Drißner Tischlerei GmbH

Condition: used, Year of construction: 2001, number of spindles 6 working width 230 mm Nlodpoy Uy Uqefx Akueb planing height 160 mm Control ATS Driven table rollers 1 feed 24 m/min feed motor 4 kW Length of the planing table 2.500 mm Weinig Unimat 23 automatic planer and moulder for four-sided planing and profiling of timber with ATS system, reinforced Kaschwig shuttering protection cabin and universal spindle.

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units Nljdpfx Aey Ux Shjkusb - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 160mm, 5.5kW 3) vertical, left 160mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 7.5kW 6) horizontal, lower 230mm, 7.5kW 7) universal 360°, 230mm, 7.5kW Nlsdey Ux Ebjpfx Akuob - all spindles adjustable up/down, left/right - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000 rpm From above: - 6 feed rollers, toothed, metal, including 2 double rollers - 4 discharge rollers, rubber, including 1 double roller - 3 pressure rollers on the discharge side From below: - side pressure roller on the feed side - feed roller, toothed, pulling, swiveling in the lower table - 3 pulling rollers, metal, smooth - rollers pneumatically adjustable - length of the feed table 1190mm - central lubrication of the table - electric adjustment of planing thickness - body lifting motor 0.56kW - stepless feed speed adjustment via inverter 6-24m/min - feed motor 3.7kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 7x125mm - dimensions L/W/H 5100x2070x1900mm - weight approximately 5000kg ADVANTAGES – with 7 heads – universal spindle – ideal for wet and dry wood – spindles equipped with brakes - DTR documentation – used planer, very good condition Net price: 139900 PLN Net price: 33310 EUR depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm Nedpfxey Ux Dqs Akujlb - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOG NO. 7133 TECHNICAL SPECIFICATIONS - Max. working width: 220 mm - Max. working height: 120 mm – 5 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 120 mm 3) Left vertical, 120 mm; spindles 2 & 3: 11 kW 4) Top horizontal, 220 mm, 11 kW 5) Bottom horizontal, 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure hold-downs - Top: 4 powered, gear-driven feed rollers (including 2 double rollers) - Top: 1 double outfeed roller, smooth, rubber-coated - Bottom: powered outfeed roller, rubber-coated - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 2.2 kW Nlsdoy Ux Aaepfx Akujb - Lifting motor: 0.25 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction nozzle diameter: 4 x 120 mm, 1 x 140 mm - Dimensions (L/W/H): 3500 x 1550 x 1400 mm - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – German-manufactured – Not repainted – Used planer, in very good condition Net price: 43,900 PLN Net price: 10,450 EUR (according to exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Catalog number: 7888 TECHNICAL DATA Max. planing width: 410 mm Max. thickness of workpiece (double-sided): 200 mm Max. thickness of workpiece on side heads (four-sided): 140 mm – Top: Kickback fingers / anti-kickback devices 2 pull-in feed rollers, geared, spiral 2 rows of segmented pressure rollers Geared, spiral feed roller Pressure system 410 mm planing shaft, 4-knife – 5.5 kW Pressure system Smooth, outfeed feed roller – Bottom: Nledpfx Ajy Uxz Ajkusb Guide rail – present Adjustable infeed table with sliding roller 410 mm planing shaft, 4-knife – 4 kW 2 smooth sliding rollers – Rear: 2 side spindles 1) Right vertical 140 mm – 3 kW 2) Left vertical 140 mm – 3 kW Spindle diameter: 35 mm Spindles adjustable up/down and right/left Spindles positioned alternately 6 feed speeds Dust extraction outlet diameters: 2x100 mm, 1x150 mm, 1x170 mm Dimensions (L/W/H): 2170 x 1300 x 1260 mm Weight: 1603 kg ADVANTAGES – Suitable for wet and dry timber – Ideal for processing beams, flooring, etc. – Made by the German brand BAUERLE – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: not inspected (used), Year of construction: 1992, Planing width: 230 mm Planing height: 120 mm 6 spindles, including a universal spindle Spindle diameter: 40 mm Nljdpfxey Uxh As Akueb Short infeed table

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) • Right spindle motor: 5.5 kW (7.5 HP) • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW Nlodpfxoy Ukg Re Akueb • Total installed power: 28.6 kW Additional equipment • Safety cabin included

Condition: used, functionality: fully functional, Equipment: cabin, Leadermac Platinum 623 four-sided planer Working width: 15-230mm Working height: 10-150mm Number of spindles: 6 Spindle arrangement: Bottom: 7.5kw Left: 7.5kw Right: 7.5kw Top: 11kw Top: 11kw Bottom: 11kw First roller on the table, ribbed for wet wood Number of rollers on the working table: 3 Pneumatic material clamps Nlsdpfx Aksy Uhh Seujb Feed speed adjustable via frequency inverter: 6-30m/min

