PARTZSCH Elektromotoren GmbH

Condition: ready for operation (used), A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Kodpfx Asy Tn Nyobtolt

Year of construction: 2009, condition: ready for operation (used), A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Kedpfjy Tn Nmjx Abtslt

Year of construction: 2010, condition: ready for operation (used), A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, max. cable diameter with dancer arm system: 35mm, max. operating speed: 143rpm, machine dimensions X/Y/Z: approx. 1300mm/300mm/1700mm. Documentation available. An on-site inspection is possible. Kjdoy Tn Icjpfx Abtolt

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2Wire EDM machineWorkpiece height: approx. 250 mmWorkpiece weight: approx. 400–500 kgTable size: approx. 600 x 400 mmSupply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA.Wire EDM technology, automatic wire feed, hydraulic systems, robust construction.Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Klsdpfx Abjy S Ni Ejtjt Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2014, condition: ready for operation (used), A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible. Kljdpfx Abey I Ac Rotot

Year of construction: 1997, condition: ready for operation (used), Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible. Klsdjy Eg Dmepfx Abtot

Year of construction: 2009, condition: ready for operation (used), Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard and numeric display, manual and automatic operation, foot pedal control, emergency stop button and emergency stop foot pedal, installed power: 5.5kW, length: 6705mm, width: 710mm, height: 1035mm, weight: 1220kg, oil tank capacity: 60l, electrical connection: phases: 3x6mm², ground: 1x6mm², equipment: support frame with control cabinet and hydraulic unit, fixed and movable bending bar, standard spare parts set, foot pedal (1x) + emergency stop foot pedal (1x), documentation available, on-site inspection is possible. Kedpoy A Slwefx Abtelt

Year of construction: 2024, condition: excellent (used), – Power – 3,5 kw – Managament – PLC Control Klsdpfx Aeyx E Hajbtot – One Appointments Units – Run out table – 15 m ( Possibility of upgrade ) – Diameter of block – 300mm – Wire diameter range – 1.8 – 3.2 mm – 1550 N/mm2 – Ring diameter – 300 – 420 mm - possible another diameter of rings – Capacity – 52,5 m2/8h for mesh with next characteristics : Ring diameter 350 mm – 9 coils Wire diameter – 3 mm Mesh dimensions – 10 x 5 m – dimensions of mesh – 10x 5 m ( possibly longer ) depends on the weight of the final mesh – Power – 3,5 kw ( complete line ) – Number of workers – 1 per shift

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) Kljdsyx Exiepfx Abtot .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Ksdjyxxy Hopfx Abtjlt

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Kjdeyxq Upopfx Abtolt

Year of construction: 1991, condition: ready for operation (used), A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible. Kljdpfx Abjyvuu Ujtjt

Year of construction: 1976, condition: ready for operation (used), A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible. Ksdpfx Absyvuu Iotslt

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Kjdoyvuuzjpfx Abtslt

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Kedpfjyuthisx Abtslt Type WM 2002/6 - 100, serial no. 2566

Condition: used, Manufacturer SCHNELL (Italy) Model barwiser 22 Main Characteristics Up to 22 mm *Images may not correspond to the real Kledpfx Absymcpgetjt

Condition: used, SCHNELL Automatic Stirrup bender PRIMA R 12 Full revamped “as new”, Up to 12 mm Main Characteristics - Single strand: 6 / 12,7mm - Double strand: 6 / 10 mm - Max bending angle: 180° - Central mandrel diam.: 20 / 50 mm - Max pulling speed: 95 m/mm to 310 m/mm - Max bending speed: 1450°/sec Klodsymcbiepfx Abtst - Bending distance: 1500 mm to 4´-11” - Avg. power consumption: 3 kW/h - Working pressure: 7 bar - 90/100 psi Single strand: 6 / 12,7mm Double strand: 6 / 10 mm Max bending angle: 180° Central mandrel diam.: 20 / 50 mm Max bending speed: 1450°/sec Bending distance: 1500 mm to 4´-11” Avg. power consumption: 3 kW/h Working pressure: 7 bar - 90/100 psi

Year of construction: 2006, condition: refurbished (used), SCHNELL Robomaster 6012 bending robot Currently in production Length: 12 metres Capacity: 3 bars of 40mm Ksdpfx Abjymb S Tjtolt Refurbishment time: 60 days max from order date. Length: 12 metres Capacity: 3 bars of 40mm

Year of construction: 2003, condition: used, SCHNELL Idea 12/25 assembly machine Machine recently dismantled in working order, production stopped. Kedpfx Abjymb Nrotjlt 3 payoffs Payoffs: 3

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm MACHINE DETAILS Kedpfx Asyf Aiwjbtslt Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Kodpfxjycwtfe Abtjlt

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. Klsdpfxjx R Uzdj Abtet On site viewing and inspection recommended

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Ksdpfxsxzikfo Abtolt

Year of construction: 1976, condition: used, Machinetype: Hinge joint fence machine Kljdpow Rq Avefx Abtet Make: WAFIOS Type: HJGM Constr. year: 1976 wire diameter range: 2,0-3,0 mm working width: 2000 mm vertical distance of wires: 150 mm

Year of construction: 2014, condition: like new (used), functionality: fully functional, • 4 bending rolls with long lifetime tungsten carbide inserts • Bending and breaking of scale in 2 levels (4 directions) • Outstanding bending angle (approx. 540° in total) • Very compact machine housing Kljdpfx Abewu Dxmetjt • Transport of scale by a scale waggon on wheels (screw conveyor optional) • Wire break control as an option • Wire diameter (low carbon) 5.5–6.5 mm • Wire diameter (high carbon) • Wire passing speed up to 3.0 m/s