Votecs

Condition: like new (used), Year of construction: 2025, Rotor diameter: 260 mm - Feed opening approx. 830 x 1100 mm - Rotor length: 830 mm - Motor: 18.5 kW - Hydraulic pusher - Single knife row Iedjyat H Aepfx Ahujtb - Chip screen - Low operating hours

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Cassel metal detector Approx. 40 linear meters of vibratory troughs Ijdpfsyat Dujx Ahustb

Condition: excellent (used), Year of construction: 1998, operating hours: 3,000 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Iodpfxsyar Hzs Ahuetb Last maintenance: 12/2024 Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations) Ijdpfxoyaq Sco Ahuetb

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm Itsdpfx Ajyaq Evohujb - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7610 Itsdoyaq D Sopfx Ahujb Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm Ijdpfjyaq A Iex Ahuetb - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW Itjdeyaqz Dspfx Ahujb - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. Itodpfx Asyaqbqjhujb The chipper is suitable for sawmill waste and small diameter logs. Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: used, Year of construction: 2013, Drum shredder TRH 200x650 3WL, 75 kW motor Itsdpfsyappaex Ahusb

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 500-5512, axle configuration: 1 axle, Equipment: type plate available, We are selling a Weima WLK 6 S shredder together with a Koppern grinder and transport system. Year of manufacture: 2002. For more information, please contact us. Itodpsyan Nljfx Ahusb

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Bruks Wood Chipper Year of manufacture: 2001 Technical condition: very good – after overhaul Technical data: - main engine power: 110 kW - Infeed opening: 700 / 400 mm - Rotor: 3 knives Itedpfxoyalfke Ahujb - Feed rollers: 12 units – 9 lower / 3 upper - Vibrating infeed conveyor: 40 m - Inclined discharge conveyor: 13 m

Condition: good (used), Year of construction: 2011, Slow-speed shredder with moving floor and dual-sided drive Rotor width: 1000 mm, diameter: 300 mm, fitted with 27 knives 2 x 18.5 kW motors Hydraulics: 2.2 kW Screen perforation: 2.2 kW With discharge auger Control system: Siemens S7 Itedpeyab S Tefx Ahuob

Condition: excellent (used), Catalogue number 7867 TECHNICAL DATA - Feed hopper inlet: 1000x1250mm - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm Iedpfx Ajyab H Rjhustb - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, functionality: fully functional, – very good condition – Austrian-made TECHNICAL SPECIFICATIONS: Isdpfeyabdcjx Ahujtb – hopper dimensions: 120 cm x 100 cm – power: 2 x 11 kW – four shafts – shaft length: 400 mm – shaft diameter: 300 mm – screen: Ø 30 mm – auto-reverse – dimensions (L/W/H): 140 / 130 / 200 cm – weight: 600 kg

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm Itsdpeyaalrsfx Ahuob - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: like new (used), engine power 18.5 kW Iedpfx Ahox Uqubjujtb hydraulic pressure drawer 15 mm screen year of manufacture 1994

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Iodsx Twd Tjpfx Ahuetb

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Itodpsx Twdmefx Ahueb

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately Itedpex Tp U Rofx Ahueb

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Itsdsx Tp Iqepfx Ahuob

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 196 1040, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Itsdsx Tp Hyepfx Ahueb

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm Iodpfx Ahsx Tpnqjujtb - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA Isdpsx Tg Hdefx Ahuotb - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm Itjdpfx Ahex Tg E Heuob - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)