DASKOM CNC-Technik

Condition: good (used), Year of construction: 1997, Used Lathe DANOBAT TCN-12 CNC, 1500 mm, Fanuc 0-T, Year of Manufacture 1997 Swing over bed 670 mm Swing over carriage 525 mm Distance between centers 1500 mm Hjdpfx Acszz Rv Ne Ajfl 12-position tool post CNC control: Fanuc 0-T Chip conveyor

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Hfodpfozz Rd Tsx Ac Ajl Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 02260005181, overall weight: 6,500 kg, CNC turning machine Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of manufacture: 2005 Control system: Siemens 840D ShopTurn Swinging diameter: 680 Chuck diameter: 250 Drive power 40/100% duty cycle: 37/25 kW Speed range: 20-5000 rpm Weight approx.: 6500 kg - 12-position turret - VDI 40 Hfodpjzvmhdsfx Ac Asl - C-axis - Y-axis - Driven tools, 12 stations - Chip conveyor - Tailstock - SMW Autoblok 250 BH Subject to change without notice.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm swing diameter: 500 mm centre height: 250 mm Hsdozu Ndlopfx Ac Aefl control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm MACHINE DETAILS Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Hfjdjzuwx Dopfx Ac Asl Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, turning diameter: 630 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, spindle motor power: 18,500 W, total height: 1,765 mm, total length: 3,700 mm, total width: 2,290 mm, workpiece weight (max.): 600 kg, spindle nose: D1-8, Equipment: documentation/manual, - A 2003 model of a single-slide lathe is for sale. - Complete documentation, including all maintenance reports, is available. - Chip conveyor included. - New cutting tool is available. - VDI documentation is included. - Ready for production. - Available immediately. - SIEMENS 810 control system. - Self-centering steady rest. Hodpozqzx Hefx Ac Asfl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,176 h, functionality: fully functional, machine/vehicle number: 02260007541, turning length: 600 mm, turning diameter: 680 mm, spindle speed (max.): 5,000 rpm, controller model: Siemens 840 D, power: 25 kW (33.99 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 600 mm Turning diameter: 680 mm Maximum spindle speed: 5,000 rpm MACHINE DETAILS Control system: Siemens 840D Hfedpfezpxgfox Ac Ael Spindle power: 25 kW Spindle operating hours: 65,176 h EQUIPMENT Chip conveyor Self-centering chuck: 250 mm diameter

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control Hfjdpozpw Dpsfx Ac Asl C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: refurbished (used), Year of construction: 1992, turning diameter over cross slide: 800 mm, turning length: 3,100 mm, turning diameter: 550 mm, spindle speed (max.): 350 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 3,000 mm, Very clean Heid S500 CNC Lathe with closed slide. Hjdjzl H Tlepfx Ac Aefl Diameter 800mm over slide Diameter 550mm over carriage Total turning length capacity 3100mm In 2018, the CNC unit was completely replaced, and a Fagor 3-axis control system was installed. The machine is in working condition and can be seen in operation.

Condition: good (used), Year of construction: 2006, CNC - lathe machine Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year: 2006 SPECIFICATIONS Max. turning length: 1.250 mm Max. swing over bed: 600 mm Max. swing over slide: 410 mm Spindle bore: 90 mm Amount of controlled axes: 2 Hfsdpsziyz Defx Ac Asl Spindle speeds: 3.000 rpm Spindle power: 36,5 / 27,5 kW Torque: 785 Nm Tailstock: MK 5 Quill: 80mm Amount of turrets: 1 Tool: VDI 40/8 Tool capacity: 8 Machine weight: 5.500 kg Req. space (LxBxH): 5,0 x 2,0 x 2,2 m m Equipment Chip conveyor 3-jaw chuck: 315 mm Main Spindle: neu gelagert Innenraum neu lackiert Wartungspaket

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm Hedpfx Acozhaqvs Aofl 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: used, Year of construction: 2005, turning diameter 680 mm turning length 600-635 mm control Siemens Hjdpfjzgxfvjx Ac Asfl weight of the machine ca. 6500 kg

