LOC SYSTEMS GmbH

Condition: used, Year of construction: 2017, x-travel 1.000 mm y-travel 800 mm z-travel 700 mm Control Siemens 840D sl Operate spindle tunring speed 14.000 U/min torque 160 Nm power capacity 29 kW swivelling range 0 - 180 ° tool taper SK 40 rotary table adjustment 360 ° Rotary table dimensions 1.000 x 800 mm number of tool places 54 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - 40 bar internal coolant supply - Swivel milling head - Integrated rotary table - Workpiece touch probe with wireless transmission, Heidenhain TS 460 - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light - Siemens Sinumerik 840D sl Operate control with MDynamics - 5-axis machining package Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ndsdpoxzk Sdsfx Ah Dod Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: Heidenhain, controller model: 426-430, 5-axis area with X-axis travel: 1800 mm, Y-axis travel: 2000 mm, Z-axis travel: 2000 mm, and C-axis: 360 x 0.001 degrees. The spindle speed is 8000 rpm with an SK 50 tool holder. Tool changer with 60 positions, table size of 1700 x 1400 mm, and a maximum table load of 5000 kg. Nedsxzil Aepfx Ah Dodd

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, WE SELL AN VERY NICE CONDITION DMF 180 5 AXIS MACCHINE TOOL TAPER SK40 SPINDLE SPEED : 14.000 RPM Vorschubantrieb AC-Servomotoren für Achse X, Y, Z, B, C Vorschubgeschwindigkeit, stufenlos programm, (X,Y,Z) bis 20.000 mm/min Eilgang (X,Y,Z) 40 m/min Einrichtbetrieb (Betriebsart 2) (X,Y,Z) 20 – 2.000 mm/min Ndjdpfsxy Tq Tjx Ah Dsd Einrichtbetrieb (Betriebsart 3) (X,Y,Z) 20 – 5.000 mm/min Arbeitsbereich X-Achse 1.800 mm Y-Achse 700 mm Z-Achse 700 mm Schwenkkopf B-Achse min./max. +/- 110° Integrierter Rundtisch Ø 750 mm C-Achse nx 360°

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand HEIDENHAIN Nsdpfx Ajxy Tivjh Dsdd Model iTNC 630 Main Drive Number of axis 5 Movement X-Axis Movement 1520 mm Y-Axis Movement 700 mm Z-Axis Movement 600 mm This 5-axis SPINNER U-1520 was manufactured in 2012. It features a Heidenhain iTNC630 control, a 3D measuring probe, and both internal and air cooling systems. The machine includes an 89-position tool changer with travels of X=1520mm, Y=700mm, and Z=600mm. If you are looking to get high-quality milling capabilities, consider the SPINNER U-1520 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Available immediately from CH location : 5 axes machining center Reiden Type Reiden BRF 1 Ndsdsxy Rafspfx Ah Dod Year of construction 2005 Spindle renewed in 2022 ( 28.000.-Euro ) CNC control Heidenhain iTNC 530 Electronic handwheel Table diameter 800 mm Table load 800 kg X axis 1200 mm Y axis 600 mm Z axis 700 A axis minus 180 pkus 180 degrees B axis minus 90 plus 90 degrees SK 40 Magazine 72 places IKZ 20 Bar Number of controlled axles 5 Power on the spindle 25 kw Spindle speeds 0 - 6300 rpm Feed x axis 20000 mm / min Feed Y axis 20000 mm / min Feed Z axis 20000 mm / min Coolant device Chip conveyor Weight 9 to At a price of Euro 36.500.---plus VAT ex location

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Takumi VC1052 in like-new condition, with many accessories Ndsdexy Nnzepfx Ah Djd year of manufacture 2016 Siemens 828D control with Shopmill auto power off X, Y, Z: 1060 x 520 x 610 mm spindle 12,000 rpm SK 40 taper through-spindle coolant 24-position tool changer chip conveyor with collection bin oil skimmer chiller 36 m/min rapid traverse electronic handwheel mist extraction filter complete documentation 2x Cuter SP150 x 250 vices 38x SK 40 tool holders set of clamping bars 3D probe complete setup ready for immediate milling and drilling machine is powered for inspection

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, The FPT DINO is a gantry-style milling machine engineered for precision machining of large components. Featuring a 2200 mm transverse stroke and an 18,000 rpm high-speed spindle, this machine balances volumetric capacity with superior finishing dynamics. Machine Dimensions (L x W x H): 12,434 x 4,700 x 4,622 mm. Supply Voltage: 400 Vac. Ndjdpfx Asxy Af Hsh Dsd Frequency: 50 Hz. Current Consumption: 116 A.

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the item within the specified period: between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel distances X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Main spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine stations: 46 Max. tool diameter (full magazine): 80 mm Max. tool diameter (partial magazine): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and Rapid Traverses Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe system Nsdpexxzqrofx Ah Dedd Technical documentation Note: Transport is expected to be carried out by a truck with a loading width of 3,000 mm.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 Ndjdpjxxpbfofx Ah Ded - NC rotary table B-axis

