Birka Composites

Condition: new, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Rotating forklift Manitou MRT 3570 vision ES Drive Diesel Year built 2026 Lifting height (mm) 34,700 Hedpfx Acsz A Idwo Aofl Lifting weight (kg) 7,000

Condition: used, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 17,550 mm, total length: 7,400 mm, · Kippwinkel 10 ° · Schüttwinkel 107 ° · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Crab Modus · Stützentyp: Flügeltyp · Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig · Hersteller: Deutz · Motornorm: Stage V / Stufe 4 · Motor Modell: TCD 3.6 L4 · Nennleistung Verbrennungsmotor / Leistung (kW): 55.92 kW / 55.40 kW · Max. Drehmoment / Engine rotation (min): 405 Nm @ 1300 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 4 - 3620 cm³ · Kühlsystem des Motors: Wasserkühlung Hedpfx Acez A Iddj Asfl · Anzahl Batterien / Batterie / Batteriekapazität: 2 x 12 V / 120 Ah · Battery starting current: (EN)850 A · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 2 · Max. travel speed: 25 km/h · Zugkraft: 9400 daN · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 44.50 % / 44.50 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge: 116 l/min · Hydraulikdruck: 275 bar · Motoröl: 11 l · Hydrauliköl: 144 l · Fassungsvermögen des Kraftstofftanks: 130 l · Lärm und Vibrationen: Geräuschpegel im Fahrerstand (LpA): 68 dB · Außenschallpegel (LwA): 106 dB · Vibrationswert an Händen/Armen: < 2.50 m/s² · Diverse Lenkräder (vorne / hinten): 2 / 2 · Steuerungen: 2 Joysticks · Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) standard

Condition: new, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Rotating forklift Manitou MRT 3570 vision ES Drive Diesel Year built 2026 Lifting height (mm) 34,700 Hjdpfx Acez A Ic Ts Asfl Lifting weight (kg) 7,000

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,178 h, empty load weight: 16,095 kg, Manufacturer: Manitou Hodpfx Aez Aqyqoc Ajfl Type: MRT 2150 Privilege Year: 2010 Capacity (t): 4,999 kg Hours: 5,070 h Mileage: 3,178 km Lift height: 20.60 m Weight: 16,095 kg Ground clearance: 0.37 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,360 h, load capacity: 3,000 kg, lifting height: 9,640 mm, fuel type: diesel, mast type: telescopic, construction height: 2,480 mm, motor manufacturer: Deutz, fork length: 120,501,200 mm, tire condition: 40 %, front tire type: pneumatic tires (air-filled), front tire size: 400/80-24, rear tire type: pneumatic tires (air-filled), rear tire size: 400/80-24, overall weight: 7,360 kg, total height: 2,480 mm, total length: 5,000 mm, total width: 2,350 mm, fuel: diesel, motor model: TD3.6L4, MANITOU MT 1030 easy 75D – Telehandlers TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 9.640 mm Closed height: 2.480 mm Mast: Standard Fork length: 120.501.200 mm Fork carriage: FEM 3A Hfsdpfxoz Aqfto Ac Ael Drive: 4-Zyl.-Diesel Engine: Deutz TD3.6L4 Tyres: Luft 400/80-24 (40%) / 400/80-24 (60%) Service weight: 7.360 kg Length: 5.000 mm Width: 2.350 mm Year of manufacture: 2017 Operating hours: 1.360 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, CE certificate Also available for rent – Rental price on request. Internal no.: 1102790 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,135 h, load capacity: 4,000 kg, lifting height: 9,600 mm, free lift: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,390 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 9,300 kg, total length: 5,170 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid frame Load center: 500 Hfedez Am A Ijpfx Ac Asl Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 460/70R24 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 460/70R24 Rear tire condition: 40 - 60% Battery voltage: 24V Battery type: Starter Battery year of manufacture: 2018 Battery condition: 40 - 60% 3-point hitch, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, air conditioning, full free lift, CE certificate, joystick, rotating beacon, seat

