread chasing function Turn-milling under Mazatrol 5-axis machining package for Smooth X - EIA/ISO 5-axis simultaneous machining - Tool tip control 5-axis simultaneous - Spline fine interpolation - 5-axis spline interpolation

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, Njdpfx Ahsxy Hyzs Dodd year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, high-pressure cooling 12 bar, tailstock, chip conveyor, prepared for bar feeder,

Condition: used, Year of construction: 2017, Mazimum diameter of swing over bed: 920mm Mazimum diameter of swing over slide: 745mm Distance between spindle: 898mm X-axis: 315mm Z-axis: 800mm Nodpfexy Hahsx Ah Dsdd Y-axis: +80/-60mm B-axis: 803mm Maximum speed (rpm): 3500 Bar diameter: 77mm includes all tool holder and driven tools (one gear hobbing tool) interface for bar feeder. - no bar feeder included. Soon in our stock.

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Nodpfx Asxyy Ixoh Dodd Tool Changer: 40 ATC stations Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: good (used), Year of construction: 2004, Traub TNA 400 Y, year of manufacture 2004, TX 8 H control, X/Z travel 285/750 mm, Y-axis travel +/-50 mm, C-axis 0.001°, V-axis – programmable tailstock, spindle speed up to 3,150 rpm, 12-position turret, driven tools, VDI 40 mounting, 4,360 spindle hours, machine from prototype production, ATC measuring optics, lots of accessories. Nodpfoxyyn Esx Ah Djdd

Condition: good (used), Year of construction: 2004, functionality: fully functional, The machine is in good technical condition, after previous agreement the possibility of testing. Ndsdpfx Aexyv Tkjh Ded

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All details without guarantee. Ndodpfx Ahoxyv Alo Ded

Condition: used, Year of construction: 2000, Lathe Mori Seiki SL 200 MC, year of manufacture 2000 Ndjdpfexyvkvsx Ah Djd

Condition: good (used), Year of construction: 2000, Brand: BIGLIA, 2-axis lathe Model: B1000. Control: FANUC 18-iT. Chuck diameter: 315 mm Turning diameter: 400 mm. Turning length: 1000 mm. Spindle nose: ASA 8 Spindle bore: 85 mm Ndedpfjxyqi Hex Ah Djd Speed range: 30-3200 rpm Spindle motor: 26 kW S. Number of turret stations: 12 Tailstock quill diameter: 50 mm. Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Njdpfsxyl Tgox Ah Dsdd Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2004, weight max. 1,5 t Nsdpfoxylq Sjx Ah Djdd weight of the machine ca. 400 kg Accessories for a 4th axis machining center used on a HEDELIUS machine

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 31201, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Selling a fully functional Nakamura Superturn 3 at short notice due to lack of space. Feel free to contact us with any questions. Ndjdpfxoxyk Rws Ah Dsd

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Chip conveyor, Bar feeder interface, Tooling, EIA ISO, Rigid tapping Nodpfoxykpaox Ah Dedd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Ndedpfjxyidpjx Ah Dod Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system