Engelhardt Werkzeuge + Maschinen

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material Nwsdpjxzvuwsfx Af Tjp MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Adaptive cut ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2014, operating hours: 40,236 h, condition: ready for operation (used), General Data Machine weight 15000 kg Measurements height 2500 mm Dimensions Machine Length 12900 mm This Bystronic Bysprint Fiber 4020 was manufactured in 2014. It features a large cutting area with dimensions up to 4064 mm by 2032 mm and a maximum cutting thickness of 20 mm for steel. The machine supports a fiber laser source with 6000 W power, ensuring precise and efficient cutting. Consider the opportunity to buy this Bystronic Bysprint Fiber 4020 fiber laser cutting machine. Contact us for more information. Nodpjxzvtyjfx Af Towp Application Types Cutting

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Njdpfxoxzltve Af Tewp Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Bending

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Nsdpfx Afexzlr Sj Towp Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2005, operating hours: 60,000 h, condition: ready for operation (used), Main Drive Nwjdoxy Ti Nopfx Af Top Number of axis 4 Additional Equipment Hydraulic clamping Easy Form angle measuring system No tools required This 4-axis LVD PPEB 220/40 press brake was manufactured in 2005. It features hydraulic clamping and the Easy Form angle measuring system for enhanced precision. Ideal for those looking to enhance their metal forming capabilities. Contact us for more information about this machine. Application Types Bending

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Workpiece Njdpfx Asxy Tgzef Tjwp Workpiece X 3000 mm Workpiece Y 1500 mm This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. Nwjdpfx Afexywupj Top TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 10500 kg Movement Y-Axis Movement 400 mm This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine. Application Types Nwjdpfsxyl Rrox Af Tep Bending

Year of construction: 2020, condition: ready for operation (used), This TRUMPF Trubend 5130 press brake was manufactured in 2020. It includes a comprehensive set of tooling valued at €30,000 and programming software with a license transferable from Trumpf. Features include a CNC BendMaster, extended Y-axis stroke, 4-axis backgauge, and air-conditioned electrical cabinet. Ideal for precision bending with low operational hours. Contact us for more information about this machine. Nodpfx Afjxyl S Ae Towp Application Types Bending

Year of construction: 1989, condition: ready for operation (used), A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible. Njdpfjxyk Uiox Af Tjwp

Condition: used, year of last overhaul: 2017, Machine type: Tube pointing hammer machine (cold pointing) Tooling: 4 hammer jaws, hydraulically or pneumatically driven, acting simultaneously on the tube end. Application: Preparation of steel, stainless steel, or non-ferrous tubes for cold drawing. Scope of delivery: AVS 63 pointing machine Pipe separation Nwjdexydwqopfx Af Tep All available documentation

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC HMI Main Drive Number of axis 3 Additional Equipment Includes tube and mandrel rod support. Bending mandrel is hydraulically extendable with a programmable pre-release. Bending mandrel has automatic minimal quantity lubrication. Oil cooler equipped. This 3-axis TRACTO-TECHNIK Tubotron 30 CNC was manufactured in 2008. It features a programmable sequence control, Simatic Panel PC 677 for menu navigation, and manual or automatic operation modes. The machine includes a free-standing bending head, hydraulic pipe clamping, and a hydraulic long-neck chuck for precise positioning. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Njdpfx Afexx D Ako Tswp

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Nwjdpfx Ajxxzhwsf Tep

Year of construction: 1996, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Nwjdjxxzizopfx Af Tsp

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Nwjdsxxziujpfx Af Top

Year of construction: 2010, condition: ready for operation (used), For sale is a bending machine. Working length: 2500mm, maximum sheet thickness (at 400N/mm²): 3.0mm, weight: 3500kg. A viewing can be arranged by appointment. Nwjdpfx Aoxxl Nrsf Tep

Year of construction: 2002, condition: ready for operation (used), Media Power consumption 4 to 10 kW This TWIN SEAM KA 2000-3000 roll bending machine was manufactured in 2002. It handles coils up to 2000 mm wide and 7 tons in weight, producing channels from 140 x 140 mm to 2500 x 2500 mm. Efficient with a power consumption of only 4-10 kW, it offers high capacity production up to 10 tons per 8 hours. Contact us for more information about this machine. Nodpfx Asxxdrrof Tewp Application Types Bending