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 5,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,000 mm, power: 55 kW (74.78 HP), fork carriage width: 1,020 mm, fork length: 1,200 mm, empty load weight: 5,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift, rigid frame Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Hfsdpfx Acoz Am Azs Asl Mast type: Telescopic Speed class: 20 Condition: Like new Technical condition: New Front tire type: Pneumatic Front tire size: 300/75 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 300/75 R18 Rear tire condition: 80 - 100% Battery voltage: 24V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, fully enclosed cabin, air conditioning, full free lift, CE certificate, LED, seat, Premium equipment package

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 9,955 h, load capacity: 4,000 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: telescopic, drive type: Diesel, Rotating telescopic handler Mast type: Telescopic Condition: As new Technical condition: very good Hjdpfsz Amr Ajx Ac Ajfl Description: Perkins engine. Rotating man basket + forks. Machine fully serviced and ready for work. Heater, fully enclosed cab.

Condition: used, functionality: fully functional, machine/vehicle number: MT933, Year of construction: 2020, operating hours: 1,650 h, load capacity: 3,300 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,300 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,640 kg, total length: 4,680 mm, drive type: Diesel, construction width: 2,330 mm, Rigid telehandler Chassis number: MT933 Load center: 600 Mast type: telescopic Transmission: torque converter Speed class: 20 Condition: ready for operation and fully functional Technical condition: good Front tire type: pneumatic Hsdpfx Acoz Alxno Asfl Front tire size: Alliance 400/80 - 24 - 162A8 Front tire condition: 80 - 100% Rear tire type: pneumatic Rear tire size: Alliance 400/80 - 24 - 162A8 Rear tire condition: 80 - 100% Description: The MT 933 telehandler meets all requirements for material handling tasks on construction sites with medium-height buildings. Simplicity and productivity are the core concepts of this machine. The spacious cab provides excellent all-around visibility and features an ergonomically arranged control layout, ensuring all key operating elements are within easy reach for more effective maneuvering. The maximum outreach of 6.5 m allows for a large working area. The powerful MT 932 offers a lifting height of 9 m and a lifting capacity of 3.2 t. Thanks to the 3 steering modes, 4-wheel drive, and a turning radius of 3.72 m, it will prove a valuable asset on congested job sites. 3rd hydraulic circuit,

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Rotating forklift Magni RTH 6.31 Hfjdszz Tixspfx Ac Aol Drive Diesel Year built 2026 Lifting height (mm) 31,000 Lifting weight (kg) 6,000

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 345 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic handler, rigid frame Mast type: Telescopic Speed class: 20 Technical condition: very good Front tire type: Air Front tire size: 500 80 24 Front tire condition: 80 - 100% Rear tire type: Air Hedpfx Acozz Dg Io Aofl Rear tire size: 500 80 24 Rear tire condition: 80 - 100% Description: Are you looking for an efficient, powerful, and comfortable machine? Then the MLT 733, with at least 115 hp, a telescopic loader designed for agricultural transport work, with a lifting height of 6.88 m and a lifting capacity of 3.3 t, is just the thing for you! Top priority: comfort. This machine is characterized by a completely new, easily accessible cabin with optimal visibility, the JSM® (Joystick Switch and Move) with adjustable armrest, DSB (Double Switch Buttons), and sound insulation ideal for long working hours. Top priority: performance. With this telescopic loader, you will achieve extraordinary results thanks to the 115 hp Deutz engine and a hydrostatic transmission. Its self-locking differential, its ground clearance of 41 cm, and its automatic reversing fan are perfectly suited for use in agriculture. Top priority: efficiency. The MLT 733 with at least 115 hp is equipped with a control pump (up to 150 l/min), 3rd valve, rear work lights, front work lights, and air conditioning.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 13,800 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! The UVV certification is valid until 10/2027! Maintenance and servicing have always been carried out according to the manufacturer's intervals. TECHNICAL DETAILS Hsdpfozzxv Djx Ac Aefl Load capacity: 3.8 t Lifting height: 13,800 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Tire condition Condition of front right tire: Approx. 80% Condition of front left tire: Approx. 80% Condition of rear right tire: Approx. 80% Condition of rear left tire: Approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2027 Fork carriage Seat cover Spare key Documents Side shift Supports Leveling system

Condition: used, machine/vehicle number: 6487, Year of construction: 2016, operating hours: 1,287 h, overall weight: 5,200 kg, enginetype: Diesel, manufacturer: Merlo Hfodpfxozzui Tj Ac Aol

