Metal-Handel

Condition: like new (used), Year of construction: 2024, clamping force: 2,700 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Bdsdsy U Hu Rspfx Apbjc Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: like new (used), Year of construction: 2024, clamping force: 24,000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL Clamping Force: 2,400 t (24,000 kN) CLAMPING UNIT Clamping force: 24,000 kN Opening stroke: 3,200 mm Max. daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Bdedpfxjy U Hphj Apbec Tie bar spacing (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Opening force: 614 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight PS: approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Maximum screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing rate (3-zone screw): 235 g/s Plasticizing rate (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating power: 97.4 kW DRIVE UNIT Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32°C inlet): 6.6 m³/h Cores: 3+3 Heating zones: 160 Cascades: 56

Condition: new, Year of construction: 2025, Clamping force: 1600 t Screw diameter: 70 mm Shot weight: 1490 g Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Bjdpjy Umpusfx Apbodc Shot volume: 1232 cm3 Type: Horizontal Drive: Hydraulic

Condition: like new (used), Year of construction: 2023, clamping force: 1,700 kN, Clamping force: 1700 t (increased) Screw diameter: 105 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 3721 cm3 Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes Bdjdjy Uk Emopfx Apbec Machine like new!

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Screw diameter: 105 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Bdsdpfxsy Ukfmo Apbsc Shot volume: 4160 cm3 Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Bdedpsy T Hy Dofx Apbsc Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s Bjdpfx Asy T Hd Nopbsdc MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: Bdsdpfx Ajy Tuhispboc - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bedpfx Aey R Eq Aepbodc

Condition: used, Year of construction: 1984, operating hours: 1,234 h, functionality: unexamined, machine/vehicle number: HE 1280, injection pressure: 160 bar, input voltage: 24 V, EPS MOULDING MACHINE - E.A HEITZ HE 1280 (WITH TOOLING). Industrial EPS (expanded polystyrene) steam chest moulding machine for production of foam packing components. Manufacturer: E.A Heitz (Germany) Model: HE 1280 - Towler Hydraulik Year: 1984 Type: Hydrulic EPS shape moulding press Control Voltage: 24V Max Pressure: 80/160 BAr Includes: Installed mould plates (multi cavity tooling) Material conveying unit (Con-Evator system) Hydrulic and steam system Bedpfx Aey N S D Tspbsdc

Condition: used, Year of construction: 2018, Serial No. 221921, Control unit by Engel, Type CC300, Clamping force 1,700 t, 2 injection units, rotary table, minimum/maximum mold height 800 - 1,600 mm, platen distance 3,350 mm, clear horizontal/vertical opening 1,850 / 1,415 mm, 16 cascade controllers, 64 hot runner zones, core pulls hydraulic 4 (moving side) / 4 (fixed side), screw diameter 105 / 50 mm, injection weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control by Oni, Type Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block module 125 °C, visualization unit, extraction handling by Engel, Type Viper 60, 5 axes (X,Y,Z,C,B-Axis), nozzle spacing 300 mm, year of manufacture 2018, Serial No. 221938, part enclosure, outfeed conveyor, mobile conveyor by Engel, Type BGR FB100 KMAT, year of manufacture 2018, Serial No. 2144098, L approx. 4,200 mm, W 1,000 mm, external temperature control unit and material dosing not included in this offer. Damage: Hydraulic hoses leaking. Bdjdsy I R Tqjpfx Apbec

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Bedsy Hqwyepfx Apbedc Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: excellent (used), Year of construction: 2016, clamping force: 13,000 kN, Clamping force: 1300 t Screw diameter: 105 mm Distance between tie bars V: 1270 mm Distance between tie bars H: 1570 mm Shot volume: 4546 cm3 Type: Horizontal Drive: Hydraulic KM1300 - 8100 MX Year of manufacture 2016 Bsdpfxey Emurj Apbjdc KM1300MX Clamping force ton: 1300 Tie bar distance: 1570 x 1270 mm Mould height min/max: 700/1400 mm Plate dimensions: 2210x1910 mm Opening stroke : 2350 mm Max Daylight Opening : 3050 mm Injection unit Type 8100 MX Screw diameter: 105 mm Max. Injection volume: 4546 cm3 Spec. Injection pressure: 1778 bar Centering ring size: 315 mm Hydraulic cores: 4 + 4 Number of heating sections: 32 for mould Number of cooling circuits: 8+8 Electrical cascades : 12 Cooling: 12 + 12 Hydraulic cicrle hot runner: 1x EUROMAP 6

