Bincan Metallbearbeitung

Condition: good (used), FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from FOBA. Dcjdjxlq Exspfx Acwjn The sensor is designed for use in YAG laser marking systems. Technical Details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / Laser Control Component Laser Class (System Use): 4 Wavelength: 1064 nm Laser Power (System Use): 70 W Pulse Power: 10 kW Pulse Duration: 70 ns Application: Spare Part / Component for FOBA Laser Marking Systems Condition: Used, Working Buy FOBA FD84S sensors and other items at great prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). Dsdpfx Asxlii Ajcwjcn The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site.

Year of construction: 2013, condition: ready for operation (used), Internal dimensions X/Y/Z: 1350mm/1100mm/1070mm, door dimensions X/Y: 1000mm/1000mm, volume: 50L, test pressure: 15bar, max. operating pressure: 8bar, max. load capacity: 350kg, machine dimensions X/Y/Z: 1500mm/1700mm/2150mm. Documentation available. An on-site inspection is possible. Dedpoxhnrzjfx Acwscn

Condition: excellent (used), 1 x leveling device for clamping materialographic specimens in specimen holders. Dodoxgp Nropfx Acwecn 1 x Struers specimen holder for clamping 6 specimens, Ø 40 mm, new – original packaging / opened 1 x Struers specimen holder for clamping 6 specimens, Ø 40 mm, used – original packaging / opened 2 x Struers specimen holders for clamping 6 specimens, Ø 30 mm, used 2 x Struers specimen holders for clamping 6 specimens, Ø 50 mm, used

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Dedpfxoxghn Tj Acwjcn

Condition: ready for operation (used), Struers LaboPol-5 Laboforce-3 Grinding and Polishing Machine Laboforce-3: Rotational speed: 250 RPM Applied force range: min. approx. 5 N - max. approx. 40 N LaboPol-5: Disc diameter: 200-230 mm Speed range: 50-500 RPM You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Interim sale reserved. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Dedpfjxfuhkex Acwocn Deviations from technical data as well as errors in the item description may occur and are reserved.

Year of construction: 2011, condition: ready for operation (used), Rübig GN 70/120-DUO Year of manufacture: 2011 The RÜBIG gas nitriding unit is an electrically heated system designed for gas nitriding processes in an atmosphere of pure ammonia or nitrogen mix, as well as for tempering in a pure nitrogen atmosphere at temperatures up to 650°C. The nitriding processes are automatically controlled using defined recipes created via PLC control. Nitrogen is used for purging the system and for cooling after nitriding. Dsdpfsxft Ivox Acwecn

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Dodpfxjxd A I Ae Acwjcn - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, type of cooling: air, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm Dcodsxd Az Nopfx Acwjn - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Djdpsxd Avtjfx Acwocn

Year of construction: 2020, condition: ready for operation (used), Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible. Dcsdpsxdc U Nefx Acwon

Year of construction: 2022, condition: used, EFD Induction Welder, Weldec 04 50/300, Input: 3 x 550v 72v, Output: 520v 2080v 50kw, S/No. NO-22-08-17547 (2022) Location: This lot is located in Birmingham, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dodpfx Acjxcnvcewocn

Condition: excellent (used), Osai Neomark 400 Nd-YAG laser marking machine Marking system particularly suitable for high production volumes and printed circuit boards with high packing density. The large working area and the resulting elimination of travel movements enable high-resolution and precise marking, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Dcsdpfxoxbck Es Acwsn Weight: 1300 kg Laser completely rebuilt Beam expander motor replaced All cooling hoses replaced You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Trumpf TruMicro 6 kW laser source Manufacturer: Trumpf Type: TruMicro 7050 laser source Power: 6 kW Cooling: Water System input power 380–460 VAC 3 phases Laser power: 750 W Dsdpfxoxaktlo Acwecn Wavelength 1030 nm Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 KHz Fiber diameter: 400 µm IP: 54 Dimensions: (WxHxD) 1460 mm x 1350 mm x 730 mm You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Dedpfx Ajw U T Ebscwecn Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Find more items - new and used - in our shop! International shipping costs upon request!

Operating hours: 43,927 h, condition: good (used), FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System FOBALAS F 94S Laser Marking System Laser Type: FOBALAS 100 CW/QS - ND:YAG Dedpjw U Timefx Acwjcn Power Class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Voltage: 15 V Wavelength: 1,064 Operating Hours: 43,927 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Instalatie de curatat uleiul de racire de la utilajele de rectificat .recircula uleiul de racire si il curata de impuritati . Folosind abocel . Pret 8900 euro . Dcjdsw Uf E Hjpfx Acwen

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Dcjdpsw S Tymjfx Acwsn

Condition: good (used), Small sandblasting system Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Djdpow R S Sfofx Acwscn Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures)

Year of construction: 2022, condition: used, machine/vehicle number: 22220001LWD, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Djdpfx Aew Npywocwscn

Year of construction: 2021, condition: used, machine/vehicle number: 21095009LWD, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Dcedpjw Npv Ejfx Acwen

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: Y2311/355, The powerful fiber lasers of the Y-Series are ideally suited for industrial product marking. They are used in almost all metal and plastics processing industries for precise and economical direct part marking (DPM / Direct Part Marking) of products and components: from automotive manufacturing to medical and security technology, and all the way to electronics. All types of codes (QR codes, DMC / DataMatrix codes, barcodes), alphanumeric characters, logos, and inscriptions are marked reliably and with high precision using these fiber lasers. The optionally integrable camera system in the marking head ensures zero-defect quality and process reliability through automatic optical validation and verification steps. With its modular design, this fiber laser series offers maximum flexibility and enables straightforward adaptation to product-specific marking requirements as well as easy integration into production lines and FOBA workstations: Nine fiber lasers of different power classes and pulse widths are combined within a modular platform. Marking field calibration and parameter sets for optimizing marking quality, accuracy, and speed enable optimal configuration for any given application. Dsdpfx Acsw Npvfewjcn Main application areas: Medical technology, automotive manufacturing, automotive supply industry, integrators, plastics and metal processing industries, mechanical engineering and tool construction, electronics industry, security technology, ID and personalization sector (card, ID, and passport personalization), stationary and continuous marking applications.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: X2001/023, Titus™ is the smallest, lightest, and easiest-to-integrate laser marking head in the world. That’s exactly what makes Titus™ ("tiny tubus") so outstanding, and why the world’s smallest laser marking head will remain compact. This makes it the ideal solution wherever production environments have limited space: with Titus™, the new 20 W and 30 W fiber laser markers Y.0200-xs and Y.0300-xs are not only incredibly small, but also extremely easy to integrate. This opens up new application areas for rapid direct part marking with lasers, especially in the automotive, aerospace, and electronics industries. Thanks to its high integration flexibility, strong throughput, and significant operating cost savings, Titus™ enables customers to fully realize their marking potential. Think small. Achieve bigger. Dcsdpfx Acow Nprgjwjn Main fields of application: Electronics industry, automotive manufacturing, automotive supply industry, system integrators, plastics and metalworking industries, mechanical and tool engineering, marking on stationary or moving parts.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2002/018, Y2002/034, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Dodjw Npfgepfx Acwecn Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: like new (used), Year of construction: 2003, operating hours: 800 h, functionality: fully functional, Rösler vibratory finishing system consisting of a centrifuge type Z800 HA Turbo Floc, vibratory trough type R220 EC, and dryer type RT150 Euro. All machines are from 2003 and have been used only very rarely, therefore they are in almost new condition both in their lining and paintwork! All operating manuals for each machine are included! Dsdpfx Acjw Idgcjwocn