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 5,900 h, load capacity: 4,500 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: free lift with telescopic boom, power: 88 kW (119.65 HP), gearing type: automatic, ground clearance: 430 mm, overall weight: 15,050 kg, empty load weight: 15,050 kg, Equipment: CE marking, air conditioning, cabin, Merlo Roto 45.21SM – rotating telescopic handler – extensive range of accessories For sale is a Merlo Roto 45.21 with extensive equipment and versatile applications. Technical data: Max. lifting capacity: 4,500 kg Max. lifting height: 20.8 m Max. reach: 18.0 m Upper carriage rotation: 600° Engine: Deutz 4-cylinder diesel Power: 88 kW / 120 hp Travel speed: up to 20 km/h Weight with load fork: approx. 14,900 kg Accessories / Equipment: Hsdpfezzrvdex Ac Ajfl Load fork Personnel platform / work platform Bucket 4-ton winch The combination of high lifting height, high lifting capacity, and rotating upper carriage makes the Merlo ideal for construction, assembly, industry, and lifting operations. With its extensive range of accessories, the machine can be used in a particularly flexible manner.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 25.90 m · Maximale seitliche Reichweite 21.70 m · Gesamtlänge mit Gabeln 9.28 m · Länge bis zur Vorderseite der Gabeln 8.08 m · Gesamtbreite 2.50 m · Gesamthöhe 3.10 m · Gesamtbreite der Kabine 0.96 m · Bodenfreiheit Maschine 0.38 m · Radstand 3.05 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Drehung des Oberwagens 360 ° · Gewicht 18000 kg · Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 100 mm x 60 mm · Reifenmodelle 445/65 R22,5 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang Hfjdpfxozzrtco Ac Ael · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FHT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung 156 Hp / 115 kW · Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Kühlsystem des Motors Wasserkühlung · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatisch · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 8600 daN · Parkbremse Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Fassungsvermögen des Kraftstofftanks 270 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 68 dB · Umgebungsgeräusch (LwA) 108 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,170 mm, - Max. Tragkraft 6000 kg - Max.Hubhöhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar Hedpfx Ajzzrr Eec Asfl - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 645 h, load capacity: 6,000 kg, lifting height: 21,800 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, fork carriage width: 1,030 mm, fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic forklift Hfodpezy Tl Rjfx Ac Aol Load center: 500 Fork width: 100 mm Fork thickness: 60 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 20 Condition: As new Technical condition: Good Front tire type: Air Front tire size: 445/65 R22-5 Front tire condition: 60 - 80% Rear tire type: Air Rear tire size: 445/65 R22.5 Rear tire condition: 60 - 80% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2023 Battery condition: 60 - 80% 3rd valve, 4th valve, heater, dust filter, full cabin, full free lift, CE certificate, scale, interior mirror, exterior mirror, windshield wiper, seat, quick-change coupling for 3rd hydraulic function, quick-change coupling for 4th hydraulic function, Easy Link module, TÜV preparation: 20 km/h, attachment recognition system.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 29,900 mm, fork length: 1,200 mm, total length: 9,140 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 29.90 m · Maximale seitliche Reichweite 25.90 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Turret rotation (Max.) 360 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FTT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW · Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatic with Speedshift · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 9200 daN · Parkbremse Automatische negative Parkbremse Hedpszy Spnofx Ac Ajfl · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Hydrauliköl 300 l · Fassungsvermögen des Kraftstofftanks 320 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 67 dB · Außenschallpegel (LwA) 108 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 444 h, load capacity: 2,700 kg, lifting height: 5,900 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 1,960 mm, power: 55.16 kW (75.00 HP), overall weight: 4,850 kg, Equipment: CE marking, UVV, all wheel drive, cabin, front guard, lighting, sideshift, We are selling a Merlo P27.6Plus diesel telescopic handler with the following specifications at a net price of €71,200.00: Merlo P27.6Plus / 2023 / Used 4-wheel telescopic handler for sale at MABO Gabelstaplerservice GmbH MABO Gabelstaplerservice GmbH offers: * Purchase and rental of new and used forklifts or warehouse equipment Hsdpfxszy Ng Do Ac Asfl * Purchase of warehouse equipment or forklifts * Comprehensive service – on-site or in the workshop * Training for forklift operators!