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Ndjdpfsxxpansx Ah Dsd Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Ndodpfx Ahsxxn Ukj Ded Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3450 kg Control Unit Brand Schüco Main Drive Spindle speed range up to 18000 rpm Number of axis 4 Movement X-Axis Movement 7530 mm Y-Axis Movement 1180 mm Z-Axis Movement 660 mm Nsdpfx Ajxxnggsh Djdd Additional Equipment Number of clamps: 8 This 4-axis SCHÜCO PBX AL-7200 was manufactured in 2008. It features a large X-axis travel of 7,530 mm, a Z-axis of 660 mm, and a maximum spindle speed of 18,000 rpm. The machine includes an 8-position tool magazine and is capable of machining from three sides, suitable for both aluminium and steel profiles. It comes with a SCHÜCO CNC control system and weighs approximately 3450 kg. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Nodpexxkllsfx Ah Dodd Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 15000 RPM Spindle motor power 46 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 2600 mm Z-Axis Movement 900 mm Y-Axis Movement 1100 mm This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. Ndedpfxjxxdtve Ah Dod Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling Njdpfxoxxdw Uo Ah Dsdd

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Ndedpfxexxamxs Ah Dod Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SX44T-1620237CFECH, travel distance X-axis: 1,525 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,300 mm, total length: 4,500 mm, total width: 3,500 mm, table width: 660 mm, table length: 1,675 mm, table load: 1,360 kg, rotary table diameter: 600 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7,000 g, input voltage: 400 V, input frequency: 50 Hz, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, HURCO VMX 60 SRTI CNC Universal Machining Center - Rated current: 65 A Ndodpjxw T Hcjfx Ah Ded - Power connection: 93 kW - C-axis travel: 360° - B-axis travel: ±90° - Number of T-slots: 6 - T-slot width: 18 mm - Slot spacing: 100 mm - Maximum uniform rotary table load: 500 kg - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 100 rpm - Tool diameter with full magazine: 75 mm - Max. total tool weight: 280 kg - B-axis positioning accuracy: ±7 arcsec - C-axis positioning accuracy: ±7 arcsec - B-axis repeatability: ±7 arcsec - C-axis repeatability: ±7 arcsec - Incl. mounted zero point clamping plate, plate dimensions: 400 x 400 mm The machine is equipped with a RENISHAW 3D probe and a chip conveyor. Note: The spindle inverter has been completely overhauled. TRANSPORT INFORMATION The machine can be transported on a truck with a width of 3000 mm. Important: The item must be collected by appointment between 19th and 23rd January 2026. FCA D-76571 Gaggenau – loaded onto truck.

Condition: good (used), Year of construction: 2017, operating hours: 13,864 h, functionality: fully functional, machine/vehicle number: S844W-16201A7DFECH, travel distance X-axis: 2,134 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, controller manufacturer: HURCO, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, table width: 865 mm, table length: 2,184 mm, table load: 2,268 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,381 h, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 300 mm, tool weight: 7,000 g, input voltage: 400 V, positioning accuracy: 0.001 mm, repeat accuracy: 0.005 mm, Equipment: chip conveyor, HURCO VMX 84 Swi CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 50 kVA - Rated current: 72 A - Travel range A-axis: ±90° - Spindle nose to table dimensions: 147 - 909 mm - Positioning accuracy B: ±10 seconds - Repeatability B: 10 seconds - Feed rate X and Y axes: 15,200 mm/min - Feed rate Z axis: 13,500 mm/min - Rapid traverse X and Y axes: 18 m/min - Rapid traverse Z axis: 13.5 m/min - Rapid traverse B axis: 33.3 m/min - Max. tool diameter with adjacent pockets empty, tool cover removed: 75/120 mm Ndsdpfsxw R Tmjx Ah Dsd - Tool change time: 2.5 sec - Chip-to-chip time: 21.6 sec The machine is equipped with a 3D probe, coolant system, and chip conveyor. Transport note: Note: The machine can be transported on a low-loader with a transport width of 3,000 mm. Attention: The item must be collected on a binding appointment to be scheduled between 19 and 23.01.2026. FCA D-76571 Gaggenau – loaded onto truck.

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travels: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul due: 08/2025 Equipment: Swivel head -90 degrees to +90 degrees, indexed at 2.5-degree increments NC rotary table, brand SEMPUCO, 400 mm Spindle speed: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through spindle External coolant Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport details – see PDF. Illustration, content, and information provided without guarantee and therefore non-binding. All other accessories visible in the photos and videos are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only includes the accessories explicitly specified here, in the order confirmation, and on the invoice. FCA (Free Carrier – loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: December 2025 Subject to prior sale / Payment due immediately upon completion of purchase Njdpfxsxw R Nzs Ah Dodd

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Ndsdpexw R I Defx Ah Dod Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Ndsdpfxexwlgzs Ah Dod Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale: CU 1000 machining center PILOTE TECHNOLOGIES (1998) 1000x500y500z, Fanuc OM CNC, 3 axes plus 4th axis rotary table, year 1998 Ndedpfx Aoxv Ah Toh Dsd

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. CNC control: Siemens 840D Solution Line Working range: X-axis: 1.600 mm Y-axis: 1.250 mm Z-axis: 1.600 mm B-axis: 360.000 x 0.001 deg. HV-axis 360.000 deg. Feed range: X/Y/Z: 30 m/min Feed force: 20 kN Rotary table torque: 25.000 N Pallet size: 1.000 x 800 mm Pallet load capacity: 3.000 kg Spindle speed: up to 8.000 rpm Tool holder SK 50-B Spindle motor power 37 kW Equipment: 2-station pallet changer 330-position tool changer (max. tool length 600 mm) Tool taper cleaning system Special cabin Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Ndodexvrk Ropfx Ah Ded Chip conveyor Workpiece measuring probe Manual books

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Njdpfxsxvrbij Ah Dedd Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column Nedpfexvlrbsx Ah Djdd - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!