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Nedpfx Afoxxa U Ne Towp

Year of construction: 2018, condition: ready for operation (used), A hydraulic long folding machine/swivel bending machine Sperr & Lechner is available. Working width: 8000mm, max. sheet thickness steel/aluminium/stainless steel: 3mm/4mm/2mm, max. bending angle: 145°, throat depth: 1130mm, opening width: 180mm, back gauge: 1000mm. Machine dimensions X/Y/Z: approx. 10000mm/2100mm/2100mm, weight: approx. 7500kg. Documentation available. An inspection on site is possible. Nwsdpfjxxa Tlex Af Tsp

Year of construction: 1994, condition: ready for operation (used), A hydraulic plate shear BBM is available. Working width: 4000mm, max. material thickness: 4mm. An on site inspection is possible. Nwsdpexxa Tfsfx Af Top

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 6500 kg Main Drive Punching force 300 Kn This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching Nwsdpfx Ajxwzx Tsf Tsp

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops Nsdpfx Asxwvptef Tjwp - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 4500 Kg This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Application Types Nwsdjxwqv Uepfx Af Tsp Bending

Condition: ready for operation (used), Year of construction: 2000, operating hours: 39,700 h, Control Unit Brand DELEM Model DA 65 Additional Equipment CNC electro-hydraulic press brake / CNC Control Model: DELEM CNC control model DA 65 / Swivel control panel, front left / 2D graphic programming & product display / Tool & program library / CNC Controlled Axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis / CNC Controlled Backgauge (X axis) / CNC-Controlled Height Adjustment of the Backgauge (R axis) / CNC-Controlled Adjustment of the Fence Fingers (Z axis) / CNC-Controlled, Pneumatic Die Adjustment (I axis) / WILA Manual Table Crowning, incl. Analog Value Display / TRUMPF Hydraulic Upper Tool Clamping / TRUMPF Manual Lower Die Clamping / 1x Free-Moving 2-Hand / Foot Control / Rear Safety Device (Sliding Door) This 4-axis TRUMPF TrumaBend V130 press brake was manufactured in 2000. It features a CNC electro-hydraulic system with DELEM CNC control, offering precise bending with a pressure of 130 tons and a folding length of 3060 mm. The machine includes multiple CNC-controlled axes for enhanced flexibility and accuracy in operation. Consider the opportunity to buy this TRUMPF TrumaBend V130 press brake. Contact us for more information about this machine. Application Types Bending Nedpfx Afjxwflds Tswp

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm ntegrated pipe sawing line – standard version The integrated pipe sawing line is a fully automatic system for the precise machining of pipes and profiles. System components BM bundle loading magazine and separation unit Sawing module Safety equipment (protective fences, light grids, etc.) The bundle loading magazine is designed for pipe lengths of up to 9 m. The system enables damage-free separation and positioning of the pipes. Main technical data Feature Value Total length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Temperature range 15 °C – 40 °C Relative humidity max. 90 % Connection values Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Main fuse: 200 A Supply cable: 3 × 95 mm², 1 × 50 mm² PEN Nwjdpfx Aoxvn Sdof Tep Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry, filtered) Tube processing parameters Parameter Value Max. coil weight 5,000 kg Outer diameter 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Tube length (starting material) 3,000–9,000 mm Cutting lengths 150–3,000 mm Materials Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Saw blade width max. 3 mm Internal and external diameter inspection: Test mandrels with pressure force measurement (1–100 N) Repeat accuracy: ± 0.1 mm Performance data Machining speed depending on diameter, length and material Maximum workpiece weight per section: 25 kg Machining accuracy: ± 0.05 mm + sawing tolerance / max. ± 0.10 mm total Max. weight when stacking: 45 kg Positioning accuracy when stacking: 0.5 mm Corrosion protection All machine and safety equipment is coated with a high-quality primer. Machine colour: RAL 5010 Forster blue Safety devices: RAL 1003 signal yellow Carbide-compatible sawing technology