Condition: excellent (used), Year of construction: 1998, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping Nodpfxjy Uc T Aj Akuelb 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications Nlodpfx Akey T Rhxsuob - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR Nsdpjy T N Ahjfx Akuelb (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations) Nlodpjy T Nu Defx Akusb

Condition: excellent (used), functionality: fully functional, Edge bander for 6 workpieces, "SCM" model SUPERSET XL V380/50 - "CE" USED - VERY WELL MAINTAINED, STILL IN OPERATION [ID: cvn-088] - 6 workpieces: BOTTOM/RIGHT/LEFT with CNC/TOP/BOTTOM/UNIVERSAL - Working width: 230 mm - Tandem device for short pieces - Variable speed drive - COMPLETE WITH CUTTERS Nodpfx Akoy T Ndloujlb Available subject to prior sale.

Condition: good (used), Year of construction: 2003, Consist of : 4 x 6000 mm cross chain conveyers, mounted on floor 1 x TRANSLYFT lifting table, twin sissor model, 4000 x 1000 mm, max lifting capacity : 4000 Kg 4 x chain conveyers, 1000 mm, mounted on top of lifting table 1 x THOMAS PETTERSSON TP600 vacuum infeed device, mex width between vacuum suction cups : 4000 mm, ( can lift 6000 mm items. 1 x THOMAS PETTERSSON Electric cabinet 1 x driven band conveyer, 8000 mm Nedey Tzi Topfx Akuolb

Condition: used, Year of construction: 2001, Number of boring spindles 8 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 36 m/min. Control Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15" in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Nlsdpfoy Ty H Dex Akuob All spindles: CNC controlled (except spindle 6

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2904-3140, Four-sided planer with 8 cutters. Processing speed of 8-25 m/min. Planing width 200 mm, height 140 mm. Nledpfx Asy Tynhjkusb 1 horizontal spindle. 2, 3, and 4 vertical spindles. 5, 6, and 7 horizontal spindles, 8 universal spindles. 40 mm shafts, 230 mm heads. 1 motor 7.5 kW, 2nd motor 5.5 kW, 3rd motor 7.5 kW, 4th motor 4 kW, 5th motor 11 kW, 6th motor 11 kW, 7th motor 5.5 kW, 8th motor 5.5 kW. 4 kW gear motor.

Condition: excellent (used), functionality: fully functional, SCM Superset XL Four-Sided Planer Working width: 15–230 mm Working height: 6–120 mm Number of spindles: 5 Spindle arrangement: Bottom Right Left Nlsdpfx Aksy Ttryjueb Top Bottom Spindle speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable via variator: 5–25 m/min Driven by cardan shafts CE certificate

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: Nlodpoy Ti R Esfx Akujb - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW Nledpfxoy S R Ags Akusb 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2002, 5 stations + 1 milling unit Digital positioning Table lubrication Air cushions in the table Capacity: 230 mm / 120 mm Total power: 43 kW 380 V Equipped with 4 helical tool holders with inserts Machine documentation and service keys Machine overhauled and available in stock Nlsdpfxsy S Rkqe Akusb

Condition: not inspected (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Njdpfxjy S E Spj Akujlb Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Nledjy S Acxspfx Akusb

Condition: excellent (used), functionality: fully functional, SCM Superset XL four-sided planer Working width: 15-230 mm Working height: 6-120 mm Number of spindles: 6 Spindle configuration: Bottom Right Left Nedpoy Sr Nnefx Akuslb Top Bottom Universal / glazing bead saw unit Spindle speed: 6000 rpm Pneumatic pressure rollers Feed speed adjustable via inverter: 5-25 m/min Drive via cardan shafts CE certificate

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ----- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ----- > Spindle 1: Bottom > Spindle 2: Right (pneumatically actuated: up/down) > Spindle 3: Left > Spindle 4: Top > Spindle 5: Bottom > Spindle 6: Glazing bead saw (pneumatically actuated: up/down) Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glazing bead saw (2.2 kW, 6000 rpm, 40 mm diameter) Nedpfsy Spvrox Akuolb Additional Features ----- > Glazing bead separation feature (or usable as a grooving unit) > ATS Control (automatic) 2-axis positioning for width and height (left and top spindles) with program memory (99 programs) > Machine operation: Window package Joint control of the right spindle and the glazing bead outfeed via manual selector switch on the control panel > Spindles with mechanical digital displays ----- Price of the above-mentioned machine upon request! ----- Option: Used planer heads ----- (Technical specifications according to manufacturer – subject to change/without guarantee!)