Condition: excellent (used), SPINNER TC600-65 SMCY | Year of manufacture 2012 | Y-axis | BMT45 | driven tools | Siemens 840D | 15 bar HPC For sale is a high-quality CNC turning center, the SPINNER TC600-65 SMCY, manufactured in 2012. Technical data: Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Type: TC600-65 SMCY Year of manufacture: 2012 Machine number: AT0560 Hsdszgvgkjpfx Ac Asfl Working area: • Max. turning diameter: 400 mm • Max. turning length: 650 mm • Max. swing diameter: 600 mm • Travel in X-axis: 275 mm • Travel in Y-axis: mm • Travel in Z-axis: 700 mm • Spindle bore: 65 mm Tool system: • 16-position turret BMT45 • 16 driven tool stations • Spindle orientation • Tool measurement in the working area Control system: • Siemens 840D Equipment: • Y-axis for complex milling and drilling operations • 16-position BMT45 turret with driven tools • Direct measuring system in the X-axis • Tailstock • High-pressure coolant system 15 bar • Automatic sliding door • Robot interface for automation solutions • Hardened and ground slideways • Heavy-duty, FEM-optimized machine bed made of cast iron • High vibration damping for precise machining results Electrical data: • Mains connection: 400 V • Frequency: 50 / 60 Hz • Operating current: 53 A • Rated current: 63 A ✔ Y-axis and driven tools for complete machining ✔ Automation-ready via robot interface ✔ Powerful Siemens Sinumerik ONE control system Bar loader: CUCCHI GIOVANNI CNC-DB70 Stand loader 3300mm, 12-70mm diameter Year of manufacture 2012 is included in the price. The machine is in technically perfect and well-maintained condition and can be inspected under power by appointment. Further technical documentation, accessory lists, videos, as well as information on price and availability are available upon request.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Hfodpezgufrefx Ac Ajl Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), Year of construction: 2005, 1 used CNC lathe with driven tools and Y-axis. Hjdpfezgtgbjx Ac Aofl Control system: Siemens. The machine can be inspected while powered on, by prior arrangement.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,043 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 1,560 mm, spindle motor power: 42,000 W, total height: 2,850 mm, total width: 2,400 mm, overall weight: 16,000 kg, bar diameter (max.): 102 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D shopturn, product length (max.): 7,200 mm, workpiece diameter (max.): 610 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis EMCO MT 110X 1500 M/S was manufactured in 2007. It features an impressive X-axis travel of 410 mm and Z-axis travel of 1560 mm, with a maximum turning diameter of 610 mm. The machine is equipped with a powerful 42 kW spindle and offers live tooling capabilities. If you are looking to get high-quality turning capabilities, consider the EMCO MT 110X 1500 M/S horizontal turning machine we have for sale. Contact us for further details. • C-Axis Resolution: 0.001° • C-Axis Rapid Traverse Speed: 1000 rpm • Main Spindle Type: A2-11" • Maximum Turning Diameter: 610 mm • Swing Over Cross Slide: 550 mm • Swing Over Bed: 820 mm • Distance Between Centers: 1500 mm • Tailstock Stroke: 820 mm • Steady Rest Stroke: 1020 mm • Total Connected Load: 42 kW • Turret Interface: VDI 50 mm (DIN 69880) • Maximum Coolant Pressure Through Turret: 25 bar • Live Tool Stations: 12 • Live Tool Interface: DIN 5480 • Live Tool Speed Range: 0–4000 rpm • Live Tool Power (25% ED): 10 kW • Tailstock: Yes • C-Axis: Yes • Electrical Supply: 400 V • Frequency: 50 Hz • Phases: 3 • Rated Current: 100 A • Connected Load: 70 kVA • Production Hours: 17,043 h Additional Tooling: • Large quantity of high-quality tooling available (optional) • Chip Conveyor: Optional Hfodpfezggiijx Ac Ajl Technical Specification Through-spindle Coolant Yes Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Hfodozfac Tspfx Ac Ael Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! Hedpfx Acezdztdo Asfl TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Speed of driven tools: 4,000 rpm Axes and tailstock Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Power: 45/37 kW EQUIPMENT C-axis Steady rest optional

Condition: used, Year of construction: 1978, Maximum turning diameter over the bed: 600 mm Hodpfozc Rylex Ac Aefl Maximum turning diameter over the cross slide: 390 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Hodpfezc Hmnjx Ac Ajfl Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing Hfedpfozaix Isx Ac Ael 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF Hfjdpfey Ewy Ssx Ac Asl - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 400 mm, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 630 mm, CNC Lathe Brand: Travis Model: TR-2 Hfjdjy Axzrspfx Ac Ael Year: 2006 CNC: Fagor 8055T Hydraulic chuck: 300 mm Distance between centers: 1,850 mm Swing over bed: 630 mm Swing over carriage: 400 mm Spindle speed: 2,500 rpm Tool turret: 8 positions Includes live center Lubrication: Automatic and centralized Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Schedule a visit to view the machine at the facility.

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Hodpfxeyyxh Ts Ac Asfl Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 315357, turning diameter over cross slide: 420 mm, turning length: 1,000 mm, turning diameter: 600 mm, spindle speed (max.): 3,200 rpm, controller model: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over cross-slide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main Spindle Speed range: 16 – 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool Turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS CNC control: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Floor space required: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hodpfx Acoyxmure Asfl Hydraulic unit Three-jaw chuck (Model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!