Condition: ready for operation (used), Year of construction: 2011, clamping force: 11,772 kN, screw diameter: 130 mm, injection weight: 6,210 g, overall weight: 70,000 kg, Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details. Injection Unit • Injection unit size: 8300 • L/D ratio: 20 Bsdey Dua Tjpfx Apbsdc • Shot volume (theoretical): 8,630 cm³ • Max injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticizing capacity (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke with minimum mould height: 2000 mm • Opening stroke with maximum mould height: 1400 mm • Mould height: 600–1,200 mm • Max daylight: 2,600 mmPlaten & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Distance between tie bars (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mmPower & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 LPerformance • Dry cycle: 10 s

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Bdedpfxoyyyr Ts Apbec Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 57,752 h, clamping force: 13,000 kN, screw diameter: 105 mm, overall weight: 83,000 kg, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details. • International size designation: 12000 MC / 1300 • Operating hours: 57,752 hElectrical • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Motor total current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and power separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil cooled pump motor: IP54 • Cabinet cooling fanControl and HMI • MC4 32-bit microprocessor control • TFT color display • 3.5 inch floppy disk driveClamping unit • Hydraulic mechanical 2-platen clamping system • 4 pressure cushions integrated in moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operator side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mmInjection and plasticizing • PV controlled injection unit • Thermoplastic plasticizing unit, wear-resistant design • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticizing possible • Plasticizing unit: SP12000 • Maximum processing temperature: 450°C • Injection embossing control adjustable on screen • Injection stroke control • Holding pressure control • Injection speed controlHydraulics, lubrication, cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max 31°C • Cooling water pressure: 4–6 barTemperature control Bdjdpfx Ajyx Ez Repbsc • 8 temperature control circuits for hot runner • Adaptive temperature controllers • Maximum temperature controller power: 2 kW • 230 V temperature controller supplyMonitoring and software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage up to 20,000 cycles • Event log protocol • Alarm history • Graphical process curves • Trend graphics for 12 parametersInterfaces and connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • External temperature unit interface 20 mA • Central computer interface • BDE interface with 5 contacts • Potential-free contact for dosing unit

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Metering stroke: approx. 465 mm maximum screw travel during plasticizing • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data Bjdpfx Asywlvrspbedc • Machine alignment tolerance:

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm Bdodpfx Apsywg N Tsbjc size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color monitor integrated with the control console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Minimum mold height: 600 mm Maximum mold height: 1,200 mm Platen opening stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical-Hydraulic Equipment Rated drive motor power: 132 kW Installed heating capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions & Weight Net weight (with control cabinet): 73 t Bsdoyugfzopfx Apbsdc Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines. The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements. Key Benefits: - Reduction in electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Less heating of the hydraulic system - Increased longevity of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Bdodjyugalopfx Apbec Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Basic Information Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie bar clearance (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Machine Dimensions and Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Bjdpfxjyuf Tde Apbsdc Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, which enhances the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter that adjusts the motor speed to match the current demand during production cycles. As a result, electrical energy is consumed only when it is actually required. ESS System Benefits - Reduction of electrical energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Prolonged service life of the motor and hydraulic components - Retrofit capability for existing hydraulic injection moulding machines The ESS system allows for significant reduction in machine operating costs while maintaining full production parameters.

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Bjdpfx Asyt H Dhjpbodc Further information, photos, or inspection appointments are available upon request.

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment Bsdsyt Hy Nopfx Apbsdc * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description Two high-performance injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, specifically designed for the production of large-volume plastic parts and industrial series manufacturing. Each machine offers a clamping force of 23,000 kN, equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g—ideal for applications involving large components and high material throughput. Both units are provided with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. The machines originate from the years 1997 and 1998 and have been operated in an industrial production setting. Technical Overview: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year of manufacture: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year of manufacture: 1997 - Operating hours: approx. 99,030 h Shared technical data: Bsdpjyt Hidsfx Apbjdc - Clamping force: 23,000 kN - Screw diameter: 105 mm - Max. shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Machine dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm These machines deliver a reliable and field-proven solution for industrial plastics processing, making them especially attractive to companies seeking large-format injection molding capability.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ Bdjdpfx Ajyrrwkepbjc - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m