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 3,800 kg, lifting height: 6,910 mm, free lift: 6,910 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 95 kW (129.16 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,500 kg, total length: 5,030 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Hjdpfxozyxcuo Ac Aefl Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 35 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cab, air conditioning, CE certificate, exterior mirrors, LED, seat

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 9,100 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,440 kg, total length: 5,120 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Hfedpszyxcnefx Ac Ajl Speed class: 40 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% 3rd valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat Equipment: Classic

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,621 h, load capacity: 4,100 kg, lifting height: 7,600 mm, free lift: 7,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, power: 105 kW (142.76 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 9,160 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid mast Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 460/70 R24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 Rear tire condition: 80 - 100% Hfedpfxezyd Ezj Ac Ael 3-way valve, rear work light, front work light, heater, particulate filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat, Easy Connect + Link, tilt function cut-off, LED work light, TÜV 40 km/h

Condition: new, functionality: fully functional, Year of construction: 2027, load capacity: 6,000 kg, lifting height: 29,900 mm, fuel type: gasoline, mast type: telescopic, construction height: 3,100 mm, power: 127 kW (172.67 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, empty load weight: 21,800 kg, total length: 7,940 mm, drive type: Benzin, construction width: 2,500 mm, Rotating telescopic forklift Fork width: 100 mm Hsdpfszydl Ijx Ac Aofl Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Speedshift Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Rear tire condition: New Description: Machine completely workshop-tested, cleaned, and newly inspected and certified according to UVV (German accident prevention regulations)! Tilting fork carriage CAT 1320mm with ISO fork tines Rear work light, front work light, heater, full cabin, CE certificate, interior mirror, LED, seat, - Tires - AEOLUS - AGP23- 445/65 R22.5 169F - Interior rearview mirror - LED work lights front and rear - High-capacity starter battery - 2x12V - 180 Ah - 1200 A - Wheel chocks - Adaptation for road approval - Easy Link - CE machine approval

Condition: new, functionality: fully functional, Year of construction: 2027, load capacity: 6,000 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Fork width: 100 mm Fork thickness: 60 mm Hedpozydlzjfx Ac Asfl ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Speedshift Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Rear tire condition: New Description: Machine completely workshop-tested, cleaned, and new UVV and inspection passed! Tilting fork carriage CAT 1320mm with ISO fork tines Rear work light, front work light, heater, full cab, CE certificate, interior mirror, joystick, LED, seat - Interior rearview mirror - LED work lights front and rear - High-capacity starter battery - 2x12V - 180 Ah - 1200 A - Wheel chock - Easy Link - Tires - AEOLUS - AGP23 - 445/65 R22.5 169F

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 55 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,980 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Technical condition: New Front tire type: Air Front tire size: 400-55 R17.5 149A8 Front tire condition: 80 - 100% Rear tire type: Air Rear tire size: 400-55 R17.5 149A8 Rear tire condition: 80 - 100% Description: The MLT 625-75 H telescopic handler is a very compact machine. It was specifically designed for agricultural applications and will assist you with all your daily tasks on your farm. Its very compact dimensions guarantee unparalleled maneuverability and allow it to operate in buildings and confined spaces. The comfort of the cab, the sound insulation (max. 76 dB), the 360° all-round visibility, and the JSM (Joystick Switch & Move) ensure long working days in complete safety with minimal fatigue. The Easy Connect System (ECS) simplifies the changing of attachments on the boom head, and the large number of compatible attachments provides the versatility you need for your operation. The hydraulic movements are precise and smooth, and the 4 drive and steering wheels, which can be used in 3 different steering modes, allow you to react to any situation. Hfjdpfx Acszyda Sj Aol 3rd valve, rear work light, front work light, heater, STVZO compliant, full cab, air conditioning, CE certificate, interior mirror, exterior mirror, rotating beacon, windshield wiper, Brief description and equipment: -Classic package -Quick-release device for engine oil -Diesel preheater -Full cab with heater -Mechanical Grammer textile seat -Sun visor for front and roof window -Interior rearview mirror -Car radio -Phone holder -Work lights for front left and right -Work lights for rear left and right -Mirrors on the rear of the machine -Roof windshield wiper -Additional double-acting hydraulics on the telescopic boom -Fork carriage -Fork tines 1200mm